• 대한디지털의료영상학회논문지
• /
• 제9권2호
• /
• pp.17-21
• /
• 2007

The purpose to recognize change of average pixel value of acquisition image by control panel's density and right set up method of speed (sensitivity) and exposure dose(mAs) change that dose in purpose digital flatpanel-detector. X -ray generator DHF-158H2(Hitachi, Japan). Detector CXDI 4OG(Canon, Japan), 12 : 1 grid and exposure ray 135 kVp, 250 mA, 10 ms. focus-detector distance 180 cm and used AEC mode. DICOM reflex analysis program used image J that is digital reflex analysis program that offer in United States America National Health Center(National Institutes of Health : NlH) phantom used chest phantom(Anthromorphic : Flukebrome.medicaI USA). An experiment chest phantom that consist by formation equivalence material use because density value( -3${\sim}$+3) in X-ray control panel and seep that is speed step(slow, medium, fast) each control experimentalize. image analysis reflex neted through an experiment using image j each image compare. These was change in dose according to slow, medium, fast and density's change in an experiment result. According to detector sensitivity and density condition set, dose was relationship dissimilarity 500% from 200%. The dose came highest when is density +3 to slow. and dose more increases gray scale's extent could know that rise. Could know whether how equipment set is important through this experiment. cause of disease which change by digital radiography system forward is thought to increase more, it is considered that suitable education by this and continuous interest about equipment need absolutely.

• 한국측량학회지
• /
• 제21권1호
• /
• pp.27-36
• /
• 2003

일반적으로 도심지역의 지형공간정보 취득은 대축척 항공사진영상을 이용하여 수치사진측량방법에 의해 수치 표고모형(DEM) 및 정사투영영상을 제작함으로써 수행되어지고 있다. 그러나 수치사진측량방법을 이용하여 도심지역의 지형공간정보를 취득할 때 가장 큰 문제점으로는 자동으로 추출되는 DEM의 정확도가 크게 저하되어 정사투영영상 및 수치지도의 정확도 역시 저하되는 문제점이 있다. 따라서 본 연구에서는 수치사진측량방법을 이용하여 도심지역의 DEM 정확도 향상방안에 대하여 연구함으로써 보다 정확한 도심지역의 지형공간정보 추출에 기여하는데 목적이 있다. 본 논문의 수행결과, 지형분류를 통하여 DEM을 각 지형별로 제작함으로써 일반적으로 사용하는 자동추출된 DEM에 비하여 DEM의 정확도를 크게 향상시켰으며 또한, 경계선추출방법을 적용함으로써 3차원 수치지도의 제작 가능성을 확인할 수 있었다.

• 한국측량학회지
• /
• 제14권1호
• /
• pp.17-25
• /
• 1996

스틸비디오 CCD카메라는 수치영상의 획득과정이 크게 단순화되어 컴퓨터에 직접 연결되지 않고도 독립적으로 수치영상을 획득하여 자체내에 영상을 저장할 수 있는 융통성을 갖추고 있다. 본 연구에서는 각종 산업분야에서 요구되는 품질검사, 구조물의 모니터 링 등에 스틸비디오 카메라를 이용한 수치근접사진측량 시스템의 수행성을 평가하고자 하였다. 수치 영상측정 에서 필수적 인 sub-pixel 측정기 법을 제시하고, 고해상도의 DCS420 스틸비디오 카메라에 대한 기하학적 자체검정 및 구조물에 대한 시험측정을 실시하였다. 자체검정 광속조정의 결과 1:46,000을 초과하는 대상공간 정확도를 얻을 수 있었으며 산업적 음용에 수치영상을 이용한 본 근접사진측량 시스템의 정확도 잠재성과 작업의 효율성을 입증할 수 있었다.

• 대한디지털의료영상학회논문지
• /
• 제8권1호
• /
• pp.27-32
• /
• 2006

The rapid development in digital acquisition technology in radiography has not been accompanied by information regarding optimum radiolographic technique for use with an amorphus silicon flat panel detector. The purpose of our study was to compared imaging characteristics and image quality of an amorphus silicon flat panel detectors for digital chest radiography. All examinations were performed by using an amorphus silicon flat panel detector. Chest radiographs of an chest phantom were obtained with peak kilovoltage values of 60$\sim$150 kVp. Published data ell the effect of x-ray beam energy on imaging characteristics and image qualify when using an amorphus silicon flat panel detector. It is important that radiographers are aware of optimum kVp selection for an amorphus silicon flat panel detector system, particularly for the commonly performed chest examination.

• 해양환경안전학회지
• /
• 제6권1호
• /
• pp.47-55
• /
• 2000

A three-dimensional digital image processing technique is proposed to quantitatively predict the dispersion phenomena of oil droplet onto the surface of the water. This technique is able to get the dispersion rate of an oil droplet three-dimensionally just below the surface of the water over time. The obtained dispersion rate obtained through this technique is informative to the investigation into the relationship among the gravity, surface tensions between oil, water, and air. This technique is based upon the three-dimensional PIV(Particle Imaging Velocimetry) technique and its system mainly consists of a three CCD(Charge Coupled Device) cameras, an image grabber, and a host computer in which an image processing algorithm is adopted for the acquisition of dispersion rate oil an oil droplet.

• 대한의용생체공학회:의공학회지
• /
• 제8권2호
• /
• pp.171-176
• /
• 1987

Wiener filtering method was applied to the dual energy imaging procedure in digital radiography(D.R.). A linear scanning photodiode arrays with 1024 elements(0.6mm H 1.3mm pixel size) were used to obtain chest images in 0.7 sec. For high energy image acquisition, X-ray tube was set at 140KVp, 100mA with a rare-earth phosphor screen. Low energy image was obtained with X-ray tube setting at 70KVp, 150mA. These measured dual energy images are represented in the vector matrix notation as a linear discrete model including the additive random noise. Then, the object images are restored in the minimum mean square error sense using Wiener filtering method in the transformed domain. These restored high and low energy images are used for computation of the basis image decomposition. Then the basis images are linearly combined to produce bone or tissue selective images. Using this process, we could improve the signal to noise ratio characteristics in the material selective images.

• 한국측량학회지
• /
• 제28권1호
• /
• pp.125-132
• /
• 2010

최근 다양한 센서의 개발에 따라 동일한 지역에 대한 다양한 데이터들의 취득이 가능하게 되었다. 이러한 다차원 데이터를 이용하여 도시모델, 변화 탐지 등과 같은 다양한 활용분야에 적용하기 위해서 각 데이터들 간의 정합과정이 필수적이다. 본 연구에서는 기 구축된 건물모델을 참조모델로 사용하여 디지털 영상을 자동으로 정합하는 방법을 제시하였다. 두 데이터의 정합을 위해 기 구축 건물모델에서 최적정합건물을 추출 하였으며, 이를 영상에서 추출된 직선정합요소와 비교하여 최적정합건물과 상응하는 점 좌표 쌍을 추출하였다. 또한 추출된 점 좌표 쌍을 이용하여 영상데이터의 외부표정요소를 재계산함으로써 두 데이터간의 정합을 수행하였다. 실험결과는 제안된 방법이 두 데이터의 정합을 효율적으로 수행하는 것을 보여준다.

• Structural Engineering and Mechanics
• /
• 제69권4호
• /
• pp.467-477
• /
• 2019

Digital image correlation (DIC) is now a popular and extensively used full-field metrology technique. In general, DIC is performed by using a turnkey solution offered by various manufacturers of DIC. In this paper, a simple and economical set-up for DIC is proposed which uses easily accessible digital single-lens reflex (DSLR) camera rather than industrial couple-charged device (CCD) cameras. The paper gives a description of aspects of carrying a DIC experiment which includes experimental set-up, specimen preparation, image acquisition and analysis. The details provided here will be helpful to carry DIC experiments without specialized DIC testing rig. To validate the responses obtained from proposed DIC set-up, tension and fatigue tests on specimens made of IS 2062 Gr. E300 steel are determined. Tensile parameters for a flat specimen and stress intensity factor for an eccentrically-loaded single edge notch tension specimen are evaluated from results of DIC experiment. Results obtained from proposed DIC experiments are compared with those obtained from conventional methods and are found to be in close agreement. It is also noted that the high resolution of DSLR allows the use of proposed approach for fracture characterization which could not be carried out with a typical turnkey DIC solution employing a camera of 2MP resolution.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1177-1179
• /
• 2003

Recently, the ground-based laser profiler is used for acquisition of 3D spatial information of a rchaeological objects. However, it is very difficult to measure complicated objects, because of a relatively low-resolution. On the other hand, texture mapping can be a solution to complement the low resolution, and to generate 3D model with higher fidelity. But, a huge cost is required for the construction of textured 3D model, because huge labor is demanded, and the work depends on editor's experiences and skills . Moreover, the accuracy of data would be lost during the editing works. In this research, using the laser profiler and a non-calibrated digital camera, a method is proposed for the automatic generation of 3D model by integrating these data. At first, region segmentation is applied to laser range data to extract geometric features of an object in the laser range data. Various information such as normal vectors of planes, distances from a sensor and a sun-direction are used in this processing. Next, an image segmentation is also applied to the digital camera images, which include the same object. Then, geometrical relations are determined by corresponding the features extracted in the laser range data and digital camera’ images. By projecting digital camera image onto the surface data reconstructed from laser range image, the 3D texture model was generated automatically.

• 대한치과의사협회지
• /
• 제43권10호통권437호
• /
• pp.662-671
• /
• 2005