• Advanced Composite Materials
• /
• 제18권2호
• /
• pp.95-103
• /
• 2009

Composites can be designed to have special properties, and even such properties that are difficult to find in nature. We propose a simple approach to realize negative expansion upon wetting, i.e., contraction upon wetting, using swelling materials. The key parameters in one-dimensional case are investigated, and the possible configurations for two and three-dimensional cases are presented. The feasibility is demonstrated through a simple test.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.556-556
• /
• 2001

The application of the laser to the tooth hard tissue started from the removal of carious dentin with the laser performed by Goldman in 1964. With the development of the laser technology, the laser treatment with less descomfort such as pain, vibration, and noise, etc. has been attempted. Since it is difficult to give a suitable form for inlay restoration to a cavity prepared with laser, it has to be restored with adhesive resinous materials. However, various evaluation of adhesive properties of the resinous materials to lased tooth surface on the various conditions such as adgerent, irradiation condition, procedure of bond test, and adhesive materials used, etc. have been reported.(omitted)

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권1호
• /
• pp.32-38
• /
• 2024

공동주택의 경우 사람의 실거주 및 코어시험 시 일어나는 분진 및 소음 등으로 인하여 비파괴검사를 진행하기 어려워 공용부 및 지하 주차장에서 매번 점검이 이루어지며, 저가 수주로 인한 콘크리트 면의 실험이 아닌 마감재 위에서 실험을 진행하여 부실점검이 발생할 수 밖에 없는 실정이다. 또한 강도 추정을 위한 제안식들은 시험조건과 환경의 차이에 따라 변동폭이 크고, 동일한 측정값을 나타내더라도 제안식 마다 그 편차가 커 정확한 강도 추정이 어려워 사용에 어려움을 겪고 있는 실정이다. 이에 공동주택에 주로 사용되는 마감재를 선정하여 마감재를 제거하지 않고 직접 마감재에 비파괴검사법을 활용하여 마감재 종류에 따른 콘크리트 압축강도 비교 평가를 하고자 한다. 마감재 종류에 따른 초음파속도법을 이용한 콘크리트 추정압축강도 신뢰도 평과 결과는 다음과 같다. 초음파속도법을 통해 도출된 추정압축강도와 압축강도의 오차율은 21.83% ~58.89%로 광범위한 변동폭을 보이며. 추정압축강도에 대한 마감재 유무의 영향은 미비한 것으로 나타났다. 이에 마감재 종류를 더 선정하여 마감재 유무에 따른 초음파속도법 연구가 필요하며 신뢰도를 높일 수 있는 추정기법 연구가 필요하다.

• The Journal of Advanced Prosthodontics
• /
• 제9권6호
• /
• pp.486-495
• /
• 2017

The wide use of chairside CAD/CAM restorations has increased the diversity of the restorative material. For the practitioner, the selection of the appropriate material is difficult amongst the variety offered by the market. Information on the characteristics of the products can be difficult to assess due to the lack of up-to-date classification and the lack of reliability of manufacturer's advertising. The purpose of this article is to structure the data on restorative materials provided by various sources in order for the practitioner to choose the product most suited to the clinical situation. The objective is to classify chairside CAD/CAM materials and to define their characteristics and indications.

• Journal of Construction Engineering and Project Management
• /
• 제1권1호
• /
• pp.31-36
• /
• 2011

Construction materials usually constitute a major portion of the total cost in a building construction project. Materials management Is made problematic by materials shortages, delays in supply, price fluctuations, damage and wastage, and lack of storage space. Despite the potential benefit of ICT, convincing construction organisations to embrace its use and implementation has proved a difficult task. This study seeks to identify the implementation of ICT for materials management processes in construction projects. The findings from the case studies reveal that the implementation of ICT in the materials management processes for construction projects in Malaysia Is at early stage. Microsoft Excel Spreadsheet and handheld devices are found to be the common ICT tools adopted in the materials management processes. The main barrier is found to be the cost involvement at the initial stage or overall implementation of ICT in the materials management processes. Finally, this paper concludes the finding from interviews towards the ICT implementation of materials management in the construction projects.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.1-6
• /
• 2008

Machine operator and quality are affected by chip during cutting process to product machine parts. This paper presents a study of the influence of cutting conditions on the surface roughness obtained by turning using Taguchi method for safety of turning operator. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of its low thermal conductivity and chemical reactivity. Therefore titanium alloys are known as difficult-to materials. An orthogonal array, the signal-to-noise ratio, the analysis of variance are employed to investigate the cutting characteristics of implant material bars using tungsten carbide cutting tools of throwaway type. Also Experimental results by orthogonal array are compared with optimal condition to evaluate advanced reliability. Required simulations and experiments are performed, and the results are investigated.

• 공학교육연구
• /
• 제22권2호
• /
• pp.55-60
• /
• 2019

Colleges of technology in Japan are characterized by specialized education starting from the first grades aged fifteen, making it particularly important to provide motivation for specialized subjects. The most difficult thing for teachers in the technical college is giving the motivation to a professional education to the lower grades who don't know the technology and engineering. Teachers tried to use and make a suitable example or an education material for their lecture. The generation gap with students makes it difficult for teachers to use examples of objects that students are actually familiar with in their daily life. To compensate for the generation gap with students, we asserted that education for lower grades should adopt the perspectives of students in higher grades. The relative closeness in age of lower and higher grades helps reduce the generation gap with students, which is advantageous in that teachers can share the perspectives of students.

• 한국분말재료학회지
• /
• 제29권2호
• /
• pp.152-158
• /
• 2022

Thermoelectric materials can reversely convert heat and electricity into each other; therefore, they can be very useful for energy harvesting from heat waste. Among many thermoelectrical materials, SnSe exhibits outstanding thermoelectric performance along the particular direction of a single crystal. However, single-crystal SnSe has poor mechanical properties and thus it is difficult to apply for mass production. Therefore, polycrystalline SnSe materials may be used to replace single-crystal SnSe by overcoming its inferior thermoelectric performance owing to surface oxidation. Considerable efforts are currently focused on enhancing the thermoelectric performance of polycrystalline SnSe. In this study, we briefly review various enhancement methods for SnSe thermoelectric materials, including doping, texturing, and nano-structuring. Finally, we discuss the future prospects of SnSe thermoelectric powder materials.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.266-269
• /
• 2002

Research during the past several years has established the effectiveness of acoustic emission (AE)-based sensing methodologies for machine condition analysis and process. AE has been proposed and evaluated for a variety of sensing tasks as well as for use as a technique for quantitative studies of manufacturing process. STD11 has been known as difficult-to-cut materials. For this study, the micro-grooving machine was developed. The experiments were performed using diamond blade and CBN blade f3r machining STD11. Evaluating the machining conditions, frequency spectrum analysis of acoustic emission (AE) signals according to each conditions were applied.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.274-277
• /
• 2000

SHS is recognized as an attractive process for producing high-temperature, hard materials that difficult and/or expensive to produce by conventional fabrication methods. The goal of this work is to investigate new express technology of doped Fe alloys materials. The high density, homogeneity of the components, and the low processing temperatures achieved and minimum synthesis time are all of paramount importance in fabricating Fe alloys as functional materials.