• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.655-658
• /
• 2016

고성능 디지털 회로 구현에 매우 많이 사용되는 Xilinx사의 7-Series FPGA(Field Programmable Gate Array)는 configuration memory가 SRAM 기반으로 제작되어 configuration memory에 소프트 에러(soft error)가 발생하는 경우 FPGA는 오동작하게 된다. Xilinx사에서 제공하는 SEM(Soft Error Mitigation) Controller를 이용하면 configuration memory에서 발생하는 소프트 에러의 영향을 줄일 수 있다. SEM Controller는 FPGA의 configuration memory 영역에 추가된 ECC(Error Correction Code)와 CRC(Cyclic Redundancy Code) 기능을 이용하여 configuration memory에 발생한 소프트 에러를 감지하여 필요시 partial reconfiguration 과정을 수행하여 FPGA의 기능을 소프트 에러 발생 이전으로 복구한다. 본 논문에서는 Xilinx사의 7-Series FPGA에서 SEM Controller를 이용하여 configuration memory의 소프트 에러를 검출하고 정정할 때 FPGA의 신뢰도를 가용성(availability) 관점에서 분석한다. 이를 위해 SEM Controller의 소프트 에러 정정 성능에 따른 가용성 함수를 유도하고 그 효과를 검토한다. 연구 결과는 소프트 에러가 발생하는 환경에서 동작하는 SRAM 기반 FPGA의 신뢰성 예측에 사용할 수 있을 것으로 기대된다.

• 디지털융복합연구
• /
• 제11권6호
• /
• pp.137-142
• /
• 2013

음성 인식 시스템은 부정확한 음성 신호의 입력으로 특징을 추출하여 인식할 경우 오인식의 결과가 나타나거나 유사한 음소로 인식된다. 따라서 본 논문에서는 음소가 갖는 특징을 기반으로 음소 유사율과 신뢰도 측정을 이용한 음성 인식 오류 보정 방법을 제안하였다. 음소 유사율은 학습 모델의 음소에 MFCC와 LPC 특징 추출 방법을 이용하여 구하였으며 신뢰도로 측정하였다. 음소 유사율과 신뢰도를 측정하여 오인식되는 오류를 최소화하였으며 음성 인식 과정에서 오류로 판명된 음성에 대하여 오류 보정을 수행하였다. 본 논문에서 제안한 시스템을 적용한 결과 98.3%의 인식률과 95.5%의 오류 보정율을 나타내었다.

• 한국통신학회논문지
• /
• 제11권4호
• /
• pp.287-295
• /
• 1986

본 논문에서는 디지털 이동 무선통신을 위한 음성신호와 부호화 기법으로 SBC(sub-bnad coding)를 제안하고, SBC의 레일리(Rayleigh) 페이딩 채널에서의 음질의 강인성을 컴퓨터 시뮬레이션을 통해 조사하였다. 먼저 레일리 페이딩 채널, 시뮬레이터 및 16-ary DPSK(differential phase shift key) 수신기 모델을 제시한 후, 모델의 타당성을 이론치와 비교하여 입증하였다. 채널에러에 대한 영향은 SNR, LPC(linear predictive codin) 거리척도 및 주관적인 청각조사를 통해 검토하였다. BER(bit error rate) =$10_{-3}$, $10_{-2}$, 5$ imes$$10_{-2}$에 대한 시뮬레이션결과 BER=$10_{-2}$에서도 음성의 이해도는 확인되었으며, BER=5$ imes$$10_{-2}$에서도 음성통신에 사용하기는 충분하였다. 따라서 SBC는 ECC(error correction code) 사용없이 BER=$10_{-4}$~$10_{-2}$정도의 레일리 페이딩 채널에서 디지탈 이동무선통신에 응용이 가능함을 알 수 있었다.

• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.615-622
• /
• 2015

Recently Digital-TachoGraph(DTG) was mounted mandatorily in commercial vehicles(Taxi, Bus, etc.). DTG records accurate and detailed information of the running state of vehicles related to traffic accident, such as Time, Distance, Velocity, RPM, Brake ON/OFF, GPS, Azimuth, Acceleration. Thus those standardized data can play an important role in traffic accident investigation and reconstruction. To develope the accurate and objective method using the DTG data for the reconstruction of traffic accident, we had conducted several tests such as driving test, high speed circuit test, braking test, slalom test at Korea Automobile Testing & Research Institute(KATRI), and collision test at Korea Automobile insurance repair Research and Training center(KART) with the vehicle equipped with several DTG. Development of the program which enables the reading and analysis of the DTG data was followed. In the experiments, we have found velocity error, RPM error, brake signal error and azimuth error in several products, and also non-continuous event data. The cause of these errors was deduced to be related to the correction factor, the durability of electronic parts and the algorithm.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.221-227
• /
• 2012

We propose optical proximity corrections (OPCs) for digital micromirror device (DMD)-based maskless lithography. A pattern writing scheme is analyzed and a theoretical model for obtaining the dose distribution profile and resulting structure is derived. By using simulation based on this model we were able to reduce the edge placement error (EPE) between the design width and the critical dimension (CD) of a fabricated photoresist, which enables improvement of the CD. Moreover, by experiments carried out with the parameter derived from the writing scheme, we minimized the corner-rounding effect by controlling light transmission to the corners of a feature by modulating a DMD.

• 한국디지털건축인테리어학회논문집
• /
• 제12권1호
• /
• pp.61-70
• /
• 2012

A construction project is very costly and takes a long time to make investment and yield profit. For this reason, financial institutions are cautious about financing construction projects. Meanwhile, a construction company needs financing from financial institutions to cover a large expense of a construction project. Thus, there is likely to be a close correlation between financing conditions and business operation of a construction company. To examine the relationship, variables were identified that are related to insolvency of a construction company and changes in financing conditions. The analysis period is between the second quarter of 2001 and the fourth quarter of 2010. Data was retrieved from TS2000 established by Korea Listed Companies Association (KLCA), Statistics Office, and Construction Economy Research Institute of Korea (CERIK). In terms of methodology, VECM (Vector Error Correction Model) was used to analyze dynamic relationship between changes in financing conditions and insolvency of a construction company based on the identified variables. The hypothesis was that changes in financing conditions would significantly affect business of a construction company, but, the analysis did not find a close relation between the two factors. However, it was shown that poor business of a construction company affects financing conditions adversely.

• Current Optics and Photonics
• /
• 제6권2호
• /
• pp.161-170
• /
• 2022

Three-dimensional (3D) geometric models are introduced to correct vignetting, and a downhill simplex search is applied to determine the coefficients of a 3D model used in digital microscopy. Vignetting is nonuniform illuminance with a geometric regularity on a two-dimensional (2D) image plane, which allows the illuminance distribution to be estimated using 3D models. The 3D models are defined using generalized polynomials and arbitrary coefficients. Because the 3D models are nonlinear, their coefficients are determined using a simplex search. The cost function of the simplex search is defined to minimize the error between the 3D model and the reference image of a standard white board. The conventional and proposed methods for correcting the vignetting are used in experiments on four inspection systems based on machine vision and microscopy. The methods are investigated using various performance indices, including the coefficient of determination, the mean absolute error, and the uniformity after correction. The proposed method is intuitive and shows performance similar to the conventional approach, using a smaller number of coefficients.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.333-340
• /
• 2017

In this paper, we describe HW/SW co-optimizations for reconfigurable application specific instruction-set processors (ASIPs). Based on our previous very long instruction word (VLIW) ASIP, the proposed framework realizes various forward error-correction (FEC) algorithms for wireless communication systems. In order to enhance the energy efficiency, we newly introduce several design methodologies including high-radix algorithms, task-level out-of-order executions, and intensive resource allocations with loop-level rescheduling. The case study on the radix-4 turbo decoding shows that the proposed techniques improve the energy efficiency by 3.7 times compared to the previous architecture.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.129-133
• /
• 2000

It is reasonable to use the stereo vision and image processing technique to digitize 3D coordinates of grid points and to evaluate surface strains on a sheet metal parts. However this method has its intrinsic problems such as the difficulty in enhancement of bad images inevitable error due to digital image resolution of camera and frame grabber unreliability of strains and thickness evaluated from coarse grid on the corner area with large curvature and the limitation of the area that can be measured at a time. Therefore it is still hard to measure strain distribution over the entire surface of a medium,- or large-sized stamped part at a time even by using an automated strain measurement system. In this study the curvature correction algorithm based on the grid refinement and the geometry assembling algorithm based on the global error minimization (GEM) scheme are suggested. Several applications are presented to show the reliability and efficiency of these algorithms.

• 한국통신학회논문지
• /
• 제29권12C호
• /
• pp.1633-1641
• /
• 2004

위성 디지털 방송이나 위성 인터넷에서는 위성에서 단말에 이르는 고속 리턴 채널 환경이 매우 나빠 연집오류가 심하게 생긴다. 이 논문에서는 리턴 채별이 레일리 확률 채널일 때, 앞 오류 고침 (forward error correction: FEC) 부호화 방식의 성능을 분석한다. 먼저, Loo, Lutz, Vucetic, Corazza의 채별 모형을 고찰하고, Rayleigh 페이딩 채널에서 길쌈 부호, 리드 솔로몬 부호, 길쌈-리드 솔로몬 연접 부호 터보 부호의 성능을 비교 분석한다.