• Imaging Science in Dentistry
• /
• 제42권4호
• /
• pp.243-247
• /
• 2012

Purpose: This study was performed to compare the inverted digital images and film-based images of dry pig mandibles to measure the periodontal bone defect depth. Materials and Methods: Forty 2-wall bone defects were made in the proximal region of the premolar in the dry pig mandibles. The digital and conventional radiographs were taken using a Schick sensor and Kodak F-speed intraoral film. Image manipulation (inversion) was performed using Adobe Photoshop 7.0 software. Four trained examiners made all of the radiographic measurements in millimeters a total of three times from the cementoenamel junction to the most apical extension of the bone loss with both types of images: inverted digital and film. The measurements were also made in dry mandibles using a periodontal probe and digital caliper. The Student's t-test was used to compare the depth measurements obtained from the two types of images and direct visual measurement in the dry mandibles. A significance level of 0.05 for a 95% confidence interval was used for each comparison. Results: There was a significant difference between depth measurements in the inverted digital images and direct visual measurements (p>|t|=0.0039), with means of 6.29 mm ($IC_{95%}$:6.04-6.54) and 6.79 mm ($IC_{95%}$:6.45-7.11), respectively. There was a non-significant difference between the film-based radiographs and direct visual measurements (p>|t|=0.4950), with means of 6.64mm($IC_{95%}$:6.40-6.89) and 6.79mm($IC_{95%}$:6.45-7.11), respectively. Conclusion: The periodontal bone defect measurements in the inverted digital images were inferior to film-based radiographs, underestimating the amount of bone loss.

• 한국콘텐츠학회논문지
• /
• 제11권11호
• /
• pp.185-193
• /
• 2011

결핵은 환자를 미리 발견하여 치료함으로서, 질병의 전파를 차단하여 새로운 감염자가 발생을 최소화하고, 결핵을 조기에 예방 및 진단하는 것이 중요하다. 그러므로 현재 의학에서는 디지털 의료영상을 활용하여 질병진단의 보조 수단으로서 컴퓨터자동진단시스템이 응용되고 있다. 본 연구에서 주성분 분석(PCA)과 질감분석(Texture features)의 알고리즘을 이용하여 결핵의 질병을 자동으로 판별 및 인식하였으며, 그 기준에 따라 디지털 흉부 방사선영상에서 컴퓨터자동진단의 실용화를 위한 선행연구를 하였다. 실험결과는 주성분분석을 이용한 병변 인식률은 전문의의 질병에 대한 판독률보다 낮게 나타났지만, 질감분석의 인식률은 전문의 판독결과보다 높은 병변 인식률을 나타내었다. 그러므로 제안하는 알고리즘을 활용한 컴퓨터자동진단시스템은 임상의사에게 부가적인 보조 수단으로서 예비판독 단계의 정보를 제공하여 질병의 조기진단 및 예방이 가능할 것으로 사료된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.1033-1036
• /
• 1999

This paper proposes an efficient fault diagnosis for digital circuits using multilayer neural networks. The efficient learning algorithm is also proposed for the multilayer neural network, which is combined the steepest descent for high-speed optimization and the dynamic tunneling for global optimization. The fault-diagnosis system using the multilayer neural network of the proposed algorithm has been applied to the parity generator circuit. The simulation results shows that the proposed system is higher convergence speed and rate, in comparision with system using the backpropagation algorithm based on the gradient descent.

• 동의생리병리학회지
• /
• 제34권4호
• /
• pp.191-200
• /
• 2020

The purpose of this pilot study was to examine the effect of tongue color change due to food ingestion on tongue diagnosis by both Korean Medicine doctors and digital tongue diagnosis system. In order to obtain objective and quantitative data, we used digital camera to collect the data. Prior to our investigation, we conducted a brief survey of 26 Korean Medicine doctors and found out that tongue diagnosis is frequently used and food-stained tongue could be commonly observed in clinics. Depending on their color, viscosity, and amount of intake, various foods caused stains with different colors and thicknesses. Also, duration and amount of food stain on tongue were different from person to person. Since coffee-stained tongue was the most frequently observed one in clinics according to the survey, we used coffee to evaluate the effect of food-stained tongue on tongue diagnosis. Korean Medicine doctors tended to interpret coffee-stained tongue as having yellow tongue coat but their judgement on tongue body color did not differ in spite of the coffee stains. Meanwhile, tongue diagnosis system algorithm tended to judge coffee-stained tongue as having normal but yellowish tongue coat and reddish tongue body. Altogether, food color on tongue can influence tongue diagnosis outcomes. Further research is needed in order to develop more efficient tongue diagnosis algorithm and digital medical service system.

• 대한디지털의료영상학회논문지
• /
• 제16권2호
• /
• pp.25-29
• /
• 2014

The full-field digital mammography (FFDM), which has been known as a digital breast imaging system, carries out more outstanding performance than the screen-film mammography in overall image quality, skin & nipple, description of pectoral muscle and expression of micro-calcification. Thus, in this thesis, I perform experiments for both the enhancement of image quality and accurate estimation of the result in question, when detecting the very tiny-sized lesions in mammography. The image of digital breast X-rays is the important diagnostic tool for detecting early breast cancer and micro calcification lesion. The experiment of how much compression rate has an effect on the result of diagnosis in the case of microcalcification lesion, with JPEG2000 40:1 compression and over 50% enlargement led to obscure or definitely unacceptable diagnostic results is performed. And in another study of assessment of PSNR degree. I recognized the importance of standardized management system in mammography, where not to mention the accurate reading of the image has the most crucial role in diagnosis

• 대한전기학회논문지:전력기술부문A
• /
• 제49권10호
• /
• pp.516-523
• /
• 2000

In this paper, intelligent methods using digital protective relay in power supervisory control system is developed in order to protect power systems by means of timely fault detection and diagnosis during operation for induction motor which has various load environments and capacities in power systems. The spectrum pattern of input currents was used to monitor to state of induction motors, and by clustering the spectrum pattern of input currents, the newly occurrence of spectrums pattern caused by faults were detected. For diagnosis of the fault detected, the fuzzy fault tree was derived, and the fuzzy relation equation representing the relation between an induction motor fault and each fault type, was solved. The solution of the fuzzy relation equation shows the possibility of each fault's occurring. The results obtained are summarized as follows: 1) The test result on the basis of KEMC1120 and IEC60255, show that the operation time error of the digital motor protective relay is improved within ${\pm}5%$. 2) Using clustering algorithm by unsupervisory learning, an on-line fault detection method, not affected by the characteristics of loads and rates, was implemented, and the degree of dependency by experts during fault detection was reduced. 3) With the fuzzy fault tree, fault diagnosis process became systematic and expandable to the whole system, and the diagnosis for sub-systems can be made as an object-oriented module.

• Imaging Science in Dentistry
• /
• 제32권3호
• /
• pp.123-127
• /
• 2002

Purpose : To determine whether subtraction images utilizing contrast media can improve the diagnostic performance of proximal caries diagnosis compared to conventional periapical radiographic images. Materials and Methods: Thirty-six teeth with 57 proximal surfaces were radiographied using a size #2 RVG-ui sensor (Trophy Radiology, Marne-la-Vallee, France). The teeth immersed in water-soluble contrast media and subtraction images were taken. Each tooth was then sectioned for histologic examination. The digital radiographic images and subtraction images were examined and interpreted by three dentists for proximal caries. The results of the proximal caries diagnosis were then verified with the results of the histologic examination. Results: The proximal caries sensitivity using digital subtraction radiography was significantly higher than simply examining a single digital radiograph. The sensitivity of the proximal dentinal carious lesion when analyzed with the subtraction radiograph and the radiograph together was higher than with the subtraction radiograph or the radiograph alone. Conclusion: The use of subtraction radiography with contrast media may be useful for detecting proximal dentinal carious lesions.

• 한국콘텐츠학회논문지
• /
• 제14권11호
• /
• pp.362-369
• /
• 2014

본 연구는 골다공증 환자의 Digital 요추 측부 영상을 이용하여 질감특징의 통계적 분석으로 컴퓨터 보조진단 시스템 구현과 질병의 조기진단 및 치료를 위한 실험적인 모형 연구로 신뢰성 있는 보조적 진단 정보를 제공함으로써 골다공증에 대한 정확한 진단 방향을 제시하고자 하였다. 이를 위해서 정상인의 Digital 방사선 요추 측부 영상과 골다공증 환자의 Digital 방사선 요추 측부 영상을 실험 영상으로 하여 설정된 ROI에 대한 통계적 질감특징 값을 6가지 parameter로 나타냈다. 골다공증에 대한 질감특징분석 값 중 Average Gray Level에서 95%로 최고 높은 인식률을 나타내었고, Uniformity에서 80%로 가장 낮은 인식률을 나타내었다. 또한 Average Contrast에서 82.5%, Smoothness에서 90%, Skewness에서 87.5%, Entropy에서 87.5%를 나타내어 6가지 Parameter에서 모두 80%이상의 높은 인식률을 나타내 알고리즘의 안정성을 입증하였다. 따라서 본 연구 결과를 토대로 의료영상의 컴퓨터자동진단 시스템으로 발전된 프로그램을 coding 한다면 의료영상의 병소부위 자동검출, 질병 진단을 위한 예비 진단자료, 질병의 확진을 위한 자료제공, 제한된 장비로도 진단 가능, 의료영상의 판독시간 단축에 유용하게 사용될 수 있으리라 사료된다.

• 대한의용생체공학회:의공학회지
• /
• 제26권5호
• /
• pp.283-294
• /
• 2005

The Center for Imaging Human Structures (CIH) was established in December 2002 to develop new diagnostic imaging techniques and to make them available to the greater community of biomedical and clinical researchers at Sungkyunkwan University. CIH has been involved in 5 specific activities to provide solutions for early diagnosis and improved treatment of human diseases. The five area goals include: 1) development of a digital mammography system with computer aided diagnosis (CAD); 2) development of digital radiological imaging techniques; 3) development of unified medical solutions using 3D image fusion; 4) development of multi-purpose digital endoscopy; and, 5) evaluation of new imaging systems for clinical application

• 디지털산업정보학회논문지
• /
• 제5권4호
• /
• pp.127-137
• /
• 2009

This paper is proposed that in-output Digital module is acquired a vibration signal of a rotating machinery by Data Acquisition System. The module is designed to get ride of nose through low pass filter on the vibration signal from sensors and set the gain value for being able to sampling AC to DC, and also the sampled data by sampler and the conversed data by DIP/FPGA is supplied to the analyzer for analysis at a software tool. The DIP(Digital Signal Processor) of the Digital input/output Board makes Average voltage, Peak to Peak voltage, RMS(Root Mean Square) and Gap voltage, also FFT(Fast Fourier Transform) for rotating vibration diagnosis.