• Bulletin of the Korean Chemical Society
• /
• 제25권10호
• /
• pp.1461-1462
• /
• 2004

• 한국컴퓨터그래픽스학회논문지
• /
• 제20권1호
• /
• pp.13-19
• /
• 2014

본 논문에서는 현실감 있는 렌더링을 위하여 최근 널리 사용되고 있는 영상 기반 조명(image-based lighting)과정을 실시간으로 처리하기위한 기술을 다룬다. 기존의 영상을 광원으로 사용하는 실시간 렌더링 기법에서는 주로 난반사(diffuse reflection)와 거울 면 정반사(mirror-like specular reflection)을 다루는 반면, 본 논문에서는 기존에 컴퓨터 그래픽스 분야에서 널리 사용하던 퐁 반사 모델(Phong reflection model)을 실시간으로 렌더링 하기 위한 방법을 제안한다. 특히 새로운 방법론 보다는 기존의 방법들을 확장하여 게임이나 실시간 미리보기 등의 응용에서 전통적인 방법으로 제작된 표면 속성을 가지는 기하객체를 보다 사실적으로 렌더링하기 위한 실용적인 방법을 제안한다. 난반사의 경우에는 기존의 방법과 유사하게 전처리 과정에서 원본 광원 영상으로부터 난반사를 실시간으로 계산하기 위한 영상을 생성하는 방법을 사용한다. 정반사의 경우에도 유사하게 전처리 과정에서 광택도(shininess)에 따른 반사 맵을 미리 생성하고 이를 물체의 광택도(shininess)에 따라서 보간하는 방법을 사용한다. 이와 같은 방법으로 실시간에 비교적 매우 적은 양의 계산과 적은 텍스처 참조를 통하여 영상 기반 조명을 근사할 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제24권2호
• /
• pp.173-177
• /
• 2003

The present work is focused on the preconcentration of nickel and its determination by means of diffuse reflection spectroscopy. The preconcentration of nickel was carried out by sorption on macroporous aminocarboxylic amphoteric resin ANKB-35. Based on this collector, a method to determine nickel in wastes of heat power industry was worked out using solid-phase spectroscopy. The colored surface compound to be determined was obtained by a preceding nickel sorption on the resin and by subsequent treatment of the concentrate obtained with definite amounts of 1-(2-pyridilazo)-2-naphtol (PAN). The Ni calibration curve is linear in the concentration range of 0.5-20.0 mg/L (sample volume is 200.0 mL) and the detection limit is 0.05 mg/L. The presence of $Cu^{2+},\;Fe^{3+},\;Co^{2+}$ ions as well as macrocomponents of natural water $(Na^+,\;K^+,\;Ca^{2+},\;Mg^{2+})$ do not hinder the solid-phase spectroscopy determination of nickel. The nickel determination by diffuse reflection spectroscopy was carried out in model solutions as well as in solutions obtained after the dissolution of wastes of heat power industry.

• Bulletin of the Korean Chemical Society
• /
• 제25권1호
• /
• pp.79-84
• /
• 2004

The existing technological schemes for processing rhenium-containing raw materials involve the recovery of Re from solutions, which can be effectively achieved by anion exchange method. The application of anion exchange also allows to study rhenium state in aqueous solutions and to develop analytical control methods. The present work is focused on investigation of ion exchange equilibrium in the analytical system Re(VII)-HCl-$SnCl_2$-KSCN-anion exchanger by means of sorption-desorption method as well as by electron, IR- and diffuse reflection spectroscopy. It was shown that rhenium can be quantitatively recovered from this system. It is proposed to use the sorption-spectroscopic method for Re(VII) determination in aqueous solutions. The calibration curve is linear in the concentration range of 0.5-20.0 mg/L (sample volume is 25.0 mL) and the detection limit is 0.05 mg/L. The presence of Mo(VI), Cu(II), Fe(II, III), Ni(II), Zn(II) as well as $K^+,\;Na^+$ do not hinder the solid-phase determination of rhenium. Rhenium (VII) determination by diffuse reflection spectroscopy was carried out in model solutions as well as in samples of river-derived water and in solutions obtained after the dissolution of spent catalysts.

• 한국음향학회지
• /
• 제22권1호
• /
• pp.7-13
• /
• 2003

컴퓨터에 의한 실내음향 예측에 있어 확산반사의 고려는 매우 중요한 요소의 하나로 간주된다. 지난 수년동안 음선추적법과 빔추적법에서 확산반사를 고려하기 위한 방안들이 활발하게 연구되었으나 경면반사를 근본으로 하는 영상법에서는 아직 충분한 연구가 이루어지지 않고 있다. 부분적으로 확산성을 갖는 반사면에서의 음향에너지 반사는 확산반사와 경면반사의 형태로 나누어 볼 수 있으며 반사를 거듭함에 따라 확산-확산, 확산-경면, 경면-확산, 경면-경면의 형태로 반사에너지의 전환이 이루어진다. 본 연구에서는 실내의 벽면을 부분적으로 확산반사의 특성을 갖는 반사면으로 모델링하여 경면반사음은 기존의 영상법으로 계산하고 확산반사음은 라디오시티법을 적용하여 산출하는 확장라디오시티법을 도입하였다. 본 논문에서는 확장라디오시티법의 개념과 이에 따른 고차형태계수의 계산법을 제시하고 고차형태계수가 실내음향 시뮬레이션의 결과에 미치는 영향 등을 분석해 보았다.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.94-101
• /
• 2004

From the Beckmann's reflection model of wave incident, reflected light from a surface is known to have not only specular but also diffuse components. The specular component dominant a surface for a mirror-like surface is distributed on the almost the same area as the spot on the surface, but the diffuse component region dominant f3r a rough surface spreads scattered on the larger areas than the spot. Therefore, statistic parameters from the scattered light distribution are more meaningful in the diffuse region, while the magnitude of rather meaning in the specular region. In usual, there need two sensors to acquire two kinds of information: Photo-detector for light intensity magnitude and image sensor for light intensity distribution. But dual sensor scheme requires a beam splitter usually to feed light to each sensor, and moreover there is not a combination rule to relieve the different sensor characteristics. In this study a new method is proposed for acquisition of the dual information using only an image sensor. Specular region is established on an image area being distinguished from a diffuse component, and laser power is adjusted so that no pixel of the image sensor in the specular region is saturated. Simulation based on the light reflection theory and the experimental results are quite well matched, and thus the proposed method was proved to be very useful for mirror-like surface measurement.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1355-1357
• /
• 2008

Reflection measurements are critical to the evaluation of display performance under ambient illumination conditions. Various hemispherical reflection methods are evaluated for their suitability and robustness across display technologies. The standard integrating sphere method is compared to a sampling sphere apparatus.

• International Journal of Concrete Structures and Materials
• /
• 제7권2호
• /
• pp.119-125
• /
• 2013

Carbonation is a natural ageing process for cement. This study focuses on how the carbonation rate varies with selected hydration times and atmospheric conditions during the early stages of reacting dried cement paste. Diffuse reflection Fourier transform infrared spectroscopy is shown to be a suitable technique to monitor the formation of carbonates in cement. Combined with a previously developed freeze drying technique, carbonation can be studied at specific hydration stages. In ambient air both calcium hydroxide and calcium silicate hydrate (C-S-H) in cement are carbonated. Increased hydration time enhances the carbon dioxide uptake, which indicates that the calcium in the hydration products reacts more easily than the calcium in the clinker phase. In a humid $CO_2$ atmosphere, the carbonation process is so pronounced that it decomposes C-S-H into calcium carbonate and silica. In a moist $N_2$ atmosphere no carbonation occurs, but the sulfate chemistry of the cement seems to be affected due to the formation of ettringite.

• Bulletin of the Korean Chemical Society
• /
• 제14권5호
• /
• pp.641-643
• /
• 1993

• 한국통신학회논문지
• /
• 제33권2A호
• /
• pp.198-203
• /
• 2008

In this paper, we consider the diffuse type of indoor wireless optical communication (WOC) system. To find the channel characteristics of indoor wireless infrared communication system, we investigate the simulation process to get the impulse response of diffuse type and analyze the scenario of the indoor structure which we have built. The simulation results of the impulse response include power ratio and time delay due to bounce times. We get and discuss the receiving power distribution according to six configurations which have different transmitter and receiver positions and reflection coefficients of the indoor structure assumed. The results of this paper are useful to design the indoor wireless optical communication systems.