• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.567-570
• /
• 2005

Recently, as mobile paradigms such as telematics or LBS (Location Based Service) have been being more diverse and mobile devices such as PDA (Personal Digital Assistance) or several telematics terminals have been being used more widely, mobile services, for example, mobile geographic information service have been being put more importance by people. In this paper, we propose to adopt S/W and data streaming mechanism as a method to improve performance of mobile geographic information service which is a representative of mobile services based on client-server architecture. The show the effectiveness of proposed methods, we design and implement S/W streaming prototype system and sample mobile geographic information service to be executed on the S/W streaming system.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
• /
• pp.309-311
• /
• 2006

본 논문은 셋톱박스내의 디지털 비디오 레코더를 활용하여 디지털 텔레비전의 양방향성 구현하기 위한 해법을 다루고 있다. 지금까지는 디지털방송 중에 시청자가 요구하는 방대한 양의 다양한 인터랙티브 콘텐츠들을, 그것들이 데이터방송이건 HD급 방송이건 간에, 소화해 내기란 힘든 일이었으며, 더군다나 IPTV가 출현하기 전까지는 상상도 못할 일이었다. 비록 초고속 인터넷을 통한 IPTV가 양방향 서비스를 가능하도록 하고는 있지만, 셋톱박스를 통해서 한 번에 방대한 양의 콘텐츠를 수신하기란 그리 쉬운 일은 아니다. 이 논문에서 본인은 디지털방송에서 대용량의 인터랙티브 서비스를 제공받는데 장애가 되는 콘텐츠 다운로드 딜레마에 대한 효율적인 해법을 디지털 비디오 레코더가 장착된 셋톱박스를 통해 제시하고자 한다.

• 한국산업정보학회논문지
• /
• 제20권1호
• /
• pp.1-7
• /
• 2015

In this paper, a 12-bit high resolution, power and area efficiency hybrid digital pulse width modulator (DPWM) with process and temperature (PT) calibration has been proposed for digital controlled DC-DC converters. The hybrid structure of DPWM combines a 6-bit differential tapped delay line ring-mux digital-to-time converter (DTC) schema and a 6-bit counter-comparator DTC schema, resulting in a power and area saving solution. Furthermore, since the 6-bit differential delay line ring oscillator serves as the clock to the high 6-bit counter-comparator DTC, a high frequency clock is eliminated, and the power is significantly saved. In order to have a simple delay cell and flexible delay time controllability, a voltage controlled inverter is adopted to build the deferential delay cell, which allows fine-tuning of the delay time. The PT calibration circuit is composed of process and temperature monitors, two 2-bit flash ADCs and a lookup table. The monitor circuits sense the PT (Process and Temperature) variations, and the flash ADC converts the data into a digital code. The complete circuits design has been verified under different corners of CMOS 0.18um process technology node.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.393-398
• /
• 2006

Currently, 54 kinds of digital maps are provided by National Geographic Information Clearinghouse and the majority of those maps are based on aerial photographs or satellite image. The digital maps which symbolize and simplifies the topography and objects from ortho-photos does not reflect the objects 'shapes and facilities' changes. Especially, underground structures and complex building shapes are not correctly identifies by ortho-photos. Furthermore, the 1/1,000 and 1/500-1/2,500 maps for urban area produced by some local government or public organizations have detailed information with high precision, it is not easy to update the information due to the frequent changes of structures in the city. Although some efforts to solve this problem such as conducting field survey and shorten the survey period were tried, it is not the fundamental solution due to the high cost. Therefore, in this study, a realtime renewal and update of digital map using general survey are suggested. By assigning absolute coordinates to the general survey products and matching with digital maps, it is possible to update the digital map economically and rapidly. In addition, it is suggested that the construction of DB for general survey and sharing among survey companies to solve the duplicated survey.

• 통상정보연구
• /
• 제7권3호
• /
• pp.3-25
• /
• 2005

It is high time to prepare the online publication system of academic research paper. Online publications like digital research paper, e-Book, etc. are increased day by day as the information technology(IT) is developing continually. But, the legal aspect of publication system of academic research paper in Korea is not prepared yet. The purposes of this study are to examine the problems on the publication system of academic research paper in the context of digital goods and to frame a policy of legal proceedings in relation to the social science. The methodology used in this paper is theoretical analysis which is examining the case of academic research system and scientific journal in Korea. As a result of this study, following measures are suggested: (1) Legal provisions on the online publication system, that is, "Research Promotion Law of Korea" controlled by KRF(Korea Research Foundation) and MOE(Ministry of Education) should be revised. (2) Solution like software program and DB system proceeding the data on academic research paper should be prepared newly. (3) From the viewpoint of digital goods, both protecting the intellectual property right and settling the reliance upon online publication system should also be considered simultaneously.

• Corrosion Science and Technology
• /
• 제12권1호
• /
• pp.1-6
• /
• 2013

Recently Digital TV industry has drastically been moving the illuminating system, which causes an obvious product change from PDP and LCD to LED model to provide high-definition image. Due to strong competition in the digital industry, TV manufacturers make a great efforts to reduce production cost by using low-priced materials such as steels instead of aluminum and plastic etc. In this paper we have developed a new low-priced electrogalvanized steel sheet, which has a black resin composite layer, to substitute conventional high-priced PCM steel and plastic mold for rear cover panel in the digital TV. The black resin composite was prepared by mechanical dispersion of the mixture solution that consists of high solid polyester resin, melamine hardener, black pigment, micronized silica paste, polyacrylate texturing particle and miscellaneous additives. The composite solution was coated on the steel sheet using roll coater followed by induction furnace curing and cooling. Although the coated layer has a half thickness compared to the conventional PCM steels having $23{\mu}m$ thickness, it exhibits excellent quality for the usage of rear cover panel. The new steel sheet was applied to test products to get quality certification from worldwide electronic appliance customers. Detailed discussion provides in this paper including preparation of composite solution, roll coating technology, induction curing technology and quality evaluation from customers.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.452-452
• /
• 2013

ZnO is one of the most attractive transparent conductive oxide (TCO) films because of low toxicity, a wide band gap material and relatively low cost. However, the electrical conductivity of un-doped ZnO is too high to use it as TCO films in practical application. To improve electrical properties of undoped ZnO, transition metal (TM) doped ZnO films such as Al doped ZnO or Ti doped ZnO have been extensively studied. Here, we prepared Ti doped ZnO thin films by atomic layer deposition (ALD) for the application of TCO films. ALD was used to prepare Ti-doped ZnO thin films due to its inherent merits such as large area uniformity, precise composition control in multicomponent thin films, and digital thickness controllability. Also, we demonstrated that ALD method can be utilized for fabricating highly ordered freestanding nanostructures of Ti-doped ZnO thin films by combining with BCP templates, which can potentially used in the photovoltaic applications.

• 한국중재학회지:중재연구
• /
• 제27권2호
• /
• pp.59-81
• /
• 2017

The purpose of this study is to find a solution to disputes in the process of producing digital music sources. At present, the center of the world music market including the domestic market has been completely transformed from the tangible musical record market to the intangible sound source market. Due to these environmental changes, the music production process becomes industrialized and specialized, causing conflicts of interest among the individuals in the process. First of all, this study examined changes in the music market which is the background of the dispute, identified the problems of the process and suggested solutions while summarizing the meaning and role of each process of producing a sound source that may arise during the sound production process. This study covers plagiarism between producers, copyright infringement of the creator against assistant creator caused by the industrialization and division of the production environment, issues related to the rights of sound engineers whose role and importance become bigger as acoustic technology develops and music genres become more diverse, and vertical hierarchy due to the formation of oligopoly by several distributors with huge capital. As a result of the study, it was concluded that Alternative Dispute Resolution (ADR) system is suitable for solving these problems. Specific methods of using ADR include activation of the dispute settlement system of the Korea Copyright Commission, active use of the arbitration clause specified in the standard contract, and recalculation of labor costs and earnings from copyright through mutual negotiations. This paper can be differentiated from previous studies in that it studied overall problems that might arise in the process of digital music source production and suggested ADR utilization as the solution.

• 디지털융복합연구
• /
• 제16권6호
• /
• pp.197-204
• /
• 2018

3D 컴퓨터그래픽에서 유체를 이용한 사실적인 시각효과(Visual Effects)는 영상의 질적 완성도를 높이는데 중요한 요소로 작용한다. 유체의 각 속성을 제어하여 물, 불, 폭발 등의 사실적인 움직임을 생성시키는 과정을 유체 시뮬레이션(Fluid Simulation)이라 한다. 일반적으로 유체 시뮬레이션의 제작은 주 시뮬레이션(Main simulation) 작업단계에 집중되지만, 이를 위한 사전준비 단계(Initial set up)인 초기 방출자에 대한 효과적인 생성방법이 중요하다. 이에 본 연구의 목적은 유체의 초기 방출 운동과 형태에 관여하는 요소들을 분석하고 이를 초기 제작공정에 적용할 수 있는 효과적인 방법을 제시하고자 한다. 이를 위한 연구의 전개는 첫째, 기존 관련 연구에 대해 분석 및 문제점을 제기하고, 둘째, 보다 효과적인 유체효과 시뮬레이션 진행을 위해, Dynamic Fluid Emitter Creation과 User Design Type Emission Velocity Solution에 대한 두가지 실험을 진행한다. 본 연구를 통해, 사용자 설계형의 방출 제어 솔루션을 통해 효율적인 초기단계의 유체 시뮬레이션 제작방법을 제시한다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권4호
• /
• pp.233-239
• /
• 2003

For the quantitative analysis of an unknown sample a calibration curve should be obtained, as analytical instruments give relative, rather than absolute measurements. Therefore, researchers should make standard samples with various known concentrations, measure each standard and the unknown sample, and then determine the concentration of the unknown by comparing the measured value to those of the standards. These procedures are tedious and time-consuming. Therefore, we developed a polymer based microfluidic device from polydimethylsiloxane, which integrates serial dilution and capillary electrophoresis functions in a single device. The integrated microchip can provide a one-step analytical tool, and thus replace the complex experimental procedures. Two plastic syringes, one containing a buffer solution and the other a standard solution, were connected to two inlet holes on a microchip, and pushed by a hydrodynamic force. The standard sample is serially diluted to various concentrations through the microfluidic networks. The diluted samples are sequentially introduced through microchannels by electro-osmotic force, and their laser-induced fluorescence signals measured by capillary electrophoresis. We demonstrate the integrated microchip performance by measuring the fluorescence signals of fluorescein at various concentrations. The calibration curve obtained from the electropherograms showed the expected linearity.