• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.381-388
• /
• 2015

In this paper, a wireless video streaming system is designed and implemented for TV white space applications. It consists of a RF transceiver module, a digital modem, a camera, and a LCD screen. A VGA resolution video is captured by a camera, modulated by modem, and transmitted by RF transceiver module, and finally displayed at a destination 2.6-inch LCD screen. The RF transceiver is based on direct-conversion architecture. Image leakage is improved by low pass filtering LO, which successfully covers the TVWS. Also, DC offset problem is solved by current steering techniques which control common mode level at DAC output node. The output power of the transmitter and the minimum sensitivity of the receiver is +10 dBm and -82 dBm, respectively. The channel bandwidth is tunable among 6, 7 and 8 MHz according to regulations and standards. Digital modem is realized in Kintex-7 FPGA. Data rate is 9 Mbps based on QPSK and 512ch OFDM. A VGA video is successfully streamed through the air by using the developed TV white-space RF communication module.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.578-586
• /
• 2005

Recently, due to the launch of digital broadcasting service, the demand of Flat Panel Display (FPD) is sharply rising. Among them, the PDP is expected to be one of the most promising digital displays of next generation because of its large screen size, high resolution, thinness and board field of view. Meanwhile, the PDP uses ADS (Address Display-period Separation) scheme which divide one subfield into address and sustaining period to express the grey scale of images. Since the output of sustaining power module Is mostly used for sustaining period, the load of the sustaining power module can be considered as a pulsating load. Due to this particular load condition, if the wide ZVS range of the power switches is not guaranteed, the hard switching causes large amount of switching loss and serious thermal problem in power module. In this paper, a high efficiency power conversion circuit for 60' PDP sustaining power module which achieves wide ZVS range with the help of additional ZVS tank is proposed. According to the various gating methods, the different operations of the proposed converter are presented. And, to confirm the properties of the proposed converter, an experimental prototype of 900W power converter is constructed md tested. As a result, more than $92\%$ of high efficiency is obtained at $10\%$ load condition, and the ZVS operation is achieved from full load to $10\%$ load condition.

• Journal of Digital Convergence
• /
• v.20 no.1
• /
• pp.191-202
• /
• 2022

The purpose of this study is to examine the effect of a 10-week body stability exercise program, which was conducted on 24 male football players. The result of the Visual Response Speed Test using BlazePod, showed a significant increase of the upper arms, left foot and right foot for 15 second in number of reactions and reaction time (p<0.001). As a result of evaluating whether or not 7 functional movements were improved in order to evaluate the functional movement screen, Hurdle Step (p=0.001) and Active Straight Leg Rise (p=0.022) movements were significantly improved. significantly improved. As a result of measuring the y-balance Test in order to evaluate the balance ability, composite score(p<0.001) of both sides was significantly improved. The result of evaluating vital capacity, which was conducted to evaluate mobility and muscle endurance, showed a significant improvement in Forced vital capacity(p<0.001) and Forced expiratory volume in 1.0(p=0.003). In conclusion, a 10-week BSE program intervention in high school period, which can most improve the technical fitness necessary for the game in power, agility, leg strength, leg stability, mobility, and muscle endurance, will improve overall technical fitness, prevent football players from being injured and enhance their performance.

• Journal of KIISE:Databases
• /
• v.35 no.3
• /
• pp.286-295
• /
• 2008

Multimedia consumer electronics(CE) devices, such as MP3 players, PMPs, and digital cameras, are electronic equipments used to record, play or create multimedia data. Most multimedia CE devices provide uses with the ability to search multimedia stored in the device and browse the search results. One of the unique requirements in multimedia CE devices is that the search results displayed in the screen must be restored quickly when the device powers off and later back on. For this purpose, the existing methods (1) re-execute the original search query, and (2) move the cursor to the original position in the search results. However, this approach may be inefficient when the number of records in the result set is large. In this paper, we propose an efficient method for multimedia CE devices that can quickly restore the search results displayed in the screen when the device powers off and later back on. The proposed method can retrieve the original search results in the screen quickly by saving and loading some information about the query evaluation plan. Though the performance evaluation, we show that the proposed method provides excellent performance regardless of the number of records in tile result set or the original cursor position.

• Korean Journal of Digital Imaging in Medicine
• /
• v.5 no.1
• /
• pp.64-77
• /
• 2002

DR has had an important fact not only in the department of radiology but also in productivity or work efficiency of a whole hospital. The environment of DR has more various parameter than CR, so it is able to supply high quality of medical services. The current environment of radiology department in each hospital has been changed from Film-Screen system to DR through Full-PACS. This hospital which uses Full-PACS became to study the proper condition of CR and DDR and how the image quality of them is expressed among general photographing systems in the DR environment. From this experiment, the image quality of DDR is better than CR under the same exposure condition. And in the DDR system, the score of image which uses AEC is a little higher than the score which doesn't use it. Especially it can be known that the function of AEC of DDR is useful to improve the image quality in the part of skull and chest. (The function of AEC : It is the tool that detects the ionized current of x-ray which goes through objects with using the ion chamber which is in the detector. Also it controls the examination of X-ray when the proper density is reached.) Because the proper degree of density can be represented by this system, the photographing can be taken much easily without consideration of the exposure condition with the thickness of various objects. From the result of this experiment, it can be known that the selection of proper exposure condition plays an important rule to gain good Image Quality. More researches will be necessary about DDR system which has potential ability in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.525-529
• /
• 2015

Depending on the field of smart industry has become increasingly widespread, the digital signage industry as advertising and content industry is emerging. However, this industry is growing rapidly it is not the reason for that is lack of a legal definition or system. The current legal system merely existing laws that apply to the use of outdoor advertising such as advertising and outdoor advertising Electrical, according to a separate law on digital signage is still is not enough. Most of the current legal system between a size that it is put in the control object, its type, the installation location and details and locations of areas in accordance with the regulation member of the law which can reduce the effectiveness of such a business to control them collectively There is concern that the differences are caused by unification can be difficult. In reality, the institutions of the new law was necessary, organized under the existing regulation rather than promoting new laws to screen the effectiveness of the national business media industry through a kind of standardization and unification of the digital signage industry in the future creation of a jurisdiction other than safety administration Science It is important to foster.

• 한국해양학회지
• /
• v.22 no.3
• /
• pp.143-152
• /
• 1987

The digital data were obtained using Kennedy 9000 magnetic tape deck which was connected to the SMS960 side scan sonar during the field operations. The data of three consecutive survey tracks near Seongsan-po, Cheju were used for the development of this study. The softwares were mainly written in Fortran-77 using VAX 11/780 MINI-COMPUTER (CPU Memory; 4MB). The established mapping system consists of the pretreatment and the digital processing of seafloor image data. The pretreatment was necessary because the raw digital data format of the field magnetic tapes was not compatible to the VAX system. Therefore the raw data were read by the personal computer using the Assembler language and the data format was converted to IBM compatible, and next data were communicated to the VAX system. The digital processing includes geometrical correction for slant range, statistical analysis and cartography of the seafloor image. The sound speed in the water column was assumed 1,500 m/sec for the slant range correction and the moving average method was used for the signal trace smoothing. Histograms and cumulative curves were established for the statistical analysis, that was purposed to classify the backscattering strength from the sea-bottom. The seafloor image was displayed on the color screen of the TEKTRONIX 4113B terminal. According to the brief interpretation of the result image map, rocky and sedimentary bottoms were very well discriminated. Also it was shown that the backscattered acoustic pressurecorrelateswith the grain size and sorting of surface sediments.

• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.337-350
• /
• 2017

As interactive digital signages with computer network have been increasingly popular in public space, the needs for studying content types and interactions suitable for the digital signages are emerging. In this study, we aim to find out what contents are preferred to share and how to interact in the digital signage installed in Seoul subway stations. We conduct a case study, a survey, and an in-depth interview. In the case study, we collect content types which have been communicated in public space. Among these content types, we conduct a survey to find out the preferred contents of Seoul citizens. We observe that the preferred contents differ by the age of the citizens. Specifically, 20's prefer the subjects about personal interests, 40's choose public interests and 30's prefer both types. In addition, we observe that the subjects about personal interest are relatively less preferred when people read, whereas the subjects are preferred when people write. Lastly, regarding interaction type, we find that Seoul citizens prefer touching the screen directly to using smart phone to express their empathy. The contents that people write and the number of likes will be archived as big data and analyzed so that Seoul city officers and citizens will know what people think based on age, location, and subjects.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.3 no.3
• /
• pp.31-44
• /
• 2000

The purpose of this study is to show how could GIS along with digital maps and census data be used for scientific urban analysis and location analysis for a proposed project. Results are summarized as follows. First. after digital maps being completed, the census tract system being adopted, and major urban data being inputted in the computer file, GIS could be used intensively for various reliable urban analysis. With graphic statistical, and overlay functions of GIS, various physical and socio-economic characteristics of urban areas could be presented for analysis in the form of thematic and datapoint maps on the computer screen. Second, the locational analysis for a proposed project is a major part in the building permit review process, which tends to become disputable and time consuming as society become pluralized. Along with various GIS functions scientific decision-making methods could be developed, and the methods could play an important role for faster and scientific location analysis. As such, GIS would play an important role for faster and reliable urban analysis and location analysis and these functions finally would play important roles to improve public services and administration of local governments.

• Clean Technology
• /
• v.7 no.3
• /
• pp.169-178
• /
• 2001

Textile printing prints around twenty bilion linear meters of textile each year. Rotary and flat bed screen printing requires pre and post treatments, leading to the loss of dyes and the environmental problems due to effluents. Digital ink jet printing can offer a solution to the existing problems, especially the environmental problems, in addition to its flexibility. Pigments are used as a dispersion inks in the digital inkjet textile printing. Molecular dynamic simulation like Stokesian dynamic simulation was employed to simulate the behavior of pigments and velocity distribution under the pressure driven flow in the printer nozzle. The simulation shows that the particle distribution in the flow are uniform if particle volume fraction is low, the ratio of nozzle and particle diameter is large, and the dimensionless average suspension velocity is low.