• International Journal of Control, Automation, and Systems
• /
• v.4 no.4
• /
• pp.506-515
• /
• 2006

This paper studies an intelligent digital control for nonlinear systems with multirate sampling. It is worth noting that the multirate control design is addressed for a given nonlinear system represented by Takagi-Sugeno (T-S) fuzzy models. The main features of the proposed method are that i) it is provided that the sufficient conditions for stabilization of the discrete-time T-S fuzzy system in the sense of Lyapunov stability criterion, which is can be formulated in the linear matrix inequalities (LMIs); and ii) the stability properties of the trivial solution of the digital control system can be deduced from that of the solution of its discretized versions. An example is provided for showing the feasibility of the proposed method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1171-1174
• /
• 2005

This thesis provides a new digital convergence method and apparatus which uses area photo sensor and new analog to digital algorithmic to identify the correct digital pattern position factor of the projection system. This method and apparatus can be applied to the convergence correction in a TV receiver with a display that comprises a display screen with photo sensors positioned adjacent to screen edges. It also can be applied to the manufacture process detection of the projection system to adjust the associative convergence parameter. In this paper, demonstrate how this convergence detecting algorithmic was implemented with four area photo sensors of special designed pattern to the rear projection CRT TV.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.152-157
• /
• 2009

In designing and manufacturing a submarine, an expensive real mock up is usually built as a reference because of the spatial constraints of a submarine. This paper presents an integrated and automated design process for a submarine that uses a digital mock up. Various equipment libraries are built for feature based design. Using the developed digital mock up, this paper shows various ways to verify the design, including a space analysis to check for any interference between pieces of equipment and the hull and an ergonomic analysis using lifelike dummies to examine the work space and operability. As a part of the integrated design system, a design automation system was also developed to generate surface point data for the outer hull, pressure hull, casing, and sail. The whole process was applied to the design of a submarine for verification.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.135-143
• /
• 2009

The purpose of this research is to reduce editors' workload and automation to update(v) Digital Map(n) regarding changed topography. In Digital Map case, it usually uses the way of various survey to update(v). In this case, it costs a great deal and doesn't be efficient backup management. Accordingly, it can reduce editors' the period of the process and be efficiently managed the backup data due to well organized backup data management. We present update plan that used clipping and join for this result by analyzing Boundary of input data.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1978-1979
• /
• 2007

In this paper, the authors introduce a high-speed microprocessor based on automatic vacuum capacitor switch with a modified digital filter design using distributed arithmetic. The automation trends particularly the automatic vacuum capacitor switch has helped ameliorate the power factor essentials and automatically triggered to close when the line current exceeds rated value. Microprocessor relays use digital filters to extract only the fundamental and attenuate harmonics. To provide optimum speed characteristics a distributed arithmetic based filter design in the microprocessor controller which not only enhances filtering speed but additionally enables lower power consumption at the cost of area has been introduced. The result is a unified description that describes a digital filter structure down to bit level.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.243-247
• /
• 2004

The dynamometers which had made in a long time ago could not control the input/output quantity of water minutely and was sensitive to a noise since it was controlled by an analog control method. Therefore, a fully digital controlled system was urgently required to be robust against various noises. In this paper, the new system which can control the amount of circulated water in dynamometer was developed. This system is consisted of an industrial digital type controller and a servo motor. The industrial PLC was used as a main controller for the developed system, and the actuator and servo motor were used to control the inlet and outlet valve independently. The torque signal of load cell was fed back to the main controller to regulate the diesel engines load. Generally, an input/output valve position of the old dynamometer was fixed with a proper situation for an engine output test and the torque was changed according to the time interval. However, the torque value for the dynamometer could not be constantly kept because of the variation of the input water flow and fluid characteristic. Therefore, the automatic control of an inlet and outlet valve should be performed to keep the constant torque. So, the PID control method was applied to solve this problem. Also, the development of a web-based remote control system was described in this paper. This software will give us the convenience of operation, the more efficient operations, and the reduced operator workload for operation of the dynamometer. The application results of the system have been verified at actual diesel engine field.

• Journal of Digital Convergence
• /
• v.13 no.6
• /
• pp.91-103
• /
• 2015

To increase the competitiveness of domestic manufacturers products, CAE system, process and fast delivery of development information and implementation of retrieval system introduced for manufacturers is necessary situation For this purpose, this study analysed instance to build integrated design simulation system that provide design automation, modular design, design standards, automation of quality verification and design knowledge. Also, we discuss that improve design of the new product and increasing the satisfaction of our customers. Completed development of simulation systems are the basic steps, and pilot operation about new product. During pilot operation, the systems is improved. Through this process, the experimental data accumulated to increase the effectiveness of the simulation, and improve the utilization. Therefore, this study have many theoretical, practical value for growing global company.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.351-356
• /
• 2014

Generally, although securing the condition and location of container freights or normal freights, which load a fresh goods, has been a very important issue in the cold-chain system implementations, it has not gotten out of the traditional methods in the related business world yet. To solve this problem, we propose the designing method and architecture which can be used to implement a smart cold-chain monitoring automation systems. The proposed system architecture is based on the oneM2M standards, and it has 3 layers and entities, which can be implemented to S/W and H/W, network services layer and entity, common services layer and entity, application layer and entity. Based on this architecture, we will not only expect an innovative retrenchment of distribution cost, but also automatically secure the freight condition and location.

• Journal of Digital Contents Society
• /
• v.17 no.4
• /
• pp.257-263
• /
• 2016

Cable drum schedule is the final step for the electrical equipment of the power plant, and is assigned cables to efficiently cable drum. In this paper, we have implemented an automated program which cables are scheduled in accordance with the capacity of the cable drum for each cable code. Proposed cable drum schedule was applied to the dynamic programming algorithm to effectively solve the optimization problem, and the implemented program is conducted so as to verify the proposed model. The experiment results show that implemented program eliminates the errors that can occur existing method, so we were able to reduce the design time of cable drum schedule. Cables for the electrical equipment of the power plant is designed to at least 2 million units or more. Thus the automation program to provide applies, it is considered that the design time of the cable drum schedule can be greatly reduced without serious error.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.317-327
• /
• 2014

In present company has been developed various systems for work efficiently and organized. However, each work developed Systems Environment differently by rapid IT advancement; it requires a lot of maintenance cost. Recently many companies need to do systems integration or downsizing migration to save costs for IT maintenance, but most of companies are now develop migration with built new systems by manual work or modify some part only. Also migration requires high cost. In this paper, by focusing in application on the environment of the system components, propose the recycling and utilization of automation tools, application method to reduce the migration cost.