• 제목/요약/키워드: Differential reaction

검색결과 663건 처리시간 0.03초

언더필용 에폭시 수지 조성물의 경화 및 유변학적 거동 (Curing and Rheological Behavior of Epoxy Resin Compositions for Underfill)

  • 김윤진;박민;김준경;김진모;윤호규
    • Elastomers and Composites
    • /
    • 제38권3호
    • /
    • pp.213-226
    • /
    • 2003
  • Imidazole 촉매의 종류에 따른 bisphenol-F계 에폭시 (Diglycidyl ether of bisphenol-F)/nadic methyl anhydride 수지 시스템의 경화 및 유변학적 거동이 시차주사열량계 (differential scanning calorimeter)와 회전 점도계를 사용하여 연구되었다. 경화반응기구를 분석하기 위해서 몇 개의 등온경화온도에서 등온시험이 수행되었다. Bisphenol-F계 에폭시/anhydride 조성물의 경화곡선은 전환량이 $20{\sim}40 %$일 때 최대 값을 보이는 자체촉매반응을 나타내었다. 속도상수($k_1,\;k_2$)는 온도 의존성을 가지나 반응차수 (m+n)는 온도 의존성이 없었으며, 반응차수는 거의 3으로 계산되었다. 촉매의 종류에 따라 두 개의 반응기구를 가지고 있었다. G'-G" crossover 방법을 통해 겔화 시간을 측정하였으며, 이 결과로부터 활성화에너지를 구하였다. 용융 실리카를 첨가한 조성물의 유변학적 거동으로부터 온도와 충전제 함량에 따른 겔화 시간의 대수 변화가 직선적인 관계를 나타낸다는 것을 알 수 있었다. 고충전된 에폭시 수지 조성물은 전형적인 준소성 거동을 보였으며, 최대충전밀도가 클수록 점도는 낮아졌다.

소성Dolomite 수화물계의 축열시스템에 관한 연구 - 소성Dolomite 탈수반응층의 전열해석 - (A Study on Heat Storage System Using Calcined Dolomite - Numerical Analysis of Heat Transfer in Calcined Dolomite Dehydration Packed Bed -)

  • 박영해;김종식
    • 한국태양에너지학회 논문집
    • /
    • 제23권1호
    • /
    • pp.29-38
    • /
    • 2003
  • To develope chemical heat pump using available energy sources, solar heat and other kinds of waste thermal energy, we have studied the material and heat transfer rate in the cylindrical bed reactor packed with Calcined Dolomite. Our results from the studies are as follows ; 1 The time needed to complete dehydration reaction at the wall side of the cylindrical reactor(r/rL=0.5) was shorter than that of the center(r/rL=0.0) as much as 12%. 2. Two dimensional (radial and circumferential) partial differential equations, concerning heat and mass transfer rate in the packed bed of calcined Dolomite, are solved numerically to describe the characteristics of the reaction in the cylindrical reactor. The solution reads rate of reaction in the packed bed reactor depends on the temperature and concentration of reactants. These results read the supplied heat transfers from the wall side of the cylinder to the center, dehydration reaction begins at the inner side of the wall of the cylindrical reactor and the dehydration reaction proceeds from the wall side to center of cylinder.

유해 할로겐화 탄화수소 폐기물 처리를 위한 열분해 반응 (Pyrolysis Reaction for the Treatment of Hazardous Halogenated Hydrocarbon Waste)

  • 조완근
    • 한국환경과학회지
    • /
    • 제6권4호
    • /
    • pp.399-407
    • /
    • 1997
  • The pyrolysis reactions of atomic hydrogen with chloroform were studied In a 4 cm 1.6. tubular flow reactor with low flow velocity 1518 cm/sec and a 2.6 cm 1.4. tubular flow reactor with high flow velocity (1227 cm/sec). The hydrogen atom concentration was measured by chemiluminescence titration with nitrogen dioxide, and the chloroform concentrations were determined using a gas chromatography. The chloroform conversion efficiency depended on both the chloroform flow rate and linear flow velocity, but 416 not depend on the flow rate of hydrogen atom. A computer model was employed to estimate a rate constant for the initial reaction of atomic hydrogen with chloroform. The model consisted of a scheme for chloroform-hydrogen atom reaction, Runge-Kutta 4th-order method for Integration of first-order differential equations describing the time dependence of the concentrations of various chemical species, and Rosenbrock method for optimization to match model and experimental results. The scheme for chloroform-hydrogen atom reaction Included 22 elementary reactions. The rate constant estimated using the data obtained from the 2.6 cm 1.4. reactor was to be 8.1 $\times$ $10^{-14}$ $cm^3$/molecule-sec and 3.8 $\times$ $10^{-15}$ cms/molecule-sec, and the deviations of computer model from experimental results were 9% and 12% , for the each reaction time of 0.028 sec and 0.072 sec, respectively.

  • PDF

고리형 아민과 이산화탄소의 반응에서 온도와 흡수능이 반응열에 미치는 영향 (Effect on the Heat of Reaction to Temperature and Absorption Capacity in the Reaction of Cyclic Amines with Carbon Dioxide)

  • 최정호;장종탁;윤성희;조원희;정진영;윤여일
    • 한국수소및신에너지학회논문집
    • /
    • 제29권5호
    • /
    • pp.530-537
    • /
    • 2018
  • The effect of temperature and absorption capacity on heat of reaction, which is one of the characteristic studies of $CO_2$ absorption, were investigated in a differential reaction calorimeter (DRC) by using piperazine (PZ) and 2-methylpiperazine (2-MPZ). For all absorbents, $CO_2$ loading capacity decreased with increasing the temperature, while the heat of reaction increased, it figured out that these had a linear correlation between $CO_2$ loading capacity and/or heat of reaction and the temperature. The heat of reaction of all absorbents increased with increasing $CO_2$ loading capacity, especially 2-MPZ rapidly increased at $70^{\circ}C$. The reason for increase in the heat of reaction was occurred the regeneration of $CO_2$, which is a reverse-reaction, simultaneously with the absorption.

디젤엔진 배출가스 질소산화물 저감을 위한 Solid SCR의 반응률에 관한 연구 (A Study on Reaction Rate of Solid SCR for NOx Reduction of Exhaust Emissions in Diesel Engine)

  • 이호열;윤천석;김홍석
    • 한국자동차공학회논문집
    • /
    • 제21권6호
    • /
    • pp.183-194
    • /
    • 2013
  • Liquid urea based SCR has been used in the market to reduce NOx in the exhaust emission of the diesel engine vehicle. This system has several problems at low temperature, which are freezing below $-12^{\circ}C$, solid deposit formation in the exhaust, and difficulties in dosing system at exhaust temperature below $200^{\circ}C$. Also, it is required complicated exhaust packaging equipment and mixer due to supply uniform ammonia concentration. In order to solve these issues, solid urea, ammonium carbonate, and ammonium carbamate are selected as ammonia sources for the application of solid SCR. In this paper, basic research on reaction rate of three ammonia-transporting materials was performed. TGA (Thermogravimetric Analysis) and DTA (Differential Thermal Analysis) tests for these materials are carried out for various heating conditions. From the results, chemical kinetic parameters such as activation energy and frequency factor are obtained from the Arrhenius plot. Additionally, from test results of DSC (Differential Scanning Calorimeter) for these materials, chemical kinetic parameters using the Kissinger method are calculated. Activation energies of solid SCR from this experiment are compared with proper data of literature study, then obtained data of this experiment are used for the design of reactor and dosing system for candidate vehicle.

상악골괴사 환자에서 페니실린 정주 후 아나필락틱 쇼크: 증례보고 (Anaphylactic Shock after Intravenous Injection of Penicillin in a Patient with Maxillary Osteonecrosis: Report of a Case)

  • 오지현;손정석;최병호;이정섭;김지훈;유재하
    • 대한치과마취과학회지
    • /
    • 제14권4호
    • /
    • pp.243-250
    • /
    • 2014
  • Generalized anaphylaxis is a most dramatic and acutely life-threatening allergic reaction and may cause death within a few minutes. Differential diagnosis of anaphylaxis is made by clinical signs, such as, mental change, respiratory distress, hypotension, hypoglycemia, urticaria and angioedema. Especially, insulin reaction, myocardial infarction and vasovagal syncope are considered as differential diagnosis. In cases of fatal anaphylaxis, respiratory and cardiovascular disturbances predominate and are evident early in the reaction. This is a case report of the intensive care of anaphylactic shock after intravenous injection of the penicillin in a old medically compromised patient with the maxillary osteonecrosis. The anaphylactic shock symptoms, such as, unconsciousness, respiratory disorder, no pulsation on carotid artery and cardiopulmonary arrest are occurred in intravenous injection of augmentin 1.2 g after the skin test. In spite of immediate emergency cares, such as intravenous injection of epinephrine, endotracheal intubation, cardiopulmonary resuscitation, and continuous intensive care, the patient is expired in 58 hours after anaphylactic shock attack.

Epoxy Molding Compound의 경화거동에 관한 연구 (A Study on the Cure Behavior of Epoxy Molding Compound)

  • 윤상영;오명숙;박내정
    • 폴리머
    • /
    • 제24권6호
    • /
    • pp.837-844
    • /
    • 2000
  • 본 연구에서는 반도체 봉지제로 사용되는 상용 EMC중 가속제의 함량이 다른 두 종류의 프리프레그에 대하여 그 경화거동을 등온 및 승온조건에서 시차 주사 역량계, 점도계 및 유전율 측정계를 이용하여 분석하였다. 경화반응 속도변수는 Kamal의 자동촉매 반응식을 이용하여 m+n을 2로 가정한 후 Ryan Dutta의 방법에 따라 계산에 의한 경화반응 속도의 예측 치와 실제 실험 데이터가 10$0^{\circ}C$를 제외한 나머지 온도에서는 잘 일치하는 경향을 나타내었다. 경화과정 중 겔화와 유리화와 같은 상 전이를 관찰하였으며 각각의 등온 경화온도에서 경화시간에 따른 유리전이 온도 ($T_{g}$ )를 측정하여 경화온도와 유리전이 온도가 같아지는 유리화점을 구할 수 있었고 절대온도와의 사이에 Arrhenius관계가 성립함을 확인하였다. 또한 평판형 전극을 이용한 DEA는 EMC의 경화 과정을 동정하는데 효과적으로 이용될 수 있음을 알 수 있었다. 같은 종류의 수지 시스템에서는 TTT diagram상에서 $_{gel}$$T_{g}$ 가속제의 농도에 상관없이 일정한 온도에서 나타남을 확인하였다.

  • PDF

케블라/에폭시 프리프레그의 경화특성에 관한 연구 (A Study on the Curing Properties of Kevlar/Epoxy Prepreg)

  • 제갈영순;이원철;권오혁;윤남균;임길수;안종기;박경준
    • Composites Research
    • /
    • 제14권2호
    • /
    • pp.1-7
    • /
    • 2001
  • 본 논문은 항공기 노스콘(nose cone) 제작에 사용되는 Kevlar/Epoxy 프리프레그의 조성과 경화거동을 연구한 것이다. 이 소재의 경화거동을 dielectrometer와 시차주사열분석기를 사용하여 연구하였다. 이 프리프레그는 $120^{\circ}C$ 부근에서 가장 낮은 이온점도를 보였으며, 이 이후 경화반응의 진행과 함께 점도가 $200^{\circ}C$ 까지는 상승하는 경향을 보여 주었다. 이것은 이 프리프레그의 경화반응이 $120^{\circ}C$ 부근에서 개시됨을 의미하며, 이 온도 이후부터 가속화된 분자간 가교화 반응을 통해서 분자량이 현저히 커짐을 의미한다. 본 프리프레그의 dynamic scan에 따른 loss factor 및 tan $\delta$값을 측정/연구하였는데, 매트릭스의 유동성과 매우 밀접한 관계에 있는 loss factor 거동은 이온점도 거동과 매우 유사하였다. 본 프리프레그의 열반응 특성을 시차주사열분석기를 사용해서 연구하였다.

  • PDF

Effects of Reagent Rotation on Stereodynamics Information of the Reaction O(1D)+H2 (v = 0, j = 0-5) → OH+H: A Theoretical Study

  • Kuang, Da;Chen, Tianyun;Zhang, Weiping;Zhao, Ningjiu;Wang, Dongjun
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권10호
    • /
    • pp.2841-2848
    • /
    • 2010
  • Quasiclassical trajectory (QCT) method has been used to investigate stereodynamics information of the reaction $O(^1D)+H_2{\rightarrow}\;OH$+H on the DK (Dobbyn and Knowles) potential energy surface (PES) at a collision energy of 23.06 kcal/mol, with the initial quantum state of reactant $H_2$ being set for v = 0 (vibration quantum number) and j = 0-5 (rotation quantum number). The PDDCSs (polarization dependent differential cross sections) and the distributions of P($\theta_r$), P($\phi_r$), P($\theta_r$, $\phi_r$) have been presented in this work. The results demonstrate that the products are both forward and backward scattered. As j increases, the backward scattering becomes weaker while the forward scattering becomes slightly stronger. The distribution of P($\theta_r$) indicates that the product rotational angular momentum j' tends to align along the direction perpendicular to the reagent relative velocity vector k, but this kind of product alignment is found to be rather insensitive to j. Furthermore, the distribution of P($\phi_r$) indicates that the rotational angular momentum vector of the OH product is preferentially oriented along the positive direction of y-axis, and such product orientation becomes stronger with increasing j.

Serum proteomics analysis of feline mammary carcinoma based on label-free and PRM techniques

  • Zheng, Jia-San;Wei, Ren-Yue;Wang, Zheng;Zhu, Ting-Ting;Ruan, Hong-Ri;Wei, Xue;Hou, Kai-Wen;Wu, Rui
    • Journal of Veterinary Science
    • /
    • 제21권3호
    • /
    • pp.45.1-45.15
    • /
    • 2020
  • Background: Feline mammary carcinoma is the third most common cancer that affects female cats. Objectives: The purpose of this study was to screen differential serum proteins in feline and clarify the relationship between them and the occurrence of feline mammary carcinoma. Methods: Chinese pastoral cats were used as experimental animals. Six serum samples from cats with mammary carcinoma (group T) and six serum samples from healthy cats (group C) were selected. Differential protein analysis was performed using a Label-free technique, while parallel reaction monitoring (PRM) was performed to verify the screened differential proteins. Results: A total of 82 differential proteins were detected between group T and group C, of which 55 proteins were down regulated and 27 proteins were up regulated. Apolipoprotein A-I, Apolipoprotein A-II (ApoA-II), Apolipoprotein B (ApoB), Apolipoprotein C-III (ApoC-III), coagulation factor V, coagulation factor X, C1q, albumen (ALB) were all associated with the occurrence of feline mammary carcinoma. Differential proteins were involved in a total of 40 signaling pathways, among which the metabolic pathways associated with feline mammary carcinoma were the complement and coagulation cascade and cholesterol metabolism. According to the Label-free results, ApoB, ApoC-III, ApoA-II, FN1, an uncharacterized protein, and ALB were selected for PRM target verification. The results were consistent with the trend of the label-free. Conclusions: This experimen is the first to confirm ApoA-II and ApoB maybe new feline mammary carcinoma biomarkers and to analyze their mechanisms in the development of such carcinoma in feline.