• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.5
• /
• pp.319-325
• /
• 2011

Recently, collision avoidance systems are under development to reduce the traffic accidents and driver comfort for automotive radar. Pulse radar can detect their range and velocities of moving vehicles using range gate and FFT(Fast Fourier Transform) of the doppler frequency. We designed the real time DSP(Digital Signal Processing) based automotive UWB(Ultra Wideband) radar, and implemented DSP to detect the range and velocity within 100ms for real time system of the automotive UWB radar. We also measured the range and velocity of a moving vehicle using designed automotive UWB radar in a real road environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.50-57
• /
• 1997

In order to make unmanned machining systems with satisfactory performances, it is necessary to incorporate appropriate condition monitoring systems in the machining workstations to provide the required intelligence of the expert. This paper deals with condition monitoring for chatter, tool wear and breakage during turning operation. To develop economic sensing and identiffication methods for turning processes, sound pressure measurement and digital signal processing technique were proposed. We suppressed chatter by stability control methodology, which was studied through manipulation of spindle speeds regarding to chatter frequencies. It was shown that tool wear and fracture were identified and to be estimated by using the wear indices. The validity of the proposed system was confirmed through the large number of cutting tests.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2009

OFDM is used for achieving a high-speed data transmission in mobile wireless communication systems. Conventionally, fast Fourier transform that is the main signal processing of OFDM is implemented using digital signal processing. The DSP FFT LSI requires large power consumption. Current-mode FFT LSI with analog signal processing is one of the best solutions for high speed and low power consumption. However, for the operation of current-mode FFT LSI that has the structure of parallel-input and parallel-output, current-mode serial-to-parallel and parallel-to-serial converter are indispensable. We propose a novel current-mode SPC and PSC and full chip simulation results agree with experimental data. The proposed current-mode SPC and PSC promise the wide application of the current-mode analog signal processing in the field of low power wireless communication LSI.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.521-537
• /
• 2000

Ultrasonic imaging is the most widely used modality among modern imaging device for medical diagnosis and the system performance has been improved dramatically since early 90's due to the rapid advances in DSP performance and VLSI technology that made it possible to employ more sophisticated algorithms. This paper describes "main stream" digital signal processing functions along with the associated implementation considerations in modern medical ultrasound imaging systems. Topics covered include signal processing methods for resolution improvement, ultrasound imaging system architectures, roles and necessity of the applications of DSP and VLSI technology in the development of the medical ultrasound imaging systems, and array signal processing techniques for ultrasound focusing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.743-749
• /
• 2007

Today, we can use radio communication device anywhere-anytime. Sometimes, we use the device in acoustic noise environment. The acoustic noise makes many problems in communication system. In acoustic noise environment, speaker cannot send clear information to receiver, because the received signal includes both speech signal and noise signal. A digital filter is useful to remove noise to get desired signal. One of methods is the adaptive digital filter using the adaptive noise canceller that automatically adjust filter parameters. This thesis addresses articulation algorithms against actual acoustic noises by means of two adaptive filtering methods. One is the adaptive noise canceller with two input channels and another is the spectral subtraction filter with one input channel. The experimental result from the proposed filter shows that the adaptive noise canceller is useful to reduce the non-stationary noises, while the spectral amplitude filter is effective for stationary noises.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.2
• /
• pp.80-88
• /
• 1997

In this paper, the implementation of audio/data processor using ETRI DSP to support analog mode in digital/analog dual mode mobile phone is presented. Audio/data processor performs the wideband data processing, audio signal processing, demodulation function, and data rate conversion when it is operated in analog mode. These functions are programmed in assembly language, and then loaded to ETRI DSP together with vocoder program for the digital mode operation. This is a very efficient implementation of the dual mode cellular phone ASIC since the vocoder for the digital mode and audio/data processor for the analog mode are programmed together in the same hardware.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.339-342
• /
• 2005

In order to support ultrawide-band signal generation for low rate WPAN, several types of signal generation mechanisms are suggested such as Chaos, Impluse, and Chirp signals by the activity of IEEE 802.15.4a. The communication system applied chaos theory may have ultrawide-band characteristics with spread spectrum and immunity from multipath effect. In order to use the advantage of chaotic signal generation, we introduce the system implementation of communication and networking systems with the chaos UWB signal. This system may be composed of mainly three parts in hardware architecture : RF transmission with chaotic signal generation, signal receiver using amplifiers and filters, and 8051 & FPGA unit. The most difficult part is to implement the chaotic signal generator and build transceiver with it. The implementation of the system is devidced into two parts i.e. RF blocks and digital blocks with amplifiers, filters, ADC, 8051 processor, and FPGA. In this paper, we introduce the system block diagram for chaotic communications. Mainly the RF block is important for the system to have good performance based on the chaotic signal generator. And the main control board functions for controlling RF blocks, processing Tx and Rx data, and networking in MAC layer.

• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.39-47
• /
• 1997

This paper presents a single board digital signal processing system which can perform two-dimensional (2-D) digital infinite impulse response (IIR) filtering in realtime. We have developed an architecture to provide not only the necessary computational power but also a balance of the system input/output and computational requirements. The architecture achieves large system throughput by using highly parallel processing at both the system and processor levels. It reduces system data communication requirements significantly by taking advantage of a custom-designed processor and by providing each processor with its own input and ouput channel. After system initialization, almost 100 percent of the time is used for data processing. Data transfers occur concurrently with data processing. The functional level simulation reveals that the system throughput can reach as high as one pixel per system cycle. With only 10MHz clock frequency system, it can implement up to fourth order 2-D IIR filters for video-rate data ($512\times512$ pixels per frame at 30 frames per second). If we increase the system frequency, the system can be used for the preprocessing and postprocessing of video signal of HDTV.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.46-53
• /
• 2008

This paper presents a 13.56 MHz RFID reader that can be used as a door-lock system for smart home security. The RFID reader consists of a transmitter, a receiver, and a data processing block. To verify the operation of the developed RFID reader, we present both a PSPICE simulation for transmitter/receiver and a digital simulation for data processing block. In particular, a CRC block for error detection of received data and a Manchester decoding block for position detection of collided data are designed using VHDL. In addition, we applied a binary search algorithm for multi-tag anti-collision. The anti-collision procedure is carried out by PIC microcontroller on software. The experimental results show that the developed reader can provide the right multi-tag recognition.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.918-924
• /
• 2009

This paper deals with the experimental assessment of the vibration suppression of the smart structures. First, we have presented the paper about the new high-speed active control system that we have developed using the DSP320C6713 microprocessor and a peripheral system composed of a data acquisition system, A/D and D/A converters, piezoelectric (PZT) actuator/sensors, and drivers using PA95. Since fast data processing is very important in the active vibration control of the structures, we utilized the fast processing DSP320C6713 microprocessor as a main processor to the controller and fast peripheral devices for fast control loop. To realize a fast active vibration control, we have analyzed and tested the processing time of the peripheral devices and provided the corresponding test results. Especially, we have focused on achieving the fast signal amplification of the PA95 device since it takes most of loop times of the control system. Finally, we performed numerous experiments of active vibration control of the aluminum plate to validate the superior performance of the developed control system based on previous mode tests of the plate.