• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1296-1309
• /
• 2024

The aim of this work is to explore the effect of the double subdiffusion on the stability in BWRs. A BWR novel reduced order model with double subdiffusion effects: reduced order fractional model (DS-F-ROM) to describe the neutron and heat transfer processes was proposed for this study. The double subdiffusion was developed with a fractional-order two-equation model, and with different fractional-orders and relaxation times. The stability analysis was carried out using the root-locus method and change from the s to the W domain and were confirmed using the time-domain evolution of neutron flux for a unit step change in reactivity. The results obtained using the reduced fractional-order model are presented for different anomalous diffusion coefficient values. Results are compared with normal diffusion and P1 equations, which are obtained straightforwardly with DS-ROM when relaxation time tends to zero, and when the anomalous diffusion coefficient tends to one, respectively.

• 전기전자학회논문지
• /
• 제21권2호
• /
• pp.123-129
• /
• 2017

고분자 막 연료전지는 높은 전력밀도, 낮은 배출 및 낮은 동작온도 때문에 미래 자동차 및 전력생산의 강력한 보류이다. FEMFC 내부의 기체확산층(GDL)의 중요한 관심은 물의 조절이다. GDL은 소수성 PTFE와 전기전도성을 위해서 탄소로 보통 구성되어 있다. 이 시뮬레이션에서 GDL 흐름은 확립된 방정식 모델의 단순화된 접근법으로 조사되었다. GDL의 성능은 모델 방정식을 이용하여 전지의 내부열, 수증기 밀도 와 산소밀도의 결과를 보였다. FEMFC 촉매층 모델은 유효인자, Butler-volmer 와 수소유동 밀도의 결과를 나타냈다. 이 결과들은 몇 가지 요소들과 함께 영향의 차이는 흥미 가지게 되며 정보는 연료전지를 설계하는데 도움을 줄 것이다.

• 한국수소및신에너지학회논문집
• /
• 제23권1호
• /
• pp.34-42
• /
• 2012

Gas diffusion layers (GDLs) of carbon composite type in polymer electrolyte fuel cells were prepared by simple and cheap manufacturing process. To obtain the carbon composite GDLs, carbon black with polymer binder was mixed in solvent, rolled to make sheet, and finally heat-treated at $340^{\circ}C$. The performance of fuel cell using composite GDLs was changed by PTFE content. The physical properties of composite GDLs for pore, conductivity and air permeability were analyzed to compare with the variation of fuel cell performance. The conductivity of composite GDLs was very similar to carbon paper as commercial GDL but pore properties and air flux were considerably different. The porosity, PTFE content and conductivity for composite GDLs did not have an influence on the cell performance much. The increase of pore diameter and air flux led to enhance cell performance.

• Nuclear Engineering and Technology
• /
• 제21권3호
• /
• pp.193-204
• /
• 1989

본 논문에서는 정보 이론의 maximum entropy Principle을 이용하여 중성자속 분포를 재생하는 새로운 방법을 시도하였다. 어떤 대상에 대한 부분적인 정보가 있을 때, 이 정보의 한도 내에서 entropy를 최대화시키는 확률 분포는 가장 객관적인 것이 된다. Nodal method계산결과인 평균 중성자속과 current의 값을 prior information으로 삼고, 핵 연료 집합체의 경계에서의 중성자속 분포를 확률의 형태로 변환해서 확률로써 다룬다. Prior information의 한도 내에서 entropy를 최대화시키는 경계에서의 확률 분포를 구하면 핵연료 집합체의 경계에서의 중성자속 분포가 구해지는데, 이것을 경계조건으로 heterogeneous assembly calculation을 행하여 세부적인 중성자속 분포를 구한다. 이 새로운 방법을 몇 개의 benchmark problem assembly에 응용해 본 결과, 노심의 안쪽 부분에서는 이 방법이 form function method에 의한 것과 비슷한 정확도를 보였고 바깥 부분에서는 다소 큰 오차를 보였다. 본 논문에서는 surface-averaged neutron current를 prior in-formation에 포함시키지 못했는데, 이것을 포함시키면 결과가 훨씬 개선 될 것으로 보인다.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제22권1호
• /
• pp.1.1-15
• /
• 1994

열대 대서양의 해표면으로부터 500m 깊이까지의 계절별 담수 및 염분의 수송량과 방향을 조사하기 위하여, 먼저 연속방정식과 염분보존방정식에서 각각 이론적인 계산방법을 유도하고 관측자료를 사용하여 수송값들을 얻었다. 담수(강수량, 증발량, 그리고 강물방출량)의 기후자료에서 계산된 표면의 당수발산장을 북쪽에서 남쪽방향으로 적분하여 담수수송값을 얻었디. 연간 담수수송량의 방향은 북향으로 수송량은 적도부근에서 가장 적었고 (0 Sv), $12^{\circ}N와{\;}20^{\circ}{\;}N$부근에서 가장 많았다(0.3 Sv). 게절별 수송량의 크기는 북향 1.35 Sv괴 남향 O.45 Sv의 사이의 값을 보였고 강한 북향 수송량이 여름과 가을사이의 전이기간에서 나타났다. 이러한 계절별화는 지역적인 담수저장의 변화 뿐만 아니라 열대 수렴대의 이동과 관련이 있었다. 1900~86 기간의 염분관측값을 객관분석(objective analysis)한 후, 연간 및 계절별 염분 수송값을 계산하는데 사용하였다. 수평이류에 의한 염분수송량이 수형확산에 의한 수송량과 균형을 이룸으로 해서 연간 수송량은 없었다. 딘지 수평확산에 의한 염분수송량은 북향이었고 $15^{\circ}{\;}N$에서 최대값($5{\times}10^6kg/s$)을 보였다. 계절별 수송량의 크기는 북향 $30{\times}10^6kg/s$과 남향 $35{\times}l0^6kg/s$사이의 범위내에 있었다. 계절별 수송방향은 여릉과 가을사이의 기간을 제외하고 다른 기간에서 북향이었다.

• Journal of Pharmaceutical Investigation
• /
• 제33권2호
• /
• pp.79-84
• /
• 2003

The effects of various pressure sensitive adhesives (PSA) and enhancers on the percutaneous absorption of tulobuterol were investigated. The permeation rate of tulobuterol through hairless mouse skin from various adhesives was evaluated using a flow-through diffusion cell system at $37^{\circ}C$. The permeability of tulobuterol was variable depending on the physicochemical property of the PSA. The permeation rate of tulobuterol from polyethylene oxide grafted acrylic adhesive matrix was higher than that from other PSA matrices. The flux of tulobuterol was $4.37{\pm}0.34\;{\mu}g/hr/cm^2$ from polyethylene oxide grafted acrylic adhesive matrix. When the effects of various enhancers on the percutaneous absorption of tulobuterol from grafted acrylic adhesive were evaluated, Plurol $oleique^{\circledR}$ showed higher flux than all other enhancers tested.

• 전기의세계
• /
• 제19권4호
• /
• pp.18-23
• /
• 1970

A neutron detector, in general, can not be utilized as the thermal neutron detecting chamber in the nuclear power reactor, especially P.W.R. due to the characteristics of high temperature, high pressure and high neutron flux in a reactor vessel. We have performed an experiment to detect the thermal neutrons at 400.deg. C and high flux of thermal neutron in a power reactor. Coating boron-10 on the aluminium plates by means of surface diffusion method at 600.deg. C for 5 hours in an electric furace, also we made a typical chamber which was compensated ionization chamber filled with free air as an ionization gas. It was checked the chamber characteristics in the TRIGA MARK-II Reactor at the power level from zero to 250KW. The chamber current showed a perfect linear increase to power increase. However, many variation of the measured current were observed within the power of 50KW.

• 수산해양기술연구
• /
• 제27권3호
• /
• pp.184-192
• /
• 1991

In many combustion systems, swirling combustion air is extensively applied as an aid for stabilization of high intensity combustion pocesses. Swirl, generally, causes significant effects on the flow field which, in turn, determines the size, shape, and stability of flames, and combustion intensity. The purpose of this study is to investigate the effect of swirls on flames produced from a model combustor designed in this paper. In order to impart swirls to the combustion air, a movable block swirl generator was used. Temperature distribution and radiative heat flux along the centerline of the swirling flame were measured. Data obtained from these swirl flows can be used as design data for high intensity or high efficiency combustion systems. The results obtained are summarized as follows: 1. Flame temperature profiles were measured at various swirl number. 2. The axial distance for maximum temperature from the centerline of burner increased as the swirl number increased. 3. Radiative heat flux increased as the swirl number and axial distance from burner increased.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.213-218
• /
• 1999

The $LiBr-H_{2}O$ absorption process on a horizontal tube has been analyzed using the numerical method which incorporates the fully elliptic Navier-Stokes equations for the momentum equations, the energy and mass-diffusion equations. On a staggered grid, the SIMPLER algorithm with the QUICK scheme is used to solve these equations along with the MAC method for the free surface tracking. With the assumption that the absorbent is linear, calculations have been made for various inlet temperature and flow-rate conditions. The detailed results of the parametric study, such as the temperature, concentration, absorption mass flux and wall heat flux distributions are presented. The self-sustained feature of the absorption process is clearly elaborated. The analyses have also been carried out for multiple tube arrangement and the results show that the absorption rate converges after a few tube rows.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.722-725
• /
• 2004

An experimental investigation was conducted to investigate the effects of the equivalence ratio and air mass flux on the combustion efficiency in a solid fuel ramjet used fuel grains which were highly loaded with boron carbide. Combustion efficiency increased with increasing equivalence ratio (grain length), and decreasing air mass flux. Higher inlet air temperature produced higher combustion efficiencies, apparently the result of enhanced combustion of the larger boron particles those bum in a diffusion controlled regime. Short grains which considered primarily of the recirculation region produced larger particles and lower combustion efficiencies. The result of the normalized combustion efficiency increased with inlet air temperature, is coincident with the result of the Brayton cycle thermal and the total efficiency relating to the heat input.