• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1464-1474
• /
• 1994

GPS(Global Positioning System)is a satellite-based navigation system that we can survey where we are, anywhere and anytime. In this paper, delay-lock loop of the receiver which detects the navigation data is theoretically analyzed, and designed using the digital logic circuit. Also logic operations for the synchronization are analyzed. The designed system consists of the correlator which correlates the received C/A code and the generated C/A code in the receiver, the C/A code generator which generates C/A code of selected satellite, and the direct digital clock syntheizer which generates the clock of the C/A code generator to control the C/A code phase and clock rate. From the analyses results of the proposed digital delay-lock loop system, the system has the detection propertied over 90% when its input signal power is above-113.98dB. The influence of input signal variation of digital delay loop, which is the input of A/D converter, is investigated and the performance is analyzed with the variation of threshold level via the computer simulation. The logic simulation results show that the designed system detects precisely the GPS navigation data.

• Journal of the Optical Society of Korea
• /
• v.16 no.1
• /
• pp.1-5
• /
• 2012

This paper describes a 150-Mb/s monolithic optical receiver for plastic optical fiber link using a standard CMOS technology. The receiver integrates a photodiode using an N-well/P-substrate junction, a pre amplifier, a post amplifier, and an output driver. The size, PN-junction type, and the number of metal fingers of the photodiode are optimized to meet the link requirements. The N-well/P-substrate photodiode has a 200-${\mu}m$ by 200-${\mu}m$ optical window, 0.1-A/W responsivity, 7.6-pF junction capacitance and 113-MHz bandwidth. The monolithic receiver can successfully convert 150-Mb/s optical signal into digital data through up to 30-m plastic optical fiber link with -10.4 dBm of optical sensitivity. The receiver occupies 0.56-$mm^2$ area including electrostatic discharge protection diodes and bonding pads. To reduce unnecessary power consumption when the light is not over threshold or not modulating, a simple light detector and a signal detector are introduced. In active mode, the receiver core consumes 5.8-mA DC currents at 150-Mb/s data rate from a single 3.3 V supply, while consumes only $120{\mu}W$ in the sleep mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11A
• /
• pp.1059-1065
• /
• 2010

Recently, analog broadcasting are being converted into digital radio broadcasts, Among the various ways that HD Radio is a candidate for the U.S. approach, Digital Radio will transmit a digital signal to existing analog FM/AM. It provides clear sound quality, traffic information, weather information and various value-added services. In addition, the converted digital radio will be able to meet demand to growing demand for analog FM. In this paper, Digital FM Radio system in the same frequency band using electric field strength of the received digital radio broadcasting interference effects were analyzed. And Digital FM Radio Receiver interference effects were analyzed by interference signal power and signal power. Results were confirmed by applying equation at minimum field strength and SNR.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.589-602
• /
• 2009

The phenomenon degrading reception performance of DVB broadcasting signal is caused by collocation of plural communication modules in the GSM-900 cellular phone with a built-in DVB-H receiver. This paper offers how to improve performance of the DVB-H receiver by applying digital filter that is using DSP techniques to cancel GSM signal interfering to the DVB-H receiver which is collocated in a single user's GSM terminal. In the demodulation part of the DVB-H receiver, the DVB reception performance can be greatly improved by removing interference components of GSM signal, which is flowed with DVB signal, to the noise cancellation filtering algorithm using difference of characteristics between GSM modulated signal and OFDM signal.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.6-11
• /
• 2007

This paper proposes CMOS optical receivers to reduce effective area and pulse width distortion (PWD) in high definition digital audio interfaces. To mitigate effective area and PWD, proposed receivers include a frans-impedance amplifier (TIA) with dual output and a level shifter with threshold convergence, respectively. Proposed circuits are fabricated using $0.25{\mu}m$ CMOS process and measured result demonstrated the effective area of $270\times120{\mu}m^2$ and PWD of ${\pm}3%$ for the receiver with a dual output TIA, and the effective area of $410\times140{\mu}m^2$ and PWD of ${\pm}2%$ for the receiver with a threshold convergence level shifter.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.4
• /
• pp.186-193
• /
• 2005

The Terrestrial Digital Multimedia Broadcasting (T-DMB) system supplies high quality audio comparable with VCD in 7 inch display and high quality audio comparable CD at the mobile reception environment T-DMB will launch commercial service at the middle of 2005. However the bandwidth for audio data and the number of channels are restricted to 128 kbps and 2 respectively in the current T-DMB standard because of the limitation of available bandwidth for multimedia data. This Paper Proposes a novel media processor structure for providing multi-channel audio contents oyer T-DMB system allowing backward compatibility with the legacy T-DMB receiver. Furthermore. we also Propose an adaptive receiver structure to supply optimal audio contents on various speaker configuration in T-DMB receiver. To provide multi-channel audio contents allowing backward comaptilbity with the legacy T-DMB receiver, the additional data for multi-channel audio are defined as a dependent stream of main audio stream. The OD strucure for control an additional multi-channel audio elementary stream is proposed without changing the BIFS of the legacy T-DMB system.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.587-592
• /
• 2002

A new digital correlator fur an airborne synthetic aperture radiometer was designed in order to replace the conventional analog correlator unit which will become very complicated while the number of channels is increasing. The digital correlator uses digital IQ demodulator instead of the intermediate frequency (IF) phase shifter to make the correlation processing performed digitally at base band instead of analogly at IF. This technique has been applied to the digital receiver in softradio. The down-converted IF signals from each pair of receiver channels become low rate base-band digital signals after under-sampled, Digitally Down-Converted (DDC), decimated and filtered by FIR filters. The digital signals are further processed by two digital multipliers (complex correlation), the products are integrated by the integrators and finally the outputs from the integrators compose of the real part and the imaginary part of a sample of the visibility function. This design is tested by comparing the results from digital correlators and that from analog correlators. They are agreed with each other very well. Due to the fact that the digital correlators are realized with the help of Analog-Digital Converter (ADC) chips and the FPGA technology, the realized volume, mass, power consumption and complexity turned out to be greatly reduced compared with that of the analog correlators. Simulations show that the resolution of ADC has an influence on the synthesized antenna patterns, but this can be neglected if more than 2bit is used.

• Journal of Advanced Navigation Technology
• /
• v.3 no.1
• /
• pp.52-59
• /
• 1999

Digital microwave wideband receiver including linear amplifier, analog-to-digital converter(ADC) and digital signal processor is able to analyze its performance using sensitivity and dynamic range of system. Determination of gain, third-order intermodulation products and ADC characteristics and design criteria for the linear amplifier chain is essential problem for sensitive and dynamic range. Also, if there are two signals with frequencies very close, digital signal processor must be able to separate the two signals. In this paper, we measured dynamic range as gain was changed and determined gain value for the proper sensitivity and dynamic range and high resolution spectrum estimation was used to separate two close signals.

• Imaging Science in Dentistry
• /
• v.33 no.2
• /
• pp.91-95
• /
• 2003

Purpose : To compare the diagnostic accuracy of proximal caries detection between Kodak Insight film and the Biomedisys CDX2000HQ digital (CCD) sensor. Materials and Methods: 156 proximal surfaces of extracted teeth, 78 of which had chemical artificial caries, were used in this study. Four observers interpreted the radiographs using a five-point confidence rating scale to record their diagnoses. The results were analyzed by receiver operating characteristic curves, ANOVA and Kappa values. Result: Analysis using receiver operating characteristic curves revealed the areas under each curve which indicated a diagnostic accuracy of 0.951 in Insight and 0.952 in CDX2000HQ digital sensor. ANOVA revealed no significant differences between the two images with respect to caries detection. Kappa values indicated that the mean intra-observer agreement was 0.85 and inter-observer agreement 0.71 in conventional radiography. In digital radiography, the mean intra-observer agreement was 0.84 and inter-observer agreement 0.72. Conclusion: The results suggest that no significant difference exists between the two modalities for artificial caries detection and that CDX2000HQ was as good as Insight film for this purpose.

• Asia pacific journal of information systems
• /
• v.32 no.4
• /
• pp.830-856
• /
• 2022

The Digital Government landscape is changing to reflect how governments try to discover innovative digital solutions, and how they transform themselves in the process. In addition, with the advent of information and communication technology (ICT), e-governance became an essential part of the government. Among the services provided by the Korean government, the Minwon24 online portal is the most used one. However, it has some processing limitations, namely: (1) it provides a cumbersome document authenticity service; (2) people cannot know what happened even if the agency handles the documents arbitrarily. To address the issues outlined above, blockchain processing can be a good alternative. It has a tremendous potential in that it has maximum transparency and a low risk of being hacked. Resource management is one of the areas where blockchain is frequently used. The present study suggests a new model based on blockchain for Minwon24; the proposed model is a type of resource management. There are three participants: issuer, owner and receiver. The proposed model has two stages: issuing and exchanging. Issuing is creating civil documents on the database, which is BigchainDB in this study. Exchanging, the next stage, is a transaction between the owner and the receiver. Based on this model, the actual program is built with the programming language Python. To evaluate the model, the study uses various criteria and it shows the excellence of the model in comparison to others in prior research.