• Journal of the Korean Geotechnical Society
• /
• v.38 no.4
• /
• pp.33-45
• /
• 2022

A series of model tests were performed in this study to demonstrate the clogging mechanism created during the installation of a compaction pile to improve soft ground. The application of an air-jet to extrude sand or aggregates from a casing during the installation of a compaction pile imposes a remarkably high-pressure difference between the composite soil layers of clay and sand (or aggregates), resulting in severe clogging. Therefore, a one-dimensional testing system was developed to simulate composite soil layers consisting of clay and sand (or aggregates) and to apply a high-pressure differential at both boundaries, thus replicating the extrusion process used in compaction pile installation. Herein, the performance of two construction materials for compaction piles of crushed stone and grading-controlled aggregates was compared. A series of one-dimensional model tests were performed under multiple pressure settings, with clogging depth and permeability measured in each case. Results indicate that, blinding clogging mechanisms and blocking defined by previous studies were observed for crushed stone, and a new mechanism of "infiltration" was revealed and defined. Whereas, the controlled aggregates performed excellently against clogging because only blinding was observed.

• Journal of the Korea Convergence Society
• /
• v.13 no.2
• /
• pp.67-75
• /
• 2022

The purpose of this study is to present an appropriate management plan as a supplement to the scientific evidence of the currently operated distancing system for preventing COVID-19. The currently being used mathematical models are expressed as simultaneous ordinary differential equations, there is a problem in that it is difficult to use them for the management of entry and exit of small business owners. In order to supplement this point, in this paper, a method for quantitatively expressing the risk of infection by people who gather is presented in consideration of the allowable risk given to the gathering space, the basic infection reproduction index, and the risk reduction rate due to vaccination. A simple quantitative model was developed that manages the probability of infection in a probabilistic level according to a set of visitors by considering both the degree of infection risk according to the vaccination status (non-vaccinated, primary inoculation, and complete vaccination) and the epidemic status of the virus. In a given example using the model, the risk was reduced to 55% when 20% of non-vaccinated people were converted to full vaccination. It was suggested that management in terms of quarantine can obtain a greater effect than medical treatment. Based on this, a generalized model that can be applied to various situations in consideration of the type of vaccination and the degree of occurrence of confirmed cases was also presented. This model can be used to manage the total risk of people gathered at a certain space in a real time, by calculating individual risk according to the type of vaccine, the degree of inoculation, and the lapse of time after inoculation.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.525-529
• /
• 2022

In the eLoran system, the Loran Data Channel (LDC) is used to provide precise timing and positioning. The LDC message can be modulated with the Eurofix method, which modulates the transmission time of the 3rd-8th pulse not used for navigation, and the 9th pulse method, which modulates data using the 9th additional pulse after the existing 8 Loran pulses. In this paper, we analyzed the reception performance of the LDC message transmitted from the eLoran transmitter according to the modulation method. The eLoran testbed transmitter in Incheon was set to transmit LDC messages simultaneously with the 9th pulse modulation method and the Eurofix modulation method. Then, the LDC messages stored in the databases of the eLoran differential stations in Incheon and Pyeongtaek were analyzed in terms of the message reception rate according to the modulation method. Using the navigation aid management ship Inseong No. 1, the range of LDC message reception of actual sea users near Incheon Port was also analyzed. The results of this study are expected to be utilized in the full operational capability service after the eLoran pilot service.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.995-1003
• /
• 2021

Coastal compound disasters are becoming more extreme and more frequent due to climate change. Thus, appropriate and systematic disaster management is necessary to reduce potential losses. One solution to this is the creation of a coastal compound disaster management area. However, Korea's "Countermeasures against Natural Disasters Act" needs to be reformed to introduce this coastal compound disaster management area. In this study, we tried to find the appropriate direction for reforming the Act in order to establish a basis for implementing regulations on the Coastal Compound Disaster Management Area with regard to three aspects: science-based management, cooperative management, and adaptive management. The study was on the premise that the system would be operated based on the provisions of the "Countermeasures against Natural Disasters Act". Consequently for effective science-based management, it is necessary to introduce a disaster risk assessment framework. Based on the results obtained through the implementation of this framework, the management areas should be set with differential measures. Next, cooperation among the various ministries is essential to successfully respond to disasters. This study recommends the establishment of an advisory council composed of the related government departments as a pragmatic solution. Finally, in terms of adaptive management, we found that parallelly utilizing non-structural measures could compensate for the limitations of structural measures.

• Journal of Service Research and Studies
• /
• v.13 no.3
• /
• pp.1-19
• /
• 2023

Despite the growing importance of video-based social media content, such as vlogs, as a marketing tool in the travel industry, there is limited research on the characteristics that enhance engagement among potential travelers. This study explores the influence of emotional valence in YouTube travel content on viewer engagement, specifically likes and comments. We analyzed 4,619 travel-related YouTube videos from eight popular tourist cities. Using negative binomial regression analysis, we found that both positive and negative emotions significantly influence the number of likes received. Videos with higher positive emotions as well as negative emotions receive more likes. However, when it comes to the number of comments, only negative emotions showed a significant positive influence, while positive emotions had no significant impact. These findings offer valuable insights for marketers seeking to optimize engagement strategies on YouTube, considering the unique nature of travel products. Further research into the effects of specific emotions on engagement is warranted to improve marketing strategies. This study highlights the powerful impact of emotions on viewer engagement in the context of social media, particularly on YouTube.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.5
• /
• pp.181-186
• /
• 2023

In this study, novel Eu₂O₃-BaF₂-La₂O₃-B₂O₃ oxyfluoride glasses and glass ceramics were developed by a containerless processing. Differential thermal analysis (DTA) analysis was performed to analyze the thermophysical properties of oxyfluoride glasses doped with Eu₂O₃, and photoluminescence (PL) characteristics were analyzed to evaluate the luminous efficiency depending on the degree of crystallinity. The glass transition temperature decreased with increasing BaF₂ concentration since BaF₂ acts as a network modifier in this glass system. In addition, thermal stability which can be estimated by the difference between the glass transition temperature and the onset temperature of the crystallization decreased with increasing BaF₂ contents. The peak related to the BaF₂ crystal was confirmed after the crystallization by X-ray Diffraction (XRD) analysis. Photoluminescence intensity increased after the crystallization which indicates that the Eu³⁺ ions are sited in BaF₂ crystal. La 3d_5/2 x-ray photoelectron spectroscopy (XPS) and F1s XPS spectra were analyzed to precisely understand the behavior of the fluorine ion in the glass structure. Fluorine tends to bond with the network modifying cations such as La³⁺ and Ba²⁺ ions and after the crystallization the La-F bonds decreased because F^- ions used to form BaF₂ crystals.

• Korean Journal of Radiology
• /
• v.21 no.4
• /
• pp.431-441
• /
• 2020

Objective: To compare the diagnostic performance and interobserver variability of strain ratio obtained from one or two regions of interest (ROI) on breast elastography. Materials and Methods: From April to May 2016, 140 breast masses in 140 patients who underwent conventional ultrasonography (US) with strain elastography followed by US-guided biopsy were evaluated. Three experienced breast radiologists reviewed recorded US and elastography images, measured strain ratios, and categorized them according to the American College of Radiology breast imaging reporting and data system lexicon. Strain ratio was obtained using the 1-ROI method (one ROI drawn on the target mass), and the 2-ROI method (one ROI in the target mass and another in reference fat tissue). The diagnostic performance of the three radiologists among datasets and optimal cut-off values for strain ratios were evaluated. Interobserver variability of strain ratio for each ROI method was assessed using intraclass correlation coefficient values, Bland-Altman plots, and coefficients of variation. Results: Compared to US alone, US combined with the strain ratio measured using either ROI method significantly improved specificity, positive predictive value, accuracy, and area under the receiver operating characteristic curve (AUC) (all p values < 0.05). Strain ratio obtained using the 1-ROI method showed higher interobserver agreement between the three radiologists without a significant difference in AUC for differentiating breast cancer when the optimal strain ratio cut-off value was used, compared with the 2-ROI method (AUC: 0.788 vs. 0.783, 0.693 vs. 0.715, and 0.691 vs. 0.686, respectively, all p values > 0.05). Conclusion: Strain ratios obtained using the 1-ROI method showed higher interobserver agreement without a significant difference in AUC, compared to those obtained using the 2-ROI method. Considering that the 1-ROI method can reduce performers' efforts, it could have an important role in improving the diagnostic performance of breast US by enabling consistent management of breast lesions.

• Structural Engineering and Mechanics
• /
• v.90 no.6
• /
• pp.551-568
• /
• 2024

The present study deals with static and dynamic behaviors including forced vibrations of an elastic rectangular nano plate on the two-parameter foundation. Firstly, the rectangular plate is assumed to be subjected to uniformly distributed and eccentrically applied concentrated loads. The governing equations of the problem are derived by considering the dynamic response of the plate, employing a series of the Chebyshev polynomials for the displacement function and applying the Galerkin method. Then, effects of the non-essential boundary conditions of the plate, i.e., the boundary conditions related to the shearing forces, the bending moments and the corner forces, are included in the governing equation of motion to compensate for the non-satisfied boundary conditions and increase the accuracy of the Galerkin method. The approximate numerical solution is accomplished using an iterative process due to the non-linearity of the unilateral property of the two-parameter foundation. The plate under static concentrated load is investigated in detail numerically by considering a wide range of parameters of the plate and the foundation stiffnesses. Numerical treatment of the problem in the time domain is carried out by assuming a stepwise variation of the concentrated load and the linear acceleration procedure is employed in the solution of the system of governing differential equations derived from the equation of motion. Time variations of the contact region and those of the displacements of the plate are presented in the figures for various numbers of the two-parameter of the foundation, as well as the classical and nano parameters of the plate particularly focusing on the non-linearity of the problem due to the plate lift-off from the unilateral foundation. The effects of classical and nonlocal parameters and loading are investigated in detail. Definition of the separation between the plate and the two-parameter foundation is presented and applied to the given problem. The effect of the lift-off on the static and dynamic behavior of the rectangular plate is studied in detail by considering various loading conditions. The numerical study shows that the effect of nonlocal parameters on the behavior of the plate becomes significant, when nonlinearity becomes more profound, due to the lift-off of the plate. It is seen that the size effects are significant in static and dynamic analysis of nano-scaled rectangular plates and need to be included in the mechanical analyses. Furthermore, the corner displacement of the plate is affected more significantly from the lift-off, whereas it is less marked in the time variation of the middle displacement of the plate. Several numerical examples are presented to examine the sensibility of various parameters associated with nonlocal parameters of the plate and foundation. Both stiffening and softening nonlocal parameters behavior of the plate are identified in the numerical solutions which show that increasing the foundation stiffness decreases the extent of the contact region, whereas the stiffness of the shear layer increases the contact region and reduces the foundation settlement considerably.

• Journal of the Korean Society of Radiology
• /
• v.84 no.4
• /
• pp.970-976
• /
• 2023

This study reports on diffuse leptomeningeal glioneuronal tumor (DL-GNT) in a 29- year-old male. DL-GNT is a rare central nervous system (CNS) tumor mostly seen in children and only few cases have been reported in adult patients. Our patient presented with a chronic headache that lasted for five months. MR imaging showed mild hydrocephalus, multiple rim-enhancing nodular lesions in the suprasellar cistern, diffuse leptomeningeal enhancement in the lumbosacral area, and multiple small non-enhancing cyst-appearing lesions not suppressed on fluid attenuated inversion recovery (FLAIR) images in the bilateral basal ganglia, thalami, and cerebral hemispheres. Under the impression of germ cell tumor with leptomeningeal seeding, the patient underwent trans-sphenoidal tumor removal. DL-GNT was pathologically confirmed and FGFR1 mutation was detected through a next-generation sequencing test. In conclusion, a combination of leptomeningeal enhancement and multiple parenchymal non-enhancing cyst-appearing lesions not suppressed on FLAIR images may be helpful for differential diagnosis despite overlapping imaging features with many other CNS diseases that have leptomeningeal enhancement.

• Journal of Radiation Industry
• /
• v.17 no.2
• /
• pp.161-172
• /
• 2023

Coal-fired power plants handle large quantities of coal, one of the most prominent NORM, and the coal ash produced after the coal is burned can be tens of times more radioactive than the coal. Workers in these industries may be exposed to internal exposure by inhalation of particles while handling NORM. This study evaluated the size, concentration, particle shape and density, and radioactivity concentrations of airborne suspended particles in the main processes of a coal-fired power plant. Finally, the internal radiation dose to workers from particle inhalation was evaluated. For this purpose, airborne particles were collected by size using a multi-stage particle collector to determine the size, shape, and concentration of particles. Samples of coal and coal ash were collected to measure the density and radioactivity of particles. The dose conversion factor and annual radionuclide inhalation amount were derived based on the characteristics of the particles. Finally, the internal radiation dose due to particle inhalation was evaluated. Overall, the internal radiation dose to workers in the main processes of coalfired power plants A and B ranged from 1.47×10^-5~1.12×10^-3 mSv y^-1. Due to the effect of dust generated during loading operations, the internal radiation dose of fly ash loading processes in both coal-fired power plants A and B was higher than that of other processes. In the case of workers in the coal storage yard at power plants A and B, the characteristic values such as particle size, airborne concentration, and working time were the same, but due to the difference in radioactivity concentration and density depending on the origin of the coal, the internal radiation dose by origin was different, and the highest was found when inhaling coal imported from Australia among the five origins. In addition, the main nuclide contributing the most to the internal radiation dose from the main processes in the coal-fired power plants was thorium due to differences in dose conversion factors. However, considering the external radiation dose of workers in coal-fired power plants presented in overseas research cases, the annual effective dose of workers in the main processes of power plants A and B does not exceed 1mSv y^-1, which is the dose limit for the general public notified by the Nuclear Safety Act. The results of this study can be utilized to identify the internal exposure levels of workers in domestic coal-fired power plants and will contribute to the establishment of a data base for a differential safety management system for NORM-handling industries in the future.