• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.190-197
• /
• 2002

The goal of this paper is to propose a virtual instrumentation system based on three dimensional current coordinates for monitoring power quality. A developed system with various experimental graphic screens and numerical results is made up 586-PC and DSP(digital signal processor) board, power quality analyzing and evaluating software for windows. Power parameters are analyzed using correlation signal processing techniques based on the correlation between voltage and current waveforms. Analysis results are visualized by 3-D current coordinates, and it is compared and evaluated with conventional time/frequency domain. To verify the validity of the proposed system, power and harmonic parameters of single phase induction motor drive system is analyzed and verified.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.6
• /
• pp.49-57
• /
• 1993

In the paper, we describe the design of a pipelined datapath synthesis system for DSP applications. Taking SFG (Signal Flow Graph) in schematic as inputs, the system generates pipelined datapaths automatically through scheduling and module allocation processes. For efficient hardware synthesis, scheduling and module allocation algorithms are proposed. The proposed scheduling algorithm is of iterative/constructive nature, where the measure of equi-distribution of operations to partitions is adopted as the objective function. Module allocation is performed to reduce the interconnection cost from the initial allocation. In the experiment, we compare the results with those of other systems and show the effectiveness of the proposed algorithms.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.253-258
• /
• 2021

In this paper, we developed a hardware and software platform of the real-time data logging system to verify radar FEM (Front-end Module) and signal-processing algorithms. We developed a hardware platform based on FPGA (Field Programmable Gate Array) and DSP (Digital Signal Processor) and implemented firmware software to verify the various FEMs. Moreover, we designed PC based software platform to control radar logging parameters and save radar data. The developed platform was verified using 24 GHz multiple channel FMCW (Frequency Modulated Continuous Wave) in an environment of stationary and moving targets of chamber room.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.54-61
• /
• 2008

This paper presents a new TIQ based CMOS flash 6-bit ADC to process digital signal in real time. In order to improve the conversion speed of ADC by designing new logic or layout of ADC circuits, a new design method is proposed in encoding logic circuits. The proposed encoding circuits convert analog input into digitally encoded double base number system(DBNS), which uses two bases unlike the normal binary representation scheme. The DBNS adopts binary and ternary radix to enhance digital arithmetic processing capability. In the DBNS, the addition and multiplication can be processed with just shift operations only. Finding near canonical representation is the most important work in general DBNS. But the main disadvantage of DBNS representation in ADC is the fan-in problem. Thus, an equal distribution algorithm is developed to solve the fan-in problem after assignment the prime numbers first. The conversion speed of simulation result was 1.6 GSPS, at 1.8V power with the Magna $0.18{\mu}m$ CMOS process, and the maximum power consumption was 38.71mW.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.19-24
• /
• 2017

Nowadays, based on the advancement of IT techniques, innovative products combining IT techniques to PA system are developing. In this paper, we presented the hybrid mixer controller for digital PA system. We develop the integrated mixer controller which includes the digital mixer composing an existing digital PA system and function of digital integrated controller. Developed integrated mixer controller consists of multichannel mixer function with 16 audio input channels, 8 output channels. And, it has an equalizer for processing digital audio signal, matrix and limiter. Also, the developed controller has some features such as internet connection for controlling of overall PA system and remote monitoring of mixer process condition.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.219-222
• /
• 1991

It is difficult to adapt modern control theory to power conversion system for the price of real time control H/W and the difficulty of S/W implementation. But recent development of large integrated circuit make it possible that One-Chip microprocessor processes high speed arithmatic calculation used in control theory. Specially this chip is called Digital Signal Processing chip. So, this research developes high performance, high reliable digital control system using TMS320C30 of Texas Instrument for real time control in power conversion system.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.157-159
• /
• 2014

In this paper, we introduce SlimSRP, an ultra-low-power digital signal processor (DSP) solution for mobile audio and voice applications. So far, application processors (APs) have taken charge of all the tasks in mobile devices. However, they have suffered from short battery life problems to deal with complex usage scenarios, such as always-on voice trigger with continuous audio playback. From extensive analysis of audio and voice application characteristics, SlimSRP is designed to relive the performance and power burden of APs. It employs three-issue VLIW architecture, and the major low-power and high-performance techniques include: (1) an optimized register-file architecture friendly for constants generation, (2) a powerful instruction set to reduce the number of register file accesses and (3) a unique instruction compression scheme that contributes to saved memory size and reduced cache miss. An implementation of SlimSRP runs at up to 200MHz and the logic occupies 95K NAND2 gates in Samsung 28LPP process. The experimental results demonstrate that a MP3 decoder application with a 128kbps 44.1kHz input can run at 5.1MHz and the logic consumes only 22uW/MHz.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.4
• /
• pp.156-163
• /
• 1996

In this paper, we described the implementation and the sound quality assessment of a real-time stereo audio codec using TMS320C40 DSP (digital signal processing) chip for low bitrte and high quality audio. We implemented hardware and software in order to overcome a real-time processing problem of audio compression algorithm that can be produced by largely recursive computing and complexity of the process. We have studied five types of distortion that can be produced by perceptual coding and the codec was evaluated by eight test musics that are selected in SQAM (sound quality assessment material) 422-2-4-2 produced by EBU (european broadcast union). The subjective listening tests were carried out on the codec quality and preformance by double blind method in a listening room with eleven listeners. As a result, 5 grade-impairment scale was scored under minus one and the codec quality was evaluated to be perceptible, but not annoying.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.1477-1480
• /
• 2003

본 논문에서는 실시간 데이터 및 보안데이터, 영상데이터 통을 전송할 때 잡음으로 인해 발생되는 데이터 오류를 효과적으로 복원하기 위해 오류 정정 능력이 뛰어난 터보코드를 적응하여 신뢰성 있는 영상전송 시스템을 실현하였다. 영상처리 시스템에서는 CCTV, 비디오 카메라 등에서 나오는 NTSC(National Television System Committee) 영상 신호를 비디오 디코더를 통해 A/D 변환하여 출력하였다. 변환된 디지털 영상정보는 두 개의 영상필드로 출력되며 그중 하나의 필드가 선택되는 알고리즘을 EPLD(Erasable Programmable Logic Device) 로직회로로 구성하여 디지털 영상 데이터를 절반으로 줄이는 시스템을 구현하였다. 터보코드의 부호기, 복호기 시스템에서는 실수연산이 가능한 DSP(Digital Signal Processor)를 사용하여 터보코드를 구현하였으며, 터보코드의 성능을 좌우하는 인터리버부분은 블록 인터리버를 적용하여 설계하였다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.5
• /
• pp.122-128
• /
• 2007

The electric part of thermal SEM(Scanning Electron Microscopy) consists of high voltage generation, lens control, and image processing. Several methodologies for enhancing SEM image are addressed and those results are verified through analyses and experiments. The controller employes a DSP(Digital Signal Processing), making the system more flexible and convenient than the classical analogue based controller. In some parts based the analog circuit, there are inevitable sources of noise and image distortion. The experimental investigation is provided along with analytical proof to enhance the SEM image.