• Bulletin of the Society of Naval Architects of Korea
• /
• v.18 no.1
• /
• pp.19-27
• /
• 1981

The surge motion of a freely-floating sphere in a regular wave is studied within the framework of a linear potential theory. The fluid is assumed to be perfect and only the steady-state harmonic motion in a water of infinite depth is considered. A velocity potential describing the fluid motion is decomposed into three parts; the incident wave potential, the diffraction potential and the radiation potential. In this paper the diffraction potential and the radiation potential are analysed by using multipole expansion method. Upon calculating pressures over the immersed surface of the sphere, the hydrodynamic forces are evaluated in terms of Froude-Krylov, diffraction, added mass and damping forces as functions of the frequency of the incident wave. Finally the frequency dependence of two pertinent parameters, the amplitude ratio and the phase lag between the motion of the sphere and that of the incident wave is derived from the equation of motion. As for numerical results the general tendency of the present calculation shows good agreement with Kim's work who also treated this problem utilizing the Green's function method.

• Tribology and Lubricants
• /
• v.16 no.1
• /
• pp.9-14
• /
• 2000

It has been cleared in previous author's paper that the fatigue life before the pitting on the rolling contact surface with lubricant are influenced by the wear amount. In this study, the wear type has been clarified when wear amount is extremely large such as the case without lubricant. The test of rolling contact fatigue has been conducted under two different of herzian pressures and three different of slide ratios without lubricant. In addition, residual stress and half-value breadth using X-ray diffraction on worn surface have been measured as well as the wear amount. The results show that the pitting type wear by rolling contact fatigue has not been occurred when the wear amount is considerably large. Thus this type of wear has been deduced by the fatigue wear depending on delamination theory.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.46-52
• /
• 2000

산업사회가 발전하면서 초정밀 분야의 측정기술 또한 시대적 요구에 걸맞게 발전을 거듭하고 있다. 광을 이용한 측정기술에 있어서 보다 작은광 스팟의 구현은 높은 분해능을 위해서 필수 불가결한 조건이며, 광 기록분야에 있어서는 높은 기록밀도를 위해 핵심적인 기술이다. 하지만 스팟의 직경은 광의 회절한계(diffraction limit)에 의한 최소치를 갖는다. 예로서, 측정을 위한 광학 현미경 중 현재 일반적으로 널리 쓰이는 고배율 광학 현미경(high resolution optical microscope)은 측정 대상 표면에 물리적 손상을 주지 않으며, 측정 범위가 크고, 값이 싼 장점이 있다.(중략)

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.267-270
• /
• 2002

LCD is not very expensive and according to the principle that twisted-nematic LCD can modulate by electric signal, lots of researches been developed about many of theory, methods of design and calculating parameters effectively. In 1999 J. A. Davis et ai. proposed the method of deciding upon extraordinary and ordinary axis direction, which is based on Blazing Effect, inspect into changes of diffraction patterns. But in laboratory, it is difficulty to observe 5th or 6th diffraction pattern, and not clear in mathematical. In this paper, illuminating circular polarized beam been to TN LCD (twisted-nematic LCD), we found extraordinary axis direction with inspecting into maximum intensity distribution appeared in the side of analyzer Using Jones matrix method, we endowed with mathematical propriety.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.809-812
• /
• 1999

This paper presents the radio propagation effects in the shadow region due to the presence of obstacle, like building and tree, along the path at the B-WLL band. Using the Uniform Theory of Diffraction(UTD), the total field was obtained as the sum of contributions with diffraction ray from the each obstacle's edge, the direct ray, and the reflected rays from ground. The normalized signal level(in ㏈) is calculated with the parameters of the base station elevation and the distance between obstacle and receiver. This results are used to provide the suitable radio cell planning and coverage prediction in the area of shadow region.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.4
• /
• pp.7-13
• /
• 1992

Diffraction loss occurs when the propagation path is obstructed by mountains and hills between a base station antenna and a moving vehicle antenna in mobile-radio communication. In this paper an approximate mathematical model using Fresnel-Kirchhoff diffraction theory is considered to predict propogation attenuation by natural obstacles with lateral profiles having general shapes. Field tests are conducted using helical and crossed drooping dipole antenna at 820 MHz. The theoretical analysis used in estimating the effects of hills agrees reasonably with experimental data. The results seem to be useful for estimating the level of received power, the minimum allowable input power, the optimum site of base station and consequently, planning terrestrial microwave links.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.1
• /
• pp.15-22
• /
• 2015

In the present paper we report the results of a study into Friction Stir Welds (FSWs) made in 13 mm-thick 12%-Cr steel plates. Based on residual strains obtained by diffraction techniques, eigenstrain analysis was performed using the Eigenstrain Reconstruction Method (ERM), which is a novel methodology for the reconstruction of full-field residual strain and stress distributions within engineering components. Significant eigenstrain distributions were found at around Thermo-Mechanically Affected Zone (TMAZ) where the most severe plastic deformation was occurred. Microstructure analysis was used to elucidate this phenomenon showing that the grain structure in TMAZ was bent and not successfully recrystallised, resulting in severe deformation behaviour. The reconstructed residual strain distributions by the ERM agree well with the experimental results. It was found that the approach based on theory of eigenstrain is a powerful basis for reconstructing the full-field residual strain/stress distributions in engineering components and structures.

• Journal of Magnetics
• /
• v.2 no.2
• /
• pp.42-45
• /
• 1997

The microscopic physical properties of nonstoichiometric garnet EuxFe2-xO3 (x=0.8 and 0.7) have been studied by the methods of X-ray diffraction at room temperature and M ssbauer spectroscopy within the temeperature range of 12-560 K. The X-ray diffraction patterns of the samples show coexistence of dominant garnet and a small portion of unknown crystal phase. But the M ssbauer spectra for the sample of EF08 and EF07 near N el temperature determined to be equally 549$\pm$5K show that there are no any other extra crystal phases within the experimental error. The results of which the temperature dependence of M ssbauer parameters was anlyzed by the spin-wave theory and Debye model are in good agreement with the fact that the sample of EF08 has some vacancies at a-and/or d-sites.

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.496-502
• /
• 2001

We generated a nondiffracting beam and investigated its intensity profile on propagation. We first obtained an annular output beam from Nd:YAG laser with a negative branch unstable ring resonator and, using a 1m focal length lens, we generated a Bessel- Gauss beam. The inner radius of the annular output beam was 2.57 mm and the ring width was 0.145 mm. The intensity profile of the nondiffracting beam did not show any appreciable diffraction up to 33 m distance from the focal lens. This result was compared with the theory.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1697-1702
• /
• 2014

A novel complex [$Zn(phen)(o-AB)_2$] [phen: 1,10-phenanthroline o-AB: o-aminobenzoic acid] was synthesized and characterized by elemental analysis and X-ray diffraction single-crystal analysis. The crystal crystallizes in monoclinic, space group P2(1)/c with $a=7.6397(6){\AA}$, $b=16.8761(18){\AA}$, $c=17.7713(19){\AA}$, ${\alpha}=90^{\circ}$, ${\beta}=98.9570(10)^{\circ}$, ${\gamma}=90^{\circ}$, $V=2.2633(4)nm^3$, Z = 4, F(000) = 1064, S = 1.058, $Dc=1.520g{\cdot}cm^{-3}$, $R_1=0.0412$, $wR_2=0.0948$, ${\mu}=1.128mm^{-1}$. The Zn(II) is six coordinated by two nitrogen and four oxygen atoms from the 1,10-phenanthroline and o-aminobenzoic acid to furnish a distorted octahedron geometry. The complex exhibits intense fluorescence at room temperature. Theoretical studies of the title complex were carried out by density functional theory (DFT) B3LYP method. CCDC: 898291.