• 전자공학회논문지SC
• /
• 제41권6호
• /
• pp.67-74
• /
• 2004

기존의 아날로그 제어방식과는 달리 디지털 제어 방식은 기본적으로 마이크로프로세서를 포함하고 있기 때문에 아날로그 제어방식에서는 할 수 없었던 DC-DC 컨버터 내부 파라미터에 대한 모니터링이 가능하며, 아날로그 제어방식에서는 처음의 사양에 의해 고정된 출력전압을 얻었지만 디지털 제어 방식에서는 PC와 DC-DC 컨버터의 통신을 통하여 사용자가 원하는 임의의 전압을 얻어낼 수 있고 원격제어가 가능하다. 또한 PC와의 통신을 통해 원거리에 있는 DC-DC 컨버터에 정확한 전압이 출력되고 있는지 또는 비정상적인 전압이 출력되고 있는지를 감시, 진단할 수 있다는 장점을 가지고 있다. 본 논문에서는 이와 같은 디지털 제어기의 장점과 함께 디지털 제어기의 저가격화에 대한 실용성을 제시하고자 하였다. 이러한 기능들을 구현하기 위해 AD 컨버터와 PWM 로직이 내장되어 있는 저가의 정수형 On-chip 마이크로 콘트롤러인 Renesas사의 H8/3672를 사용하였다. 디지털 제어기는 Flyback 컨버터에 적용되었으며, DC 20∼30V 입력으로부터 기본 DC 5V 출력전압을 갖도록 설계되었고, 또한 에뮬레이터를 이용하여 PC상에서 원격으로 DC 0V에서 DC 5V이상까지의 다양한 출력 전압을 만들 수 있다. PWM의 듀티(Duty) 제어를 위한 제어기로써는 PID제어기 중에서 PD제어기를 사용하였다. 본 논문에서 설계된 디지털 제어방식 컨버터의 실용성을 검토하기 위해 과도상태의 특성과 정상 상태의 특성을 분석하여 정수형의 저가형 마이크로 콘트롤러를 이용한 Flyback 컨버터의 실용성을 검토하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.1989-2000
• /
• 2015

In this paper, digital peak current mode control for single phase H-bridge inverters is developed and implemented. The digital peak current mode control is achieved by directly controlling the PWM signals by cycle-by-cycle current limitation. Unlike the DC-DC converter where the output voltage always remains in the positive region, the output of DC-AC inverter flips from positive to negative region continuously. Therefore, when the inverter operates in negative region, the control should be changed to valley current mode control. Thus, a novel control logic circuit is required for the function and need to be analyzed for the hardware to track the sinusoidal reference in both regions. The problem of sub-harmonic instability which is inherent with peak current mode control is also addressed, and then proposes the digital slope compensation in constant-sloped external ramp to suppress the oscillation. For unipolar PWM switching method, an adaptive slope compensation in digital manner is also proposed. In this paper, the operating principles and design guidelines of the proposed scheme are presented, along with the performance analysis and numerical simulation. Also, a 200W inverter hardware prototype has been implemented for experimental verification of the proposed controller scheme.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.442-446
• /
• 1998

With the advent of the high-speed microprocessor and DSP, the possibility of executing a control strategy in digital domain has become a reality. By the use of the DSP and microprocessor controller, many high power converters such as especially inverter and motor drive system may be enhanced resulting in the improved robustness to EMI, the ability to communicate the operating conditions and the ease of adjusting the control parameters. But, the digital controller using DSP or microprocessor is not applied in the high frequency switching power supplies, especially full bridge dc/dc converter. So, this paper presents the method and realization of designing a digital-to-phase shift PWM circuit for full digital controlled phase-shifted full bridge dc/dc converter with zero voltage switching. The operating principles, simulation and experimental results will be presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.807-810
• /
• 2004

This is a experimental result which is reported with using 16-Bit microprocessor H8 series of Renesas company, organizing digital control which is practicable PWM embodiment, and applying switched-mode power supply. The basic topology consists of the active clamp forward DC-DC converter which is widely used for the highly efficient power supply these days. In an experiment, it incites the result to lay emphasis on the highly efficient operation of converter, and performance of digital control which is practicable PWM embodiment. And it is debated on performance of processor and condition for improving performance of part.

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.277-284
• /
• 2010

This paper presents a novel hybrid carrier based space vector modulation for cascaded multilevel inverters. The proposed technique inherits the properties of carrier based space vector modulation and the fundamental frequency modulation strategy. The main characteristic of this modulation are the reduction of power loss, and improved harmonic performance. The carrier based space vector modulation algorithm is implemented with a TMS320F2407 digital signal processor. A Xilinx Complex Programmable Logic Device is used to develop the hybrid PWM control algorithm and it is integrated with a digital signal processor for hybrid carrier based space vector PWM generation. The inverter offers less weighted total harmonic distortion and it operates with equal electrostatic and electromagnetic stress among the power devices. The feasibility of the proposed technique is verified by spectral analysis, simulation, and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1269-1271
• /
• 2004

This is a thesis experiment result which is reported with using 16-Bit microprocessor H8 series of Renesas company, organizing digital control which is practicable PWM embodiment, and applying switched-mode power supply. The basic topology consists of the active clamp forward DC-DC converter which is widely used for the highly efficient power supply these days. In an experiment, it incites the result to lay emphasis on the highly efficient operation of converter, and performance of digital control which is practicable PWM embodiment. And it is debated on performance of processor and condition for improving performance of part.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.356-359
• /
• 2001

In this paper, the new control algorithm is proposed that compensates instantaneously the active and reactive components of the input currents by the synchronous d,q axis conversion of a single-phase current in controlling the single-phase AC/DC parallel converters for a high speed train. The leakage inductance of a transformer was used as a boost inductance and the ripple of a transformer's primary current was reduced considerably by the parallel operation of the two converters with a proper switching phase-shift. The stable and fast control response characteristic is certificated by a simulation.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.897-900
• /
• 2007

본 논문은 BLDC 서보모터를 사용하는 power-by-wire(PBW) 시스템을 위한 DSP 제어기와 IGBT 인버터 드라이버를 설계하는 연구를 제안한다. 이 BLDC 서보모터 시스템은 DSP(Digital Signal Processor)와 IGBT 인버터 모듈로써 구현되어진다. PBW 시스템은 직선 추력 동작을 위해 서보 모터의 속도 제어가 필요하다. 본 논문에서는 벡터 제어와 min-max PWM 기술로 이러한 서보 제어기를 구현한다. 제어기의 CPU로써, TMS320F2812 DSP는 PWM(펄스폭변조) 파형발생기, A/D변환기, SPI(직병렬인터페이스) 포트 그리고 많은 입/출력 포트 등을 가지고 있기 때문에 채택되었다.

• 전자공학회논문지S
• /
• 제36S권2호
• /
• pp.108-119
• /
• 1999

본 연구에서는 입력 선전류 파형이 거의 정현적으로 되고 역률이 1이 되는 3상 AC/DC Boost 콘버터를 제안하였다. 이 콘버터의 전류 제어는 고정된 스위칭 주파수로 동작되는 공간 벡터 PWN법이 적용되고 선전류는 한 샘플링 구간내에서 기준 전류를 추종하게 된다. 전류 제어를 위한 공간 벡터 PWM법을 적용하기 위하여 DSP를 사용하여 디지털 제어 방법으로 구현하였으며, 이 제어 기법으로 구동되는 3상 AC/DC Bost 콘버터는 일정한 스위칭 주파수로 동작하며 입력 선 전류가 거의 정현파에 가깝고, 작은 DC 링크 캐피시터를 적용함에도 불구하고 출력 전류와 전압의 리플이 작으며, 부하변화시와 입력 전압 변화시에도 오버슈트없이 기준전류를 잘 추종하게 된다.

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.255-259
• /
• 2015

We have proposed and experimentally verified a pulse-width modulation (PWM) generator which directly generated a PWM signal in the optical domain. Output waveforms were clear at the repetition rate of 16 MHz; the duty cycle (DC) was from 14.7% to 72.1%; and the DC-control resolution was about 4.399%/dB. The PWM generator' operation principle is based on the injection-locking property of a single-mode Fabry-$P{\acute{e}}rot$ laser diode (SMFP-LD). The SMFP-LD, which has a self-locked mode wavelength at ${\lambda}_{PWM}$, was used to detect the power of the injection-locking signal (optical analog input). If the analog input power is high, the SMFP-LD is locked to the wavelength of the input signal ${\lambda}_a$ and there is no output after an optical bandpass filter (OBF). If the analog input power is low, the SMFP-LD is unlocked and there is output signal at ${\lambda}_{PWM}$ after the OBF. Thus, the SMFP-LD plus the OBF provide digital output for an analog input. The DC of the output PWM signal can be controlled by tuning the power of the analog input.