• Journal of the Korean Society of Combustion
• /
• v.4 no.2
• /
• pp.75-83
• /
• 1999

The effect of temperature distributions on soot volume fraction in double-concentric diffusion flames have been investigated experimentally. Using fine thermocouple wires and a rapid insertion mechanism, we have measured temperature without the effect of soot particles attached to the thermocouple junction, which can lower the temperature signal about 100 K by increasing the heat loss from the junction by radiation. The temperature at the flame axis is higher in the double-concentric diffusion flames than in normal co-flow diffusion flames because of the inverse diffusion flame. However, it is almost the same as that at the periphery of normal flames, on which the inverse flame does not have an effect. Thus, the lower soot concentration found in the double-concentric diffusion flame can be explained by the effect of nitrogen diffusion from the central air jet.

• Computers and Concrete
• /
• v.3 no.2_3
• /
• pp.103-122
• /
• 2006

Drying shrinkage of concrete occurs due to the loss of moisture and thus, it is controlled by moisture diffusion process. On the other hand, the shrinkage causes cracking of concrete and affects its moisture diffusion properties. Therefore, moisture diffusion and drying shrinkage are two coupled processes and their interactive effect is important for the durability of concrete structures. In this paper, the two material parameters in the moisture diffusion equation, i.e., the moisture capacity and humidity diffusivity, are modified by two different methods to include the effect of drying shrinkage on the moisture diffusion. The effect of drying shrinkage on the humidity diffusivity is introduced by the scalar damage parameter. The effect of drying shrinkage on the moisture capacity is evaluated by an analytical model based on non-equilibrium thermodynamics and minimum potential energy principle for a two-phase composite. The mechanical part of drying shrinkage is modeled as an elastoplastic damage problem. The coupled problem of moisture diffusion and drying shrinkage is solved using a finite element method. The present model can predict that the drying shrinkage accelerates the moisture diffusion in concrete, and in turn, the accelerated drying process increases the shrinkage strain. The coupling effects are demonstrated by a numerical example.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.3
• /
• pp.320-334
• /
• 2014

Over the last two decades, numerous experimental and numerical efforts have examined physical phenomena in plasma discharge devices. The physical mechanisms that govern the anomalous electron diffusion from the cathode to the anode in the Hall Effect Thruster (HET) are not fully understood. This work used 1-D numerical method to improve our understanding and gain insight into the effect of the anomalous electron diffusion in the HET. To this end, numerical solutions are compared with various experimental HET performance measurements and the effects of anomalous electron diffusion are analyzed. The relationships between the anomalous electron diffusion and important parameters of the HET are also studied quantitatively. The work identifies the cathode mass flow rate fraction, radial magnetic field distribution, and discharge voltage as significant factors that affect anomalous electron diffusion. Additionally, the study demonstrates a computational process to determine the radial magnetic field distribution required to achieve specific thruster performance goals.

• Journal of Contemporary Eastern Asia
• /
• v.14 no.1
• /
• pp.45-55
• /
• 2015

This paper examines the diffusion of smartphones with a special emphasis on the diffusive interactions between Apple iOS and Google Android in a global context. Since the two mobile platforms were first introduced in the market, the use of smartphones has skyrocketed, suggesting that the dramatic diffusion of smartphones may be explained in part by the growth and competition of these two platforms. To study this, an extended Bass model is applied to a data set of quarterly smartphone sales between 2008 and 2013 for 15 countries. Our findings suggest that the innovation effect was more salient for iOS than for Android in developed countries, whereas the imitation effect was more striking for Android than for iOS in developing countries. Furthermore, our results from the co-diffusion model suggest that the diffusion of Android negatively affected by the diffusion of iOS, but not vice versa.

• Korean Management Science Review
• /
• v.32 no.4
• /
• pp.81-96
• /
• 2015

This paper models knowledge diffusion on an inter-organizational network. Based on literatures related to knowledge diffusion, the model considers critical factors that affect diffusion behavior including nodal property, relational property, and environmental property. We examine the relationships among network structure, knowledge search, and diffusion performance. Through a massive simulation runs based on the agent-based model, we find that the average path length of a network decreases a firm's cumulative knowledge stock, whereas the clustering coefficient of a firm has no significant relationship with the firm's knowledge. We also find that there is an interaction effect of network structure and the range of knowledge search on knowledge diffusion. Specifically, in a network of a larger average path length (APL) the marginal effect of search conduct is significantly greater than in that of a smaller APL.

• Korean System Dynamics Review
• /
• v.13 no.4
• /
• pp.33-55
• /
• 2012

The research is to identify important diffusion factors and their effects on green car diffusion process using system dynamics perspectives and a causal-loop analysis. Through a deep review on previous research, we have found the important factors of green car diffusion process. Price, driving range, network effect, recharge system, fuel cost had important facilitation on consumer attraction and green car diffusion. Based on the review, we have constructed a causal loop diagram explaining hybrid car diffusion process. We have found 3 important reinforcing loops in the causal loop diagram. Loop for learning & economies of scale(supply side), loop for network effect(consumer side), and loop for battery development(technology side) had most significant roles in the whole diffusion process. Through a deliberate analysis on the 3 causal loops, we have found meaningful results. First, there seems to exist a critical mass in the diffusion. Second, of the 3 loops, the battery technology had most significant role. Third, not consumer installed base but sales must be a standard to decide whether the critical mass is achieved or not. Based on these findings, several meaningful implications are suggested for the government and corporations related to the green car industries.

• Geomechanics and Engineering
• /
• v.37 no.2
• /
• pp.97-107
• /
• 2024

The accurate prediction of grouting upward diffusion height is crucial for estimating the bearing capacity of tip-grouted piles. Borehole construction during the installation of bored piles induces soil unloading, resulting in both radial stress loss in the surrounding soil and an impact on grouting fluid diffusion. In this study, a modified model is developed for predicting grout diffusion height. This model incorporates the classical rheological equation of power-law cement grout and the cavity reverse expansion model to account for different degrees of unloading. A series of single-pile tip grouting and static load tests are conducted with varying initial grouting pressures. The test results demonstrate a significant effect of vertical grout diffusion on improving pile lateral friction resistance and bearing capacity. Increasing the grouting pressure leads to an increase in the vertical height of the grout. A comparison between the predicted values using the proposed model and the actual measured results reveals a model error ranging from -12.3% to 8.0%. Parametric analysis shows that grout diffusion height increases with an increase in the degree of unloading, with a more pronounced effect observed at higher grouting pressures. Two case studies are presented to verify the applicability of the proposed model. Field measurements of grout diffusion height correspond to unloading ratios of 0.68 and 0.71, respectively, as predicted by the model. Neglecting the unloading effect would result in a conservative estimate.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.40 no.4
• /
• pp.107-121
• /
• 2015

Diffusion of innovation is the process in which an innovation is communicated through certain channels over time among the members of a social system. The literatures have emphasized the importance of interpersonal network influences on individuals in convincing them to adopt innovations and thereby promoting its diffusion. In particular, the behavior of opinion leaders who lead in influencing others' opinion is important in determining the rate of adoption of innovation in a system. Centrality has been recognized as a good indicator that quantifies a node's influences on others in a given network. However, recent studies have questioned its relevance on various different types of diffusion processes. In this regard, this study aims at examining the effect of a node exhibiting high centrality on expediting diffusion of innovations. In particular, we considered the situation where two innovations compete with each other to be adopted by potential adopters who are personally connected with each other. In order to analyze this competitive diffusion process, we developed a simulation model and conducted regression analyses on the outcomes of the simulations performed. The results suggest that the effect of a node with high centrality can be substantially reduced depending upon the type of a network structure or the adoption thresholds of potential adopters in a network.

• Journal of Korea Technology Innovation Society
• /
• v.3 no.2
• /
• pp.33-47
• /
• 2000

We focus on the investigations of the effect of social networks on the diffusion of innovations, in order to successfully bring innovations into markets. We begin with consideration of social system from Rogers(1995)' perspective, which includes the fifty-year sequential tradition of diffusion studies, and expand the conceptualization into a framework for thinking about the effect of social networks on the diffusion of innovations. We draw upon basic ideas from the research traditions of social network theory in sociology, and social identity theory in social psychology. Finally, we offer propositions for the future empirical researches. A better understanding of social networks can complement research on the diffusion of innovations and help in the development of a universal model of consumer response to innovations.

• 전기의세계
• /
• v.20 no.5
• /
• pp.15-18
• /
• 1971

Up to now, there have been numerous investigations about the effect of diffusion on the wave propagation in gaseous plasmas, but not so much in semiconductor magnetoplasmas. However, currently, it becomes the centor of interest to work with the latter problem, and this paper deals with the dispersion equation including diffusion effect in the latter case to see how diffusion affects the equation in which diffusion term is neglected in the first place, and the analysis is based on the assumption that the plasma can be treated as a hydrodynamical fluid, since, from a macroscopic view point, the plasma interacting with a magnetic field can be considered as a magneto-hydrodynamical fluid, an electrically conducting fluid subjected to electromagnetic force, and the system is linear. The results of the relation and computation show that in the non-streaming case the diffusion terms appear in the equation as perturbation terms and the amplitude of the wave vector changes parabolically with the variation of the angular frequency and the longitudinal modes are observed.