• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.967-974
• /
• 1994

We studied the cure kinetics of the DGEBA(Diglycidyl ether of bisphenol A)/MDA(4, 4' -methylene dianiline)/MN(Malononitrile)/HQ(Hydroquinone) system by Barrett method and Integral method with dynamic runs of differential scanning calorimetry(DSC). Kinetic parameters such as activation energy and pre-exponential factor were obtained and reaction order was estimated roughly supposing that present system was adjusted to nth order reaction. The MN(Malononitrile) was introduced as a chain extender and HQ(Hydroquinone) as a reactive accelerator or catalyst.

• YAKHAK HOEJI
• /
• v.38 no.3
• /
• pp.300-310
• /
• 1994

Physicochemical properties for the inclusion complex of chenodeoxycholic acid(CDCA) and it's $7{\beta}-hydroxy$ epimer ursodeoxycholic acid(UDCA) with ${\beta}-cyclodextrin({\beta}-CyD)$ were studied. The formation of the complex in the solid state were confimed by polarized microscopy and differential scanning calorimetry(DSC). Proton nuclear magnetic resonance$(^1H-NMR)$spectroscopy showed that CDCA and UDCA form an inclusion complex with ${\beta}-CyD$ in aqueous solution. The 1 : 1 stoichiometry of the complex was dextermined by the continuous variation method. From DSC and $^1H-NMR$ studies, there were not any differences between CDCA and UDCA. Complex of CDCA and UDCA showed increase in solubility and dissolution compared with CDCA and UDCA alone, respectively. Solubility pattern of UDCA complex was pH independent but, CDCA complex was like that of CDCA. Dissolution rate increased markedly in case of UDCA complex compared with CDCA complex, especially in acidic pH value.

• Composites Research
• /
• v.14 no.2
• /
• pp.33-42
• /
• 2001

The cure kinetic equation fur 52-glass/polyester prepreg composites was established through DSC (differential scanning calorimetry). Using the established kinetic equation, the temperature distribution of the thick composite was calculated considering the change of heat transfer resistance due to resin impregnation of bleeder plies used. In order to reduce the overheat during cure of thick glass fiber composites, the cure cycle was modified by introducing the cooling and reheating steps. Then the thick glass composites were cured both by the conventional cycle without any cooling or reheating step and the modified cure cycle. The mechanical properties of the thick composites cured by the both cycles were tested by the short beam shear test and the Barcol hardness test, and then their results were compared.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.2
• /
• pp.185-194
• /
• 2007

This study was performed to evaluate the physicochemical, sensory evaluation of Backsulgi changed with germinated brown rice flour(GBRF) at different ratio. Moisture content decreased gently during storage and the decrease was less in GBRF-added groups than the control group. The color L value decreased significantly by with increasing the GBRF, wherease the redness(a) and yellowness(b) were both increased. As the result of measurement with texture analyzer, hardness, gumminess, chewiness, adhesiveness and fracturability of Backsulgi tended to decrease in proportion to the amount of GBRF in the formula. The thermal properties of Backsulgi were investigated by differential scanning calorimetry(DSC). Onset temperature and peak temperature of gelatinizatino in thermal characteristics showed low in case of addition of GBRF into Backsulgi. All samples changed with GBRF had low values in change of melting enthalphy. In the sensory evaluation, Backsulgi with GBRF were superior in flavor, cohesiveness, hardness, chewiness and moistureness than that of control. And Backsulgi with 20% GBRF showed the highest score in overall acceptability. Therefore we concluded that the addition of GBRF on Backsulgi improve the sensory characteristics as well as delay the retrogradation.

• Journal of Adhesion and Interface
• /
• v.13 no.2
• /
• pp.53-57
• /
• 2012

A latent curing system was necessary for the anisotropic conducting film (ACF), and a fast reaction system was also necessary to fast production. In this study, the benzylsulfonium salts were synthesized and were used as latent curing initiators for epoxy resin. These benzylsulfonium compounds exhibited a long shelf life with epoxy resin. The curing behaviors of an epoxy resin with these sulfonium salts were investigated using differential scanning calorimetry (DSC), and the curing times were determined at $150^{\circ}C$ using an indentation method.

• Journal of the Korean Society of Safety
• /
• v.24 no.4
• /
• pp.40-46
• /
• 2009

The early identification of thermal hazards associated with a process such as the heats of reaction, exothermic decompositions, and the understanding of thermodynamics before any large scale operations are undertaken. The evaluation of reaction factors and thermal behavior on esterification process in manufacture of concrete mixture agents are described in the present paper. The experiments were performed in the differential scanning calorimetry(DSC), C 80 calorimeter, and thermal screening unit($TS^u$). The aim of the study was to evaluate the thermal stability of single material and mixture in esterification process. We provided the thermal data of chemical materials to present safe operating conditions through this study.

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.196-202
• /
• 2011

The cure kinetics of a bisphenol A epoxy resin and polyoxypropylene diamine curing agent system are investigated in both dynamic and isothermal conditions by differential scanning calorimetry (DSC). In dynamic experiments, the shift of exothermic peaks obtained at different heating rates is used to obtain activation energy of overall cure reaction based on the methods of Ozawa and Kissinger. Isothermal DSC data at different temperatures are fitted to an autocatalytic Kamal kinetic model. The kinetic model is in a good agreement with the experimental data in the initial stage of cure. A diffusion effect is incorporated to describe the later stage of cure, predicting the cure kinetics over the whole range of curing process. Also, dynamic mechanical analysis is performed to evaluate the storage modulus and average molecular weight between crosslinkages.

• Journal of the Korean Society of Food Culture
• /
• v.20 no.3
• /
• pp.299-304
• /
• 2005

This study investigated the feasibility of the bread making process with the mixture of the functional rice flour. The bread was manufactured with 20, 30 or 40% functional rice flour with increasing and wheat flour. Gelatinization characteristics of the rice starch was examined by differential scanning calorimetry(DSC). Coated with soluble dietary fiber rice showed the highest gelatinization enthalphy among functional rices and other functional rices were similar to normal rice. in the viscosity point of view. generally the viscosity related to the addition ratio. The most viscose case was 30% Sangwhang rice but in fermented with monascus ruber rice case, viscosity was low even with 40% case because of the transformation of the starch granules. In sensory evaluation, the highest sensory scores for the uniformity of pore size and flavor were obtained when sangwhang rice flour content was 20%. The textual study was mainly focused on the hardness, cohesiveness, adhesiveness, springiness, chewiness. Textural characteristics of functional rice bread crumb bakedwith 20% coated with soluble dietary fiber rice, 20% sangwhang was low in hardness, chewiness and gumminess. Therefore, Sangwhang rice flour 20%, Monascous ruber 20% and Coated soluble dietary fiber rice 20% were considered to be the most suitable addition ratio for the rice breads.

• Elastomers and Composites
• /
• v.40 no.1
• /
• pp.37-44
• /
• 2005

Novel polyurethanes containing no mesogenic unit were synthesized by the polyaddition reaction of para-type diisocyanates such as 2,5-tolylene diisocyanate (2,5-TDI) or 1,4-phenylene diisocyanate (1,4-PDI) with 2,6-bis(${\omega}$-hydroxyalkoxy)naphthalene (BHNm; m= 5, 6, 8, 11). Intrinsic viscosities of the polymers were in the range of 0.28-0.43 dL/g. The thermal properties of these polymers were studied by differential scanning calorimetry and polarizing microscopy. Polyurethanes prepared from BHNm and 2,5-TDI haying methyl substituent on the phenylene unit exhibited monotropic liquid crystallinity. However, in the series of polyurethanes prepared from 1,4-PDI and BHNm, no explicit mesomorphic behavior was observed by differential scanning calorimetry and polarizing microscopy.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3535-3542
• /
• 2023

Eutectic reactions of five kinds of Cr-coated Zr alloy cladding with different base materials (Zr-Nb-Sn alloy or Zr-Nb alloy), different coating thicknesses (6~22.5 mm), and different coating materials (Cr single layer or Cr/CrN bilayer) were studied using Differential Scanning Calorimetry (DSC). The DSC experiments demonstrated that the onset temperatures of the Cr single layer coated specimens were almost identical to ~1308 ℃, regardless of base materials or coating thicknesses. This study demonstrated that the Cr/CrN bilayer coated Zr-Nb-Sn alloy has a slightly (~10 ℃) higher eutectic onset temperature compared to the single Cr-coated specimen. The eutectic region characterized by post-eutectic microstructure proportionally increases with coating thickness. The post-eutectic characterization with different holding times at high temperature (1310-1330 ℃) reveals that progression of Zr-Cr eutectic requires time, and it dramatically changed with exposure time and temperature. The practical value of the time gain in non-instantaneous eutectic formation in terms of safety margin, however, seems to be limited.