• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.418-424
• /
• 2005

We present the design, fabrication and experimental results of 4-bit digital microinjectors, whose ejected droplet volumes are adjusted by the digital operation of a 4-bit microheater array. We design the reference microinjectors as well as its comparative test structures. In the fabrication process, we use a five-mask micromachining process and the total chip size of the fabricated microinjector is $7,640{\mu}m{\times}5,260{\mu}m.$ We measure the ejected droplet volumes and velocities, which are adjusted from $12.1{\pm}1.0~55.6{\pm}14.7pl\;and\;2.3{\pm}0.1~15.7{\pm}0.8m/s.$ respectively, depending on the 15 possible combinations of 4-bit microheater array. We also experimentally characterize the effect of geometric variation including the microheater size, inter-microheater gap, microchannel width and sequential operation of microheater array on the ejected droplet volume and velocity. Among these parameters, we find that the microheater size is the most dominant parameter affected to the ejected droplet volumes and velocities. Thus, the present microinjector has a potential for application to the high-resolution inkjet printers with multiple gray levels or high-precision fluid injectors with variable volume control.

• 대한공간정보학회지
• /
• 제24권2호
• /
• pp.71-78
• /
• 2016

After the 'Guidelines for the preservation of digital heritage' were published by UNESCO, interests in the fabrication of digital cultural heritage have been increasing throughout the world. The present study was intended to fabricate digital cultural heritages for existing cultural properties using the reverse engineering technology and obtain two-dimensional drawings. Jinju Castle Gongbukmun, which is a cultural property, was selected as a study subject and 3D modeling of Jinju Castle Gongbukmun was conducted by implementing 3D scanning and processing the point cloud data. Using the Gongbukmun 3D model (3D-Gongbukmun) made as such, requirements as a digital heritage were reviewed and 2D drawings of Gongbukmun such as front views, ground plans, and side views could be prepared.

• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.483-489
• /
• 2019

디지털치의학의 발달과 함께 computer-aided design and computer-aided manufacturing (CAD/CAM)을 이용한 3D 제작산업이 최근 급격한 성장을 하고 있다. 디지털 방식을 이용한 의치 제작 또한 최근의 디지털치의학 기술의 발전으로 증가하는 추세에 있다. CAD/CAM 제작방법은 크게 두가지 타입으로 나눌 수 있다: 절삭가공, 적층가공, 밀링과 같은 절삭가공은 블록 형태의 재료를 깎아 제조하는 기술을 토대로 하며, 3D printing과 같은 적층가공은 재료를 적층 방식으로 쌓아 올려 제조하는 기술을 토대로 한다. 적층가공은 밀링이 어려운 복잡한 구조의 제작에 적용할 수 있다. 본 증례에서, 적층가공방법이 레진상 총의치 제작에 이용되었다. 디지털방식을 적용한 의치의 사용기간동안 기능적, 심미적으로 만족할 만한 결과를 보여주었다.

• 대한치과보철학회지
• /
• 제62권1호
• /
• pp.6-19
• /
• 2024

Computer aided design/Computer aided manufacturing (CAD-CAM) 기술의 발전에 따라 이를 활용한 총의치 제작 방법이 대두되고 있으며, 그 중 하나로 의치상과 인공치의 색조를 모두 포함하는 모놀리식 블록을 절삭하는 디지털 의치 시스템이 소개되었다. 본 증례는 74세 남성, 73세 여성 두 환자에서 전통적인 기존 의치 제작법, 디지털 방식의 모놀리식 블록을 절삭한 의치 제작법으로 각각 총 두 쌍의 상·하악 의치를 제작하여 비교한 증례이다. 디지털 방식의 총의치 제작 과정으로는 CAD-CAM 프로그램으로 개인 트레이를 디자인 및 3D프린팅 하여 최종인상 및 악간 관계 채득하였다. 이후 동일한CAD-CAM프로그램으로 총의치 디자인 및 시적의치를 3D 프린팅 하여 시적 하였다. 최종적으로는 모놀리식 블록(Ivotion, Ivoclar Vivadent, Schaan, Liechtenstein)을 밀링 기계(PrograMill PM7, Ivoclar Vivadent, Schaan, Liechtenstein)로 절삭하여 총의치 제작 및 장착하였다. 해당 증례에서는 CAD-CAM 시스템을 이용한 총의치 제작과 동시에 전통적 방법으로도 총의치를 제작하여2쌍의 의치의 안정 및 적합성, 발음, 저작, 심미성과 환자의 만족도를 비교, 분석하여 이를 보고하고자 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.411-414
• /
• 2004

This paper introduces a modulation method for digital wireless communication based on general DS-QPSK. The design and fabrication is for home networking application to a typical RF transmitter with DS-QPSK modulator. This modulator implemented using VHDL hardware programming language, the fabrication of IC chip $5{\times}5 mm^2$ was carried by 27th IDEC MPW(Multi Project Wafer) process in 0.35${\mu}m$ rule at Samsung Inc. This paper presented the important of this technology for the future application in wireless sensor. This module can be efficient usage for home network to transmit the RF wireless sensor system.

• Elastomers and Composites
• /
• 제44권2호
• /
• pp.112-115
• /
• 2009

자연계에 존재하는 다양한 생명체 중 몇몇은 벽이나 천장을 자유자재로 걸어다니거나 뛰어다닌다. 이러한 생명체 중 대표적으로 Tokay Gecko는 그 발가락 표피에 수십억개의 주걱모양의 나노헤어를 가지고 있으며, 이러한 나노헤어는 부착하고자 하는 표면과의 원자수준의 끌어당기는 힘을 발생시키게 되며 이 힘을 이용해 접착제 없이 부착력을 얻게 되는 것이다. 최근 $7{\sim}8$년 동안 많은 연구자들은 이를 모방한 건식부착물의 제작 연구를 수행하고 있으며, 본 논문에서는 이러한 연구들의 개관을 통해 향후 연구방향에 대해 논의하고자 한다.

• 한국멀티미디어학회논문지
• /
• 제17권2호
• /
• pp.266-275
• /
• 2014

As contemporary men's clothing is becoming slimmer, people consider it important not only the existing simple design, but also intricate design and its fitness that can complement one's body. Therefore, in this study, we reproduced Men's wear fabrication process with 3D process. As a result, it was well received, as it can check the fitness, and allows modifying the design and mixing different texture easily.

• Journal of information and communication convergence engineering
• /
• 제8권1호
• /
• pp.103-106
• /
• 2010

In this paper, the delay times were evaluated to develop highly reliable time-to-digital converter(TDC) in analog and digital delay element structures. The delay element can be designed by using current source or inverter. In case of using inverter, the number of inverter has to be controlled to adjust the delay time. And in case of using current source, the current for charging and discharging is controlled. When the current source is used the delay time of the delay element is not sensitive with varying the channel width of CMOS. However, when the inverter is used the delay time is directly related to the channel width of CMOS. Therefore to obtain good reliability in TDC circuit the delay element using current source is more stable compared to inverter in the viewpoint of the variation of fabrication process.

• Journal of Oral Medicine and Pain
• /
• 제44권2호
• /
• pp.74-76
• /
• 2019

A conservative treatment approach to temporomandibular disorder (TMD) is recommended as the first line of management, usually with a stabilization splint. Recently, computer-aided design/computer-aided manufacturing and three-dimensional printer has been widely used in the dentistry since several years ago. The authors apply digital dentistry in oral medicine fields to make stabilization splint for TMD treatment.

• 한국실내디자인학회논문집
• /
• 제25권1호
• /
• pp.24-34
• /
• 2016

The notion of materiality in architecture has existed throughout its history, and it has begun to discussed in earnest as an important architectural discourse since early twentieth century, when the Industrial Revolution and its consequent mass-production system has fundamentally changed the means and methods of architectural production. However, this traditional notion of materiality is not fully engaged with today's digital paradigm, and not able to inquire into the complex aspects of contemporary architectural process, because their theoretical and perceptional bases are still remaining in modern era. In this shifting context, this study is intended to develop a new concept of digital materiality which corresponding to contemporary digital and material culture. This paper speculates and argues digital materiality as an active ingredients of contemporary design process as well as a comprehensive logical system that negotiate with various geometric conditions. The purpose of this study is to analyze and investigates the distinctive characteristics of Office dA's architectural design process in the digital realm.