• Title/Summary/Keyword: Difficult-to-Material

Search Result 1,852, Processing Time 0.038 seconds

The Connection Analysis on the Areas of Clothing and Textiles in Practical Arts, Technology and Home Economics, and the Science of Home Economics Courses (초등 실과, 기술가정, 가정과학 교과 내 '의생활' 영역의 연계성 분석)

  • Lee, Eun-Joo;Shin, Hye-Won
    • Journal of Korean Home Economics Education Association
    • /
    • v.19 no.1 s.43
    • /
    • pp.1-14
    • /
    • 2007
  • This study aimed to analyze the contents of clothing and textile areas in practical arts, technology and home economics, and science of home economics courses, and the degrees of vertical connections among them. Totally 21 textbooks were chosen for this study, which consist of fifth and sixth grade practical arts textbooks(one from each grade), sixteen technology and home economics textbooks(eight from each eighth and tenth grade), and three high school science of home economics textbooks. In order to analyze systematically the degrees of vertical connections, clothing and textile areas were divided into 6 large sections, which were subdivided into 48 specific categories(contents) by content analysis. The method of connection analysis was based on development(constant continuity and sequence), repetition (continuity without considering sequence), gap(sequence without considering the continuity of curriculum), and reduction(the lack of both continuity and sequence). The connection analysis were done in 48 categories separatively. In the sections of clothing attire and clothing management, the most categories(46.1% and 44.5%) were evaluated as having connections of reductions. No category was analyzed as development in the section of clothing planning and the most categories(83.3%) had connections of repetitions. In the clothing material section showed to be the section with the most in-depth and expanded content compared to the previous educational levels, with developed categories of 50%. The most degree of connection in the clothing and textile areas of practical arts, technology and home economics, and science of home economics subjects was the development at 29.2%, followed by repetition at 25%, reduction at 25%, and finally gap at 20.8%. Developed categories were relatively more than repetitive, reduced, or gap contents. However, as the connection between grades was not highly outstanding, it was difficult to say that the connection of the curriculum was adequately distributed according to the school grades.

  • PDF

Studies on the soybean varieties in Korea. -IV relationships between the seed yields and some characteristics on the several sowing dates- (대두의 품종에 관한 연구 -제4보 파종기별 수량과 제특성과의 관계-)

  • Kwon-Yawl Chang
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.2
    • /
    • pp.30-37
    • /
    • 1964
  • Experiments were carried out to clarify the relationships between seed yields and some ecological characteristics, seed yields and some morphological characteristics, and the relationships among the varietal yields on the several sowing plots when grown under different climatic conditions. Twenty-four soybean varieties were used as the material, selected at random from 138 varieties which were cultivated the year before. These varieties were grown in the Experimental Farm, Chinju Agricultural College, Kyung Sang Namdo, Korea, and seed sowing was conducted at 5 times, from April to July, in 1962 and 1963. The results obtained are summarized as follows: 1. Correlations between seed yields and some ecological characteristics on the sowing date bases are shown in Table 1. Among some ecological characteristics, it was observed that there wert close relationships between seed yields and days to flowering, and between seed yields and the total growing length, except on the late sowing, i.e. July sowing plots, However, there was no clear correlation between seed yields and durations of flowering, and between seed yields and days from flowering to maturity. 2. Correlations between seed yields and some morphological characteristics on the sowing date bases are shown in Table 2. From this table, it was also observed that there were some close relationships between seed yields and branch number for plant, stem diameter, plant weight, pod number per plant, and grain number per plant, but there was no clear relationship between seed yields and stem length, and between seed yields and 100 grain weight, on every sowing plot. 3. Relations between varietal yields and the sowing dates are shown in Table 3. Our leading varieties such as Ulsan, Sangdoo, Changdan Backmok, Iksan, Haman, Barchongdeo, and Anion Daerip, which belong to the maturity groups of IV, V, and VI, have been significantly high in yield at each sowing date plot, but the extreme early varieties, that frequently are damaged by insects, moisture and diseases, and the extreme late varieties, that frequently are caught by frost suffering reduced yield, are showed a lower yield than the others. However, extreme early varieties, for instance, Black Hawk, an American variety, and Chung Buk Baek, a Korean early variety, showed high productivity on the late sowing, June and July sowing plots, and Do san No. 6, which is late Japanese variety, showed a high yield on the extreme early sowing, i.e. April sowing plots. 4. Relations between seed yields and the sowing dates on the varietal bases are shown in Table 4. It was observed that, the early varieties did not differ much in yields at the various sowing dates while the yields of late varieties decreased progressively with subsequent dates. However, the extreme late varieties, such as Tamanishiki, that frequently are caught by frost suffering reduced yield, may be difficult to harvest at this location. The results in these experiments showed that in most cases maximum yields were obtained when leading varieties, which are medium or late varieties, were shown in Mid-May, and progressively lower yields were produced from June and July sowings. On the other hand, the late sowings of the early varieties, such as Black Hawk and Chung Buk Baek, in these experiments showed favorable yields compared with the others. From these results, we can predict that our local medium or late varieties produce higher yields at this location than was produced by early varieties in most of the sowing dates, especially the May sowing, and early varieties such as Black Hawk and Chung Buk Baek should be used in the late sowing, June sowing time.

  • PDF

Studies on the soybean varieties in Korea -III. Relationships between the ecotypes and various characteristics- (대두의 품종에 관한 연구 -제3보 생태형과 제 특성간 그리고 수량과 제 특성간의 관계-)

  • Kwon-Yawl Chang
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.2
    • /
    • pp.27-29
    • /
    • 1964
  • Experiments were carried out to clarify the relationships between seed yields and some ecological characteristics, seed yields and some morphological characteristics, and the relationships among the varietal yields on the several sowing plots when grown under different climatic conditions. Twenty-four soybean varieties were used as the material, selected at random from 138 varieties which were cultivated the year before. These varieties were grown in the Experimental Farm, Chinju Agricultural College, Kyung Sang Namdo, Korea, and seed sowing was conducted at 5 times, from April to July, in 1962 and 1963. The results obtained are summarized as follows: 1. Correlations between seed yields and some ecological characteristics on the sowing date bases are shown in Table 1. Among some ecological characteristics, it was observed that there wert close relationships between seed yields and days to flowering, and between seed yields and the total growing length, except on the late sowing, i.e. July sowing plots, However, there was no clear correlation between seed yields and durations of flowering, and between seed yields and days from flowering to maturity. 2. Correlations between seed yields and some morphological characteristics on the sowing date bases are shown in Table 2. From this table, it was also observed that there were some close relationships between seed yields and branch number for plant, stem diameter, plant weight, pod number per plant, and grain number per plant, but there was no clear relationship between seed yields and stem length, and between seed yields and 100 grain weight, on every sowing plot. 3. Relations between varietal yields and the sowing dates are shown in Table 3. Our leading varieties such as Ulsan, Sangdoo, Changdan Backmok, Iksan, Haman, Barchongdeo, and Anion Daerip, which belong to the maturity groups of IV, V, and VI, have been significantly high in yield at each sowing date plot, but the extreme early varieties, that frequently are damaged by insects, moisture and diseases, and the extreme late varieties, that frequently are caught by frost suffering reduced yield, are showed a lower yield than the others. However, extreme early varieties, for instance, Black Hawk, an American variety, and Chung Buk Baek, a Korean early variety, showed high productivity on the late sowing, June and July sowing plots, and Do san No. 6, which is late Japanese variety, showed a high yield on the extreme early sowing, i.e. April sowing plots. 4. Relations between seed yields and the sowing dates on the varietal bases are shown in Table 4. It was observed that, the early varieties did not differ much in yields at the various sowing dates while the yields of late varieties decreased progressively with subsequent dates. However, the extreme late varieties, such as Tamanishiki, that frequently are caught by frost suffering reduced yield, may be difficult to harvest at this location. The results in these experiments showed that in most cases maximum yields were obtained when leading varieties, which are medium or late varieties, were shown in Mid-May, and progressively lower yields were produced from June and July sowings. On the other hand, the late sowings of the early varieties, such as Black Hawk and Chung Buk Baek, in these experiments showed favorable yields compared with the others. From these results, we can predict that our local medium or late varieties produce higher yields at this location than was produced by early varieties in most of the sowing dates, especially the May sowing, and early varieties such as Black Hawk and Chung Buk Baek should be used in the late sowing, June sowing time.

  • PDF

Synthesis and Electrochemical Performance of Ni-rich NCM Cathode Materials for Lithium-Ion Batteries (리튬이온전지 양극활물질 Ni-rich NCM의 합성과 전기화학적 특성)

  • Kim, Soo Yeon;Choi, Seung-Hyun;Lee, Eun Joo;Kim, Jeom-Soo
    • Journal of the Korean Electrochemical Society
    • /
    • v.20 no.4
    • /
    • pp.67-74
    • /
    • 2017
  • Layered Ni-rich NCM cathode materials $Li[Ni_xCo_{(1-x)/2}Mn_{(1-x)/2}]O_2$ ($x{\geq}0.6$) have advantages of high energy density and cost competitive over $LiCoO_2$. The discharge capacity of NCM increases proportionally to the Ni contents. However, there is a problem that it is difficult to realize the stable electrochemical performance due to cation mixing. In this study, synthesis conditions for the layered Ni-rich NCMs are investigated to achieve deliver the ones having good electrochemical performances. Synthesis parameters are atmosphere, lithium source, synthesis time, synthesis temperature and Li/M (M=transition metal) ratio. The degree of cation mixing gets worse as the Ni content is increased from $Li[Ni_{0.6}Co_{0.2}Mn_{0.2}]O_2$ (NCM6) to $Li[Ni_{0.8}Co_{0.1}Mn_{0.1}]O_2$ (NCM8). It is confirmed that higher level of cation mixing affects negatively on the electrochemical performance of NCMs. Optimum synthesis conditions are explored for NCMx (x=6, 7, 8) in order to reduce the cation mixing. Under optimized conditions for three representative NCMx, a high initial discharge capacity and a good cycle life are obtained for $180mAh{\cdot}g^{-1}$, 96.2% (50 cycle) in NCM6, $187mAh{\cdot}g^{-1}$, 94.7% (50 cycle) in NCM7, and $201mAh{\cdot}g^{-1}$, 92.7% (50 cycle) in NCM8, respectively.

Analysis of the Causes of and Risk Factors for Mortality in the Surgical Repair of Interrupted Aortic Arch (대동맥궁 단절증 수술 사망 원인과 위험인자 분석)

  • Kwak Jae Gun;Ban Ji Eun;Kim Woong-Han;Jin Sung Hoon;Kim Yong Jin;Rho Joon Ryang;Bae Eun Jung;Noh Chung Il;Yun Yong Soo;Lee Jeong Ryul
    • Journal of Chest Surgery
    • /
    • v.39 no.2 s.259
    • /
    • pp.99-105
    • /
    • 2006
  • Background: Interrupted aortic arch is a rare congenital heart anomaly which still shows high surgical mortality. In this study, we investigated the causes of and the risk factors for mortality to improve the surgical outcomes for this difficult disease entity. Material and Method: From 1984 to 2004, 42 patients diagnosed as IAA were reviewed retrospectively. Age, body weight at operation, preoperative diagnosis, preoperative PGE1 requirement, type of interrupted aortic arch, degree of left ventricular outflow stenosis, CPB time, and ACC time were the possible risk factors for mortality. Result: There were .14 hospital deaths. Preoperative use of PGE1, need for circulartory assist and aortic cross clamp time proved to be positive risk factors for mortality on univariate analysis. Preoperative left ventricular outflow stenosis was considered a risk factor for mortality but it did not show statistical significance (p-value=0.61). Causes of death included hypoxia due to pulmonary banding, left ventricular outtract stenosis, infection, mitral valve regurgitation, long cardiopulmonary bypass time and failure of coronary transfer failure in TGA patients. Conclusion: In this study, we demonstrated that surgical mortality is still high due to the risk factors including preoperative status and long operative time. However preoperative subaortic dimension was not related statistically to operative death statistically. Adequate preoperative management and short operation time are mandatory for better survival outcome.

A Study on the Influence of Finishing and Polishing Methods on the Gap between Denture Base Resin and Soft Liner (의치의 마무리와 연마법이 의치상 레진과 연성 이장재 간의 공극에 미치는 영향에 관한 연구)

  • Jung, Seung-Hwan;Lee, Joon-Seok
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.24 no.4
    • /
    • pp.325-335
    • /
    • 2008
  • The junction between resilient denture liner and the denture base is difficult to finish and polish due to difference of the physical property of the materials. Gaps tend to be formed during finishing and polishing procedures. The purpose of this study was measuring the width of junctional gap between $Molloplast-B^{(R)}$ and denture base material after finishing and polishing procedure, and evaluating the effect of method and direction on gap width. $Molloplast-B^{(R)}$ was processed (according to the manufacturer's instruction) against Lucitone $199^{(R)}$ acrylic resin. 50 specimens were fabricated with a raised center section. All of specimens were examined and photographed with a stereoscopic microscope(x120), and the largest gap along the junction of $Molloplast-B^{(R)}$ and acrylic resin on each specimen was measured. One-way analysis of variance(ANOVA) and independent t-test at 95% confidence level were used to analyze the data and to compare groups. The results of this study were as follows. In comparison with finishing tools, the gap width was the largest in $Molloplast^{(R)}$-Cutter and the smallest in FSQ-cross cut bur. There was statistically significant difference between FSQ-cross cut bur and $Molloplast^{(R)}$-Cutter(p<0.05). There was no significant difference in gap width between the direction of polishing. The mean value of gap width was the smallest in case of no polishing, and the largest in case of polishing with pumice & tin oxide. There was statistically significant difference between pumice and pumice & tin oxide. From the results, it is concluded that the use of $Molloplast^{(R)}$-Cutter in clinic need serious consideration even though it has good cutting ability. Further careful study is needed for finishing and polishing methods for decreasing gap width in junction of two materials.

A Study on the Sketch of Trikaya Banner Painting in the Suta-sa Temple (수타사 삼신불괘불도(三身佛掛佛圖) 초본(草本) 연구)

  • Kim, Chang Kyun
    • Korean Journal of Heritage: History & Science
    • /
    • v.42 no.4
    • /
    • pp.112-131
    • /
    • 2009
  • The Trikaya Banner Painting in the Suta-sa Temple at Hongcheon-gun, Gangwon-do draws attention as it was painted not on flax but on paper, and used the water color painting technique on the sketch rather than the deep color painting technique, which is most common in Buddhist paintings created during the Chosun Dynasty. Nevertheless, there is not any information on the creation of the Trikaya Banner Painting in the painting record on the painting, in Sutasasajeok(壽陀寺史蹟), or in Sutasagogirok(壽陀寺古記錄), so it is uncertain when the painting was created. Furthermore, because it was not drawn by the deep color painting technique, it has been difficult to compare it with other banner paintings. For these reasons, the Trikaya Banner Painting has been studied little except brief introduction. In recent preservation treatment that removed multiple-layered paper from the back of the painting, however, an inked inscription written on Korean paper 118cm high and 87.5cm wide was discovered on the back. It is a kind of placard notifying a number of acts prohibited in order to follow Buddha's teachings correctly, and was found to have been written on April 15, 1690. The inked inscription is a very valuable material for estimating the creation date of the Suta-sa Trikaya Banner Painting, and provides crucial clues for approaching the contents and nature of the painting more precisely. When the image, form, and style of the Suta-sa Trikaya Banner Painting were examined and its creation date was estimated based on the inked inscription, first, the painting is presumed to have been created in around 1690 as suggested by 'the placard' attached on the back instead of a painting record. Second, the painting is highly likely to be the first standing Trikaya banner painting showing the basic icons of Trikaya banner paintings in the Chosun Dynasty since the Trikaya Banner Painting in the Gap-sa Temple in Gongju (1650). Furthermore, considering the shape of the Trikaya in the painting, screen composition, background treatment, solemn and affectionate facial expression, harmonious and adequate body proportion, etc., the painting is believed to have had a considerable influence not only on Trikaya banner paintings of similar style in the 18thcentury but also on deep-color Trikaya banner paintings in the 19thcentury. Third, although the Suta-sa Trikaya Banner Painting is not acompleted work but a sketch, it exhibits the typical water color painting technique in which the strokes are clearly visible. Thus, it is considered highly valuable in understanding and analyzing stroke styles and in studying the history of Buddhist paintings. As there are not many extant banner paintings of the same style in form and expression technique as the Suta-sa Temple Trikaya Banner Painting, this study could not make thorough comparative analysis of the work, but still it is meaningful in that it laid the ground for research on standing Trikaya banner paintings in the 18thand 19thcenturies in the Chosun Dynasty.

A Study on the Original Landscape for the Restoration and Maintenance of Buyongjeong and Juhamnu Areas in Changdeokgung Palace (창덕궁 부용정과 주합루 권역의 복원정비를 위한 원형 경관 고찰)

  • Oh, Jun-Young;Yang, Ki-Cheol
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.39 no.4
    • /
    • pp.24-37
    • /
    • 2021
  • This study was conducted to newly examine the original landscape of Buyongjeong(芙蓉亭) and Juhamnu(宙合樓) areas in Changdeokgung Palace(昌德宮), focusing on the modern period including the Korean Empire, and to derive useful research results for restoration and maintenance in the future. The study results can be summarized as follows. First, the artificial island in Buyongji(芙蓉池) was originally made up of a straight layer using well-trimmed processed stone. However, during the maintenance work in the 1960s and 1970s, the artificial island in Buyongji was transformed into a mixture of natural and processed stones. The handrail installed on the upper part of the artificial island in Buyongji is a unique facility that is hard to find similar cases. The handrail existed even during the Korean Empire, but was completely destroyed during the Japanese colonial period. Second, Chwibyeong(翠屛), which is currently located on the left and right of Eosumun(魚水門), is the result of a reproduction based on Northern bamboo in 2008. Although there is a view that sees the plant material of Eosumun Chwibyeong as Rigid-branch yew, the specific species is still vague. Looking at the related data and circumstances from various angles, at least in the modern era, it is highly probable that the Eosumun Chwibyeong was made of Chinese juniper like Donggwanwangmyo Shrine(東關王廟) and Guncheongung(乾淸宮) in Gyeongbokgung Palace(景福宮). Third, the backyard of Juhamnu was a space with no dense trees on top of a stone staircase-shaped structure. The stone stairway in the backyard of Juhamnu was maintained in a relatively open form, and it also functioned as a space to pass through the surrounding buildings. However, as large-scale planting work was carried out in the late 1980s, the backyard of Juhamnu was maintained in the same shape as a Terraced Flower Bed, and it was transformed into a closed space where many flowering plants were planted. Fourth, Yeonghwadang Namhaenggak(暎花堂 南行閣), which had a library function like Gyujanggak(奎章閣) and Gaeyuwa(皆有窩), was destroyed in the late 1900s and was difficult to understand in its original form. Based on modern photographs and sketch materials, this study confirmed the arrangement axis of Yeonghwadang Namhaenggak, and confirmed the shape and design features of the building. In addition, an estimated restoration map referring to 「Donggwoldo(東闕圖)」 and 「Donggwoldohyung(東闕圓形)」 was presented for the construction of basic data.

Establishment of the Heart Failure Model by Coronary Artery Ligation in Sheep (양에서 관상동맥 결찰에 의한 심부전 모델의 확립)

  • 나찬영;홍장수;박정준;김원곤;강문철;서정욱
    • Journal of Chest Surgery
    • /
    • v.35 no.1
    • /
    • pp.1-10
    • /
    • 2002
  • Background: Despite the relatively high mortality rates in the chronic heart failure model induced by coronary artery ligation are relatively high, this model has been a subject of continuos research because of its clinical correlation. Chronic heart failure model of large-sized animals is very useful to analyse mechanical or biological effects on circulatory system which is difficult in small-sized animals. The purpose of this study is to establish the heart failure model by coronary artery ligation in sheep. Material and Method: Among 9 Corridale sheep, the homonymous artery and the diagonal branch were ligated simultaneously in 2 sheep and remaining 7 sheep were assigned to successive ligation of both arteries at an interval of 1 hour. Both coronary arteries were ligated from the point 40% proximal to the apex of the heart. Hemodynamic and echocardiographic parameters were analyzed before the ligation of the coronary artery, after the ligation of the homonymous artery, and after additional ligation of the diagonal branch. The experimental animals were sacrificed after 2 or 3 months of growth and histopathologic studies were performed Result: Immediate postoperative death occurred in the 2 sheep that had received simultaneous ligation of the homonymous artery and diagonal branch. On the other hand, all the 7 sheep that were lifated in succession were survived up to 3 months. Arterial pressure was sifnificantly decreased immediately after ligation of the homonymous artery(p<0.05), and the cardiac output was decreased and pulmonary capillary wedge pressure was increased after further ligation of the diagonal branch(p<0.05). Central venous pressure, pulmonary artery pressure, pulmonary capillary wedge pressure, left ventricular end-diastolic dimension and end-systolic dimension were markedly increased 3 months after ligation of coronary arteries. Anteroseptal akinesia or dyskinesia was developed after the ligation of coronary arteries. Histopathologic study revealed we]1-demarcated ischemic area of fibrosis. Conclusion: Using methods of successive ligation of the homonymous artery and diagonal branch, chronic heart failure model could be reliably established in sheep.

COMPARATIVE STUDY ON THE SHEAR BOND STRENGTH OF ALL-IN-ONE DENTIN BONDING SYSTEM APPLIED TO PRIMARY TEETH (유치에 적용된 All-in-One 상아질 접착 시스템의 전단강도에 관한 비교연구)

  • Kim, Dong-Cheol;Kim, Jong-Soo;Yoo, Seung-Hoon
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.34 no.4
    • /
    • pp.560-568
    • /
    • 2007
  • This study was performed to compare the shear bond strength of primary enamel & dentin treated by AQ Bond $Plus^{TM}$ and G $Bond^{TM}$, recently developed 6th generation dentin bonding system, to that of Single $Bond^{TM}$ being widely used. Also by observing the resin tag under scanning electron microscope, Resin tags of each material were also observed under scanning electron microscope and compared to one another. The possibility of clinical application of All-in-One system which has an advantage to reduce chair-time for children with difficult behavior pattern was evaluated. The results obtained are as follows: 1. No statistically significant difference between groups was found in shear bond strength of primary enamel. 2. In primary dentin, the shear bond strength of AQ Bond $Plus^{TM}$ was $1.15\;{\pm}\;0.37\;MPa$, G $Bond^{TM}$ was $1.69\;{\pm}\;0.74\;MPa$ and Single $Bond^{TM}$ was $0.56\;{\pm}\;0.11\;MPa$. There were no statistical difference between AQ Bond $Plus^{TM}$ and G $Bond^{TM}$ and between G $Bond^{TM}$ and Single $Bond^{TM}$, whereas statistically significant difference was found between AQ Bond $Plus^{TM}$ and Single $Bond^{TM}$. 3. Under scanning electron microscope, resin tags observed in AQ Bond $Plus^{TM}$ and G $Bond^{TM}$ were very weak and tangled while strong and thick tags were shown with many lateral branches in Single $Bond^{TM}$. The result of the present study coupled with the advantages of less working time over the previous generation suggests that All-in-One system might be effectively used in adhesive dental procedures for primary teeth.

  • PDF