• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.4
• /
• pp.131-140
• /
• 2010

Recently, mobile wireless data traffic has been dramatically increased due to not only the popularization of digital convergence devices including smart phone, Net-book, and Tablet PC, but also the vitalization of wireless Internet related eco-systems such as AppStore. In addition, it is expected that a tremendous increase in mobile data is caused by the release of unlimited mobile data plans (flat-fee). In order to deal with such mobile data traffic explosion, it is necessary that network operators should make efforts to offload wireless data traffic. This paper reviews the condition of mobile wireless data traffic in domestic and international telecommunication industry and looks for various action plans to overcome the difficulty of network operators.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.50-56
• /
• 2009

This paper describes the design of image data transmitter for portable media device for Mobile Display Digital Interface standard. The transmitter uses connection lines to 6 to transmit QVGA image data. In this paper, the transmitter is using only 9 packets for image processing and a state-machine based design is adapted for packet processing. The design was verified using FPGA Xilinx virtex4-LX60. Data rate of the transmitter is 363Mbps with six connection lines. The transferring capability is 30 frame of 24bit RGB 500,000 pixel image data per second.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.6
• /
• pp.1495-1502
• /
• 2015

Dashboard camera is important system to store the variable data that not only video but also non-visual information that state of vehicle such as accelerometer, speed, direction. Non-visual information include variable data that can't visualization, so it used important evidence to figure out the situation in accident. It could be missed to non-visual information what can be prove the case in the just digital video forensic procedure. In this paper, We proposal the digital forensic analysis procedure for dashboard camera to all data in dashboard camera extract and analysis data for investigating traffic accident case. And I analyze to some products in with this digital forensic analysis procedure.

• The KIPS Transactions:PartC
• /
• v.17C no.5
• /
• pp.391-398
• /
• 2010

Most of digital forensics tools focus on file analysis of allocated area on storage. So, there is a lack of recovery methods for deleted files by suspects or previously used files. To efficiently analyze deleted files, digital forensic tools depend on data recovery tools. These process not appropriate for quick and efficient responses the incident or integrity preservation. This paper suggests the framework for data recovery and analysis tools from digital forensics point of view and presents implementation results.

• Journal of the Optical Society of Korea
• /
• v.17 no.6
• /
• pp.513-517
• /
• 2013

Recently, maskless lithography (ML) systems have become popular in digital manufacturing technologies. To achieve high-throughput manufacturing processes, digital micromirror devices (DMD) in ML systems must be driven to their operational limits, often in harsh conditions. We propose an instrument and algorithm to detect DMD malfunctions to ensure perfect mask image transfer to the photoresist in ML systems. DMD malfunctions are caused by either bad DMD pixels or data transfer errors. We detect bad DMD pixels with $20{\times}20$ pixel by white and black image tests. To analyze data transfer errors at high frame rates, we monitor changes in the frame rate of a target DMD pixel driven by the input data with a set frame rate of up to 28000 frames per second (fps). For our data transfer error detection method, we verified that there are no data transfer errors in the test by confirming the agreement between the input frame rate and the output frame rate within the measurement accuracy of 1 fps.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.411-417
• /
• 2006

As NGIS project has been implemented in 1995 and effectiveness of spatial information increased, Digital maps serve several purpose in administrative, living, and industrial fields. But, Digital maps have many differences with real world information and difficulties in application of managing urban facilities due to high update cost and long generation period. In this study, We suggest methodology to update a building layer of digital map in urban area as regenerating a building layer by detection of changed buildings in the existing digital map anf extraction using LIDAR data and Aerial images, more easier to acquire data and available to guarantee accuracy. Experimental results are expected to applied for constructing 3D urban model in a broad expensive urban area.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.382-385
• /
• 2003

Introduction of digital broadcasting service does not only mean the change of information transmission method but also the change of total broadcasting system. In past day, Television was only received one-sided information from broadcasting station, but digital broadcasting means that digital television becomes the most important means of information transmission by the introduction of new programming, lots of channels, data service, multi communication. In the age of the digital broadcasting, the recording and replay medium's interest is getting higher. The medium is able to record more than 24 hours' digital broadcasting programs without additional tapes. In this paper the recording and replay device using HDD was implemented and device driver based on linux was programmed. It has Intel PXA250 processor and hard disk is used as storage equipment. And transport Stream is saved on hard disk through PXA250's data bus. FIFO is added to solve the different saving speed and FPGA is also added to display the saved data.

• Korean Journal of Remote Sensing
• /
• v.24 no.5
• /
• pp.463-471
• /
• 2008

The quality of orthoimages mainly depends on the elevation information and exterior orientation (EO) parameters. Since LiDAR data directly provides the elevation information over the earth's surface including buildings and trees, the concept of true orthorectification has been rapidly developed and implemented. If a LiDAR-driven digital surface model (DSM) is used for orthorectification, the displacements caused by trees and buildings are effectively removed when compared with the conventional orthoimages processed with a digital elevation model (DEM). This study utilized LiDAR data to generate orthorectified digital aerial images. Experimental orthoimages were produced using digital terrain model (DTM) and DSM. For the preparation of orthorectification, EO components, one of the inputs for orthorectification, were adjusted with the ground control points (GCPs) collected from the LiDAR point data, and the ground points were extracted by a filtering method used in a previous research. The orthoimage generated by DSM corresponded more closely to non-ground LiDAR points than the orthoimage produced by DTM.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.485-492
• /
• 2020

Information on the energy consumption of buildings that can be obtained through conventional methods is limited. Therefore, this study aims to develop a model that can support decision making about building facility management through digital transformation technologies. Through the IoT sensor, the building's energy data and indoor air quality data are collected, and the monitored data is visualized through the ELK Stack and produced as a dashboard. In addition, the target building is photographed with a 360-degree camera and maps using a tool to create a 360-degree tour. Using such digital transformation technologies, users of buildings can obtain various information in real time without visiting buildings directly. This can lead to changes in actions or actions for building management, supporting facility management decisions, and consequently reducing building energy consumption.

• Spatial Information Research
• /
• v.10 no.3
• /
• pp.455-468
• /
• 2002

Toward the systematic and efficient management of national land, National Geography Institute(NGI, National mapping agency) has been producing national basemap in automated process since middle of 1980's. Under the National Geographic Information System(NGIS) Development Plan, NGI began to produce digital maps in the scales of 1:1,000, 1:5,000, 1:25,000 since 1995. However, those of digital maps that have been generated under NGIS Development Plan need to be modified and corrected due to lack of technology and experience in making digital maps. In this context, those digital maps generated are currently in great need for improving the data dictionary. It is fully appreciated in previous research that data dictionary will be a key element far users and generators of digital maps to rectify the existing problems in digital maps as well as to maximize the application of digital maps. In this paper, we analyzed existing problems in digital maps based on previous researches and interviews with engineers in different fields of geospatial engineering. And then, the existing data dictionary has been redefined and modified. In the line of modification process, a relational matrix was established fur each topographic feature defined in the existing feature classification system. This paper presents newly proposed data dictionary which conforms to newly defined feature classification system from previous research performed by NGI.