• 한국표면공학회지
• /
• 제20권2호
• /
• pp.49-59
• /
• 1987

The properties of $Cr_2O_3-Al_2O_3-SiO_2$ composite oxide coatings on steel surface were investigated. The results obtained were as follows: The microhardness of oxide coating layer increased with increasing heat-treatment temperature and $Cr_2O_3$ content in coating layer. The hardness showed the highest value (850Hv) treated at 700$^{\circ}C$ for $SiO_2:Al_2O_3:Cr_2O_3$=1:1:4. Increasing heat-treatment temperature, corrosion current density became lower and coating layer became denser. The corrosion current density showed the lowest value $(6.5{\times}10^{-5}\;Acm^2)$ treated at 750$^{\circ}C\;for\;SiO_2:Al_2O_3:Cr_2O_3$=1:1:3. These results were explained by protective layer which was formed during heat-treatment. The bonding between matrix and coating layer is expected to be made mechanically and chemically by the inter diffusion of Ni and Fe. The composite oxide coating was formed by softening of the binder with increasing heat-treatment temperature. The strengthening of coating layer is to be resulted from the dispersion of major oxide particles.

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권4호
• /
• pp.10-13
• /
• 2021

Recently, cable conductors composed of numerous coated conductors have been developed to transport huge current for large-scale applications, for example accelerators and fusion reactors. Various cable conductors such as CORC (Conductor on round core), Roebel Cable, and TSTC (Twisted stacked tape cable) have been designed and tested to apply for large-scale applications. But, these cable conductors cannot improve the engineering critical current density (J_e) because they are made by simple stacking of coated conductors. In this study, multi-HTS (High temperature superconductor) layers on one substrate (MHOS) wire was fabricated to increase the engineering critical current density by using the exfoliation of superconducting layer from substrate and silver diffusion bonding method. By the repetition of these processes, the 10 m long 6-layer MHOS conductor was successfully fabricated without any intermediate layers like buffer or solder. 6-layer MHOS conductor exhibited a high critical current of 2,460A/12mm-w. and high engineering critical current density of 1,367A/mm² at liquid nitrogen temperature.

• Elastomers and Composites
• /
• 제57권1호
• /
• pp.1-8
• /
• 2022

In this study, the photo-deposition method was used to introduce Ag onto the surface of TiO₂ to synthesize an Ag-TiO₂ composite. The effects of the varying amounts of AgNO₃ precursor and annealing time periods on the Ag content in the composites, as well as their antibacterial characteristics under visible light conditions were studied. SEM analysis revealed the spherical morphology of the Ag-TiO₂ composite. Compared with TiO₂, the Ag particles were too small to be observed. An XPS analysis of the Ag-TiO₂ surface confirmed the Ag content and showed the peak intensities for elements such as Ag, Ti, O, C, and Si. The highest Ag content was observed when 33.3 wt.% of AgNO₃ and an annealing time of 6 h were employed; this was the optimum annealing time for Ti-Ag-O bonding, in that the lowest number of O bonds and the highest number of Ag bonds were confirmed by XPS analysis. Superior antibacterial properties against Bacillus and Escherichia coli, in addition to the widest inhibition zones were exhibited by the Ag-TiO₂ composite with an increased Ag content in a disk diffusion test, the bacterial reduction rate against Staphylococcus aureus and Escherichia coli being 99.9%.

• Journal of Pharmaceutical Investigation
• /
• 제29권1호
• /
• pp.29-36
• /
• 1999

Aceclofenac is an non-steroidal antiinflammatory drug which has been used in the treatment of rheumatoidal rthritis and osteo-arthritis. In order to decrease the gastric ulcerogenic effects and contol the plasma level of aceclofenac, we have developed the transdermal delivery system of aceclofenac plaster, which were formulated employing matrix polymers of acrylates and penetration-enhancers such as $Lauroglycol^{\circledR}$, $Transcutol^{\circledR}$, oleic acid and linoleic acid. Using Franz diffusion cells mounted with a rat skin, transdermal penetration characteristics of the formulations were evaluated by the HPLC assay of aceclofenac and diclofenac, an active metabolite, in the receptor compartment of pH 7.2 phosphate buffered solution. Skin penetration was increased when the content of aceclofenac increased, showing the flux $(J,\;{\mu}g/cm^2/hr)$ of 0.37 and 2.50 for 2% and 6.75% of the content, respectively. The flux$(J,\;{\mu}g/cm^2/hr)$ from plasters made of $Durotak^{\circledR}$ 87-2074, $Durotak^{\circledR}$ 87-2510 and $Durotak^{\circledR}$ 87-2097 were 2.50, 2.77 and 4.39, respectively. $Durotak^{\circledR}$ 87-2074 showed the lowest penetration due to the carboxylic acid group in the polymer, which might form a strong hydrogen bonding with a secondary amine of aceclofenac. Although both $Durotak^{\circledR}$ 87-2510 and $Durotak^{\circledR}$ 87-2097 are amine-resistant adhesives, $Durotak^{\circledR}$ 872510 showed lower penetration than $Durotak^{\circledR}$ 87-2097 because of the hydroxyl group in $Durotak^{\circledR}$ 87-2510, which might form a weak hydrogen bonding with aceclofenac. These results reveal that the functional group in acrylic polymers would greatly affect the release of aceclofenac from the matrix, which is the rate-limiting step in the penetration of aceclofenac through rat skins. The penetration of aceclofenac from plasters using different penetration-enhancers increased in the following order: Transcutol < linoleic acid < oleic acid. And the flux from the plasters containing oleic acid as a penetrationenhancer was 2.22 times greater than that of creams, which suggest that a newly deveolped aceclofenac plaster could be used in the treatment of rheumatoidal arthritis and osteo-arthritis as an advanced transdermal delivery system.

• 마이크로전자및패키징학회지
• /
• 제20권2호
• /
• pp.59-64
• /
• 2013

3차원 적층 패키지를 위한 Cu/Ni/Au/Sn-Ag/Cu 미세 범프의 열처리에 따른 금속간 화합물 성장 거동을 분석하기 위하여 in-situ SEM에서 $135^{\circ}C$, $150^{\circ}C$, $170^{\circ}C$의 온도에서 실시간 열처리 실험을 진행하였다. 실험 결과 금속간 화합물의 성장 거동은 열처리시간이 경과함에 따라 시간의 제곱근에 직선 형태로 증가하였고, 확산에 의한 성장이 지배적인 것을 확인 할 수 있었다. Ni/Au 층의 존재로 인해 Au의 확산으로 복잡한 구조의 금속간 화합물이 생성 된 것을 확인할 수 있다. 활성화 에너지는 $Cu_3Sn$의 경우 0.69eV, $(Cu,Ni,Au)_6Sn_5$경우 0.84 eV로 Ni이 포함된 금속간 화합물이 더 높은 것을 확인 하였으며, 확산 방지층 역할을 하는 Ni층에 의해 금속간 화합물 성장이 억제됨에 따라 신뢰성이 향상 될 것으로 사료된다.

• 한국결정성장학회지
• /
• 제28권5호
• /
• pp.206-210
• /
• 2018

에나멜 기법을 활용하여 Ti6Al4V 합금에 두 종류의 생체활성화 유리를 코팅하였다. 재료간의 열팽창계수 차이에 의한 열응력을 줄이기 위해 재료간의 열팽창계수의 차가 $2{\times}10^{-6}/^{\circ}C$ 정도 되도록 생체활성화 유리 조성을 선정하였다. 열팽창계수의 차이에도 불구하고 Ti6Al4V 합금과 코팅 유리간에 확산결합에 의해 양호한 부착이 형성되었음을 FE-SEM과 EDS 분석으로 확인하였다. 의사체액에 담근 후 코팅 표면에 일반적인 생체활성화 유리와 같은 hydroxycarbonate apatite가 형성됨을 FT-IR로부터 확인하였다.

• 대한화학회지
• /
• 제39권5호
• /
• pp.356-363
• /
• 1995

유기 리간드(디크로로 비스[η-싸이크로 펜타디엔닐])을 가지고 전이금속 4가$(Nb^{4+}와\;Mo^{4+}$와의 착물들에 대한 거동을 UV-vis 분광학적, 자기적, 그리고 전기화학적 방법에 의해 조사하였다. 2 또는 3개의 에너지 흡수띠가 이들 착물들의 스펙트라에 의해 관찰되었다. 결정장 갈라짐 에너지 크기와 스핀 짝지움 에너지 그리고 결합 세기는 착물들의 스펙트라로부터 얻어졌다. 이들은 비편재화이고, 낮은 스핀 상태이며 그리고 강한 결합 세기임을 알았다. 자기쌍극자 모멘트는 상자기성과 반자기성 착물이었다. 착물들의 산화환원 과정은 비수용매속에서 순환 전압전류법에 의해서 조사되었다. Nb-C 착물의 산화환원 반응과정은 일전자의 확산과 반응 전류에 의한 짝-단일 반응이었고 또한 Mo-C 착물에서는 일전자의 반응전류에 의한 짝-단일 반응이었다.

• 대한화학회지
• /
• 제40권1호
• /
• pp.65-71
• /
• 1996

유기 리간드(tris[3-(trifluoromethylhydroxymethymelene-camphorato])와 tris[3-(heptafluoropropylhydroxymethymelene-camphorato])을 Eu(Ⅲ)와의 착물들에 대한 거동을 UV-vis 분광학적, 자기적, 그리고 전기화학적 방법에 의해 조사하였다. 둘 또는 세개의 에너지 흡수 띠가 이들 착물들의 스펙트라에 의해 관찰되었다. 결정장 갈라짐 에너지 크기와 스핀 짝지움 에너지 그리고 결합 세기는 착물들의 스펙트라로부터 얻어졌다. 이들 착물은 전자 배열이 비 편재화이고, 낮은 스핀 상태이며 그리고 강한 결합 세기임을 알았다. 자기 쌍극자 모멘트는 반 자기성 착물로 나타났다. 착물들의 산화.환원 과정은 반 양성자성 용매속에서 순환 전압 전류법에 의해서 조사하였다. 착물들의 산화.환원 과정은 일전자의 확산전류에 의한 단일-짝 반응이었다.

• 대한화학회지
• /
• 제40권10호
• /
• pp.649-655
• /
• 1996

유기 리간드 tetramethylenesulfoxide(TMSO)을 Pd(II)와 Pt(II)의 착물들에 대한 거동을 UV-vis 분광학적, 자기적, 그리고 전기화학적 방법에 의해 조사하였다. 이들 착물들의 스펙트라에서 두 개의 에너지 흡수 띠가 관찰되었다. 결정장 갈라짐 에너지와 스핀 짝지움 에너지 그리고 결합 세기는 착물들의 스펙트라로부터 얻었다. 착물들의 전자적 성질은 비편재화이고, 낮은 스핀 상태임을 알았다. 리간드와 금속들은 강한 결합세기 였다. 이들 착물들은 반자기성 이었다. 착물들의 산화${\cdot}$환원 반응과정은 비수용매 속에서 순환${\cdot}$전압 전류법에 의해 조사하였다. 착물들의 산화${\cdot}$환원 과정은 일전자 일단계 반응이었으며, 확산과 반응 지배적 이었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.156-156
• /
• 2017

In this work, analysis of biocompatible TiO2 oxide multilayer by the XPS depth profiling was researched. the manufacture of the TiO2 barrier-type multilayer was accurately performed in a mixed electrolyte containing HAp, Pd, and Ag nanoparticles. The temperature of the solution was kept at approximatively $32^{\circ}C$ and was regularly rotated by a magnetic stirring rod in order to increase the ionic diffusion rate. The manufactured specimens were carefully analyzed by XPS depth profile to investigate the result of chemical bonding behaviors. From the analysis of chemical states of the TiO2 oxide multilayer using XPS, the peaks are showed with the typical signal of Ti oxide at 459.1 eV and 464.8 eV, due to Ti 2p(3/2) and Ti 2p(1/2), respectively. The Pd-3d peak was split into Pd-3d(5/2) and Pd-3d(3/2)peaks, and shows two bands at 334.7 and 339.9 eV for Pd-3d3 and Pd-3d5, respectively. Also, the peaks of Ag-3d have been investigated. The chemical states consisted of the O-1s, P-2p, and Ti-2p were identified in the forms of PO42- and PO43-. Based on the results of the chemical states, the chemical elements into the TiO2 oxide multilayer were also inferred to be penetrated from the electrolyte during anodic process.The structure characterization of the modified surface were performed by using FE-SEM, and from the result of biological evaluation in simulated body fluid(SBF), the biocompatibility of TiO2 oxide multilayer was effective for bioactive property.