• Journal of information and communication convergence engineering
• /
• 제14권2호
• /
• pp.106-114
• /
• 2016

Differential sensing methods are more effective in alleviating panel noise than single-line sensing, and thus have been increasingly used in the touch screen industry. However, they have a drawback: they tend to cancel out multiple touches and need touch position recovery algorithms. This paper introduces a novel algorithm of touch position recovery for differential sensing, which is a low-complexity but high-accuracy approach for determining multiple touch positions. We have implemented the proposed method in a touch screen controller system on a chip. In the simulation experiments using realistic touch screen models and a differential sensing circuit, the algorithm exhibited a high detection performance of a signal-to-noise ratio gain of up to 52.21 dB. Therefore, we can conclude that the proposed method is substantially more accurate than the previous method. Further, the proposed method incurs little or no overhead in terms of the detection speed and the chip size.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.591-593
• /
• 2006

The differential pressure method has been used in the level measurement of steam generator in nuclear power plant. Two sensing lines from a steam generator to a pressure transmitter are needed to measure the high pressure and low pressure. The fluid conditions in the sensing line require the uniform phase with no bubbles and the slope of sensing line should be installed with forward slope. The expansion of the bubble volume according to the upper pressure and the reverse slope of sensing lines explain how the level errors took place.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권11호
• /
• pp.3738-3760
• /
• 2022

Due to increasing spectrum demand for new wireless devices applications, cooperative spectrum sensing (CSS) paradigm is the most promising solution to alleviate the spectrum shortage problem. However, in the interweave cognitive radio (CR) system, the inherent nature of CSS opens a hole to Byzantine attack, thereby resulting in a significant drop of the CSS security and efficiency. In view of this, a weighted differential sequential single symbol (WD3S) algorithm based on MATLAB platform is developed to accurately identify malicious users (MUs) and benefit useful sensing information from their malicious reports in this paper. In order to achieve this, a dynamic Byzantine attack model is proposed to describe malicious behaviors for MUs in an interweave CR system. On the basis of this, a method of data transmission consistency verification is formulated to evaluate the global decision's correctness and update the trust value (TrV) of secondary users (SUs), thereby accurately identifying MUs. Then, we innovatively reuse malicious sensing information from MUs by the weight allocation scheme. In addition, considering a high spectrum usage of primary network, a sequential and differential reporting way based on a single symbol is also proposed in the process of the sensing information submission. Finally, under various Byzantine attack types, we provide in-depth simulations to demonstrate the efficiency and security of the proposed WD3S.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.722-725
• /
• 2012

본 논문에서는 프로그램 된 eFuse 링크의 센싱 저항이 작으면서 기준 전압없이 BL 데이터를 센싱가능한 differential paired eFuse 셀을 사용하여 BCD 공정 기반의 8비트 eFuse OTP를 설계하였다. Differential eFuse OTP 셀의 프로그램 트랜지스터의 채널 폭은 $45{\mu}m$과 $120{\mu}m$으로 split하였다. 그리고 프로그램된 eFuse 저항의 변동을 고려한 variable pull-up load를 갖는 센싱 마진 테스터(sensing margin test) 회로를 구현하였다. $0.35{\mu}m$ BCD 공정을 이용하여 제작된 8bit eFuse OTP IP를 측정한 결과 프로그램 트랜지스터의 채널 폭이 $120{\mu}m$인 OTP IP의 수율이 $45{\mu}m$인 OTP IP보다 양호한 것으로 나타났다.

• Smart Structures and Systems
• /
• 제5권3호
• /
• pp.279-290
• /
• 2009

Two degrees of freedom resonant systems are employed to improve the resonant property of resonant sensor, as compared to a single degree of freedom resonant system. This paper presents design, development and testing of two degrees of freedom resonant sensor. To measure absolute mass, cantilever shaped two different masses (smaller/absorber mass and bigger/drive mass) with identical resonant frequency are mechanically linked to form 2 - Degree-of-Freedom (DOF) resonator which exhibits higher amplitude of displacement at the smaller mass. The same concept is extended for measuring differential quantity, by having two bigger mass and one smaller mass. The main features of this work are the 3 - DOF resonator for differential detection and the microcontroller based closed loop electronics for resonant sensor with piezoelectric sensing and excitation. The advantage of using microcontroller is that the method can be easily extended for any range of measurand.

• 대한원격탐사학회지
• /
• 제7권1호
• /
• pp.29-43
• /
• 1991

The study was performed to extraction the ground water potential area using LANDSAT TM data. The image processing techniques developed for the study are contrast transformation, differential filtering and pseudo stereoscopic image methods. These were examined for lineament extraction, lineament interpretation and the integration of vertor data with LANDSAT data. The differential filtering method is much usefull for lineament extraction, and all direction lineaments are clearly shown on the band 5 image of LANDSAT TM. The pseudo stereoscopic image are made in which color differential method is adopted, the pair images are usefull for the lineament interpretation. The results of the analysis are as follows. 1) there is a close correlation between lineament and cased well in the study area, because 33 wells of the developed 45 cased wells coincide with the lineaments. 2) 21 sites in the study area were selected for pumping test, and as a result 11 sites of them produces over than 200 ton/day.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 춘계학술대회 논문집
• /
• pp.121-124
• /
• 2006

• 한국정보통신학회논문지
• /
• 제17권2호
• /
• pp.405-413
• /
• 2013

본 논문에서는 program-verify-read 모드를 갖는 고신뢰성 24bit differential paired eFuse OTP 메모리를 설계하였다. 제안된 program-verify-read 모드에서는 프로그램된 eFuse 저항의 변동을 고려하여 가변 풀-업 부하(variable pull-up load)를 갖는 센싱 마진 테스트 기능을 수행하는 동시에 프로그램 데이터와 read 데이터를 비교하여 PFb(pass fail bar) 핀으로 비교 결과를 출력한다. 그리고 모의실험 결과 program-verify-read 모드에서 24-비트 differential paired eFuse OTP와 24-비트 듀얼 포트 eFuse OTP IP의 센싱 저항은 각각 $4k{\Omega}$과 $50k{\Omega}$으로 differential paired eFuse OTP의 센싱 저항이 작게 나왔다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.492-495
• /
• 1997

This paper aims to derive a mathematical model of the dynamics of handling task in field robot which stable grasping and manipulates a rigid object with some dexterity. Firstly, a set of differential equation describing dynamics of the manipulators and object together with geometric constraints of tight area-contacts on motion of the overall system is analyzed and a method of computer simulation for overall system of differential-algebraic equations is presented. Thirdly, simulation results are shown and the effects of geometric constraints of contact-area are discussed. Finally, it is shown that even in the simplest case of dual single D.O.F. manipulators there exists a sensory feedback from sensing data of he rotational angle of the object to command inputs to joint actuators and this feedback connection from sensing to action eventually realizes secure grasping of the object, provided that he object is of rectangular shape and motion is confined to a horizontal

• 센서학회지
• /
• 제8권6호
• /
• pp.434-439
• /
• 1999

집적형 습도센서를 위해 이중게이트 금속을 증착한 차동형 전계효과 트랜지스터를 제조하고 상대습도에 따른 드레인전류 드리프트특성을 조사하였다. 감지소자와 비감지소자의 전류차를 얻기 위해 두 트랜지스터의 종횡비는 250/50으로 같게 하였다. 제조된 습도감지 전계효과 트랜지스터의 표준화된 드레인전류는 상대습도가 30%에서 90%로 증가함에 따라 0.12에서 0.3으로 증가하였다.