• 한국통신학회논문지
• /
• 제35권12C호
• /
• pp.995-1003
• /
• 2010

영상, 동영상 및 3D 모델의 인증 및 복사방지를 위한 콘텐츠 기반 해쉬 함수는 강인성 및 보안성의 성질을 만족하여야 한다. 이들 중 해쉬의 보안성을 분석하기 위한 방법으로 미분 엔트로피 방법이 제시되었으나, 이는 영상 해쉬 추출에서만 적용되었다. 따라서 본 논문에서는 미분 엔트로피 기반의 3D 모델 해쉬 특징 추출의 보안성을 분석하기 위한 모델링을 제안한다. 제안한 보안성 분석 모델링에서는 3D 모델 해싱 기법 중 가장 일반적인 두 가지 형태의 특정 추출 방법을 제시한 다음, 이들 방법들을 미분 엔트로피 기반으로 보안성을 분석하였다. 과로부터 해쉬 추출 방법에 대한 보안성을 분석하고 보안성과 강인성과의 상호보완관계에 대하여 논하였다.

• 한국화재소방학회논문지
• /
• 제33권6호
• /
• pp.53-62
• /
• 2019

최근 건축물은 대지 이용의 효율성을 높이기 위해 주상 복합화·고층화되는 추세이며, 이에 따른 화재의 발생빈도 및 잠재적인 위험요소도 증가하고 있다. 특히, 고층 공동주택의 경우 비상용승강기와 별도로 승용승강기 중 1대 이상을 피난용승강기로 설치하게 되어 특별피난계단 부속실, 비상용승강기 승강장 겸용의 경우 피난용승강기 승강장과 직렬형태의 구조가 되어 새로운 형태의 제연구역 이 발생한다. 따라서 비상용승강기 승강장과 피난용승강기 승강장의 직렬형태 구조에 대한 제연구역 선정의 제시가 필요하며, 새로운 형태에서 제연성능을 달성하는 것에 대한 문제가 대두되고 있다. 따라서 본 논문에서는 이러한 문제를 해결하기 위해 CONTAM을 이용하여 각 제연구역 형식(비상용승강기 승강장 단독제연, 피난용승강기 승강장 단독제연, 비상용승강기 승강장과 피난용승강기 승강장 동시제연 누설틈새 적용·미적용)의 방연풍속, 차압을 확인하고, 직렬형태 구조에 대해 제연성능을 확보하기 위한 방안을 제시하고자 한다.

• KIEE International Transactions on Power Engineering
• /
• 제2A권4호
• /
• pp.153-159
• /
• 2002

Power transformer protective relay should block the tripping during magnetizing inrush and rapidly operate the tripping during internal faults. Recently, the frequency environment of power system has been made more complicated and the quantity of 2nd frequency component in inrush state has been decreased because of the improvement of core steel. And then, traditional approaches will likely be maloperate in the case of magnetizing inrush with low second harmonic component and internal faults with high second harmonic component. This paper proposes a new relaying algorithm to enhance the fault detection sensitivities of conventional techniques by using a fuzzy logic approach. The proposed fuzzy based relaying algorithm consists of flux-differential current derivative curve, harmonic restraint, and percentage differential characteristic curve. The proposed relaying was tested with relaying signals obtained from EMTP simulation package and showed a fast and accurate trip operation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.323-325
• /
• 2003

A current differential relay may maloperate for external faults with CT saturation and requires an additional method to cope with the problem. This paper proposes a current differential relaying algorithm for transmission line protection using an advanced compensation algorithm of the secondary current of CTs. The compensation algorithm is unaffected by a remanent flux. The proposed algorithm does not need an additional method for CT saturation and thus can achieve high stability for an external fault.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.329-331
• /
• 2003

PROSET2000 that is integrated protective management system had developed and used in order to automate the setting process of protective relays in transmission system protection. PROSET2000 have database for relay setting and automated for relay setting program within. This paper proposed PCM current differential relay setting program point of Object Oriented Programming paradigm using Unified Modeling Language about additional relay in PROSET2000. Nevertheless each relay uses same current differential but setting method is different. This paper discribed different thing about setting method of each relay and evaluated more effective and corrective relay setting program using UML.

• 대한전기학회논문지
• /
• 제43권5호
• /
• pp.711-720
• /
• 1994

A distance relaying algorithm for detecting faults at power transmission line is presented in this paper. The algorithm is based on differential equation from relaton between voltage and current, which is composed of lumped resistance and inductance. During the fault transient state,the voltage and current signals are severely distorted due to the exponentially decaying DC offset and high frequency components, In spite of using small data, the presented integral method to evaluate R and L from voltage and current has high performance against these harmonics including DC offset. Therefore, the presented algorithm can be implemented with only a low order anti-aliasing analog filter and dosen't need any digital filter to remove specific components.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.217-219
• /
• 2004

The second harmonic component could be decreased by magnetizing inrush when there have been changes to the material of the iron core or its design methodology. The higher the capacitance of the high voltage status and underground distribution, the more the differential current includes the second harmonic during the occurrence of an internal fault. Therefore, the conventional second harmonic-restrained RDR needs modification. This paper describes an advanced numerical algorithm that utilizes terminal voltage, differential current harmonics, harmonic ratio, and flux-differential current slope. Based on the results of testing with WatATP99 simulation data, the proposed algorithm was proven to be faster and more reliable.

• 전기학회논문지P
• /
• 제57권2호
• /
• pp.91-95
• /
• 2008

The large AC generator fault may lead to large impacts or perturbations in power system. The generator protection control systems in Korea have been imported and operated through a turn-key from overseas entirely. Therefore a study of the generator protection field has in urgent need for a stable operation of the imported goods. In present, the algorithm using the current ratio differential relaying based DFT for stator winding protection or a fault detection had been applied that of internal fault protection of a generator. the DFT used for the analysis of transient state signal conventionally had defects losing a time information in the course of transforming a target signal to frequency domain. In this paper, the discrete wavelet transform (DWT) was applied a fault detection of the generator being superior to a transient state signal analysis and being easy to real time realization. The fault signals after executing a terminal fault modeling collect using a MATLAB package, and calculate the wavelet coefficients through the process of a muiti-level decomposition (MLD). The proposed algorithm for a fault detection using the Daubechies WT (wavelet transform) was executed with a C language and the commend line function for the real time realization after analyzing MATLAB's graphical interface. The advanced technique had improved faster a speed of fault discrimination than a conventional DFR based on DFT.

• 전기의세계
• /
• 제25권4호
• /
• pp.59-62
• /
• 1976

This study on the characteristics of the leakage circuit breakers handles the rolls of each itemized parts of the mentioned apparatus and their influence in determining of the characteristic curve of leakage circuit breaker. Furthermore the differential current transforms in the mentioned apparatus for detecting the fault is handled as a heavy point.

• 한국전자통신학회논문지
• /
• 제14권6호
• /
• pp.1129-1138
• /
• 2019

변전소는 변전설비들이 제한된 장소에 집중되어 구조적으로 복잡하기 때문에 송전선로나 배전선로 상에서 고장발생 시 고장파급효과를 최소화하기 위한 보호협조 시스템을 설계하기가 쉽지 않다. 본 연구에서는 변전소 전력공급 신뢰성에 핵심적인 영향을 미치는 모선 방식과 보호협조 기초논리를 분석하였으며 EMTP-RV 기반으로 변전소 내부 및 외부 고장을 정확하게 검출하기 위한 변전소 보호협조 논리를 모델링하였다. 변전소 보호협조 기본 논리로서 변전소 내부 고장 검출을 위한 비율차동 보호계전 논리와 외부고장을 추론하기 위한 과부하 보호계전 논리가 모델링되었다. 끝으로, EMTP-RV를 이용하여 개발된 보호협조 논리 모델링을 기반으로 154kV 변전소를 모델링한 후, 수개의 고장모의를 통해 EMTP-RV 모델링 결과의 유효성을 확인하였다.