• ETRI Journal
• /
• 제31권1호
• /
• pp.74-76
• /
• 2009

A new feeding method for the circular polarization (CP) dielectric resonator antenna (DRA) is proposed in this letter. Two orthogonal modes (${TE^x}_{{\delta}11}$, ${TE^y}_{1{\delta}1$) of the rectangular DRA are excited by a $90^{\circ}$ phase difference of the differential and common modes currents of the proposed feeding structure. To demonstrate the good CP performance of the proposed method, a right-hand CP DRA for a global positioning system was designed. The impedance bandwidth of the proposed antenna for $S_{11}$ < -10 dB and 3 dB axial ratio bandwidth are about 5.4% and 1.95% at 1.57 GHz, respectively.

• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.143-151
• /
• 1995

The electrochemical impulse oscillations of the cathodic currents at the platinum group (Pt, Pd) electrode/(0.05M KHC$_{8}H_{4}O_{4}$) buffer solution interfaces have been studied using voltammetric, chronoamperometric, and electrochemical impedance methods. The periodic impulses of the cathodic currents are the activation controlled currents due to the hydrogen evolution reaction, and depend on the fractional surface coverage of the adsorbed hydrogen intermediate and potential. The oscillatory mechanism of the cathodic current impulses is connected with the unstable steady state of negative differential resistance. The widths and periods of the cathodic current impulses are 4ms or 5ms and 152.5ms or 305ms, respectively. The H$^{+}$ discharge reaction step is 38 or 61 times faster thatn the recombination reaction steps and the H$^{+}$ mass transport processes. The atom-atom recombination reaction step is twice faster thatn the atom-ion recombination reaction step. The two kinds of active sites corresponding to the atom-atom and atom-ion recombination reaction steps exist on the platinum group electrode surfaces.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.83-85
• /
• 1997

In this paper a numerical analysis method for eddy current testing (ECT) with axisymmetric crack is studied. The finite element method(FEM) is used for electromagnetic solution. In this paper the outer diameter crack of INCONEL 600 tube is modelled and the impedance signal is obtained using the differential probe. The characteristics of the crack depth variation in the signal are analyzed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.220-222
• /
• 1999

This paper presents a numerical analysis of the eddy current testing with cracked pipe using finite element method (FEM). ${\vec{A}},\;{\phi}-{\vec{A}}$ method is adopted for the formulation of 3-dimensional(3-D) FEM with the brick element. The cracks investigated here are the inner and outer surface of axial symmetry, 90 degree circular one. The algorithm of 3-D numerical analysis is employed for the axisymmetric pipe with the cracks. In order to verify the validity of 3-D numerical analysis, the results are compared with those of 2-D analysis with the same type of the model. The differential impedance is obtained by using energy method and its locus are various 8-shaped curves for each cracks. The ICCG method is used for the calculation of a matrix.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.32-33
• /
• 2017

기존 EMI 필터 설계의 경우, 설계 가이드 없이 반복적인 측정을 통해 규제를 만족하도록 설계하기 때문에 많은 시간을 소모하게 된다. 또한 필터 내의 불필요한 소자 사용으로 인해 회로의 부피 및 가격 상승의 문제점이 있다. 따라서 본 논문은 대상 시스템에 대한 노이즈를 공통모드 노이즈(Common Mode Noise)와 차동모드 노이즈(Differential Mode Noise)로 분리하여 측정하였으며, 등가회로 모델링 및 제안 설계 가이드를 통해 최적 EMI 필터를 설계하였다. 또한 제안 EMI 필터 설계방법을 통해 설계 시간 단축, EMI 필터 단가 및 부피 저감이 가능하게 된다. 본 논문에서는 제안 방법을 이론으로 분석하고 모의실험을 통해 확인하였으며, 실제 측정을 통해 제안 방식의 우수성을 검증하였다.

• Preventive Nutrition and Food Science
• /
• 제3권2호
• /
• pp.203-209
• /
• 1998

The development of methods for the identification of irradiated foods helps enforce national and international regulations on labelling to ensure the consumer's free choice to buy irradiated or unirradiated foods. and the availabilityof such methods may assist the promotion of international trade in irradiated food products and help prevent abuse of the technology. A number of approaches to determine the physical , chemical, microbiological and biological changes that occur in foods treated with ionizing radiation have been studied. However no single method is universally applicable. Among physical measurements, the leading methods of indentification are electron spin resonance (ESR) spectroscopy and thermoluminescence(TL). ESR is an established non-destructive method for the analysis of free radicals from their traps and TL is the emission of light from irradiated mineral extracts by heating. Viscosity of carbohydrate polymers by causing chain breaks by irradiation, measuring the impedance of potatoes and detection of gases produced radiolytically are promising techniques for identification purposes. Irradiated water-containing foods show significant supercooling when monitored with a differential scanning calorimeter (DSC), which can be applied to identifying irradiated ones.

• ETRI Journal
• /
• 제45권4호
• /
• pp.690-703
• /
• 2023

Multistage amplifiers have become appropriate choices for high-speed electronics and data conversion. Because of the large number of high-impedance nodes, frequency compensation has become the biggest challenge in the design of multistage amplifiers. The new compensation technique in this study uses two differential stages to organize feedforward and feedback paths. Five Miller loops and a 500-pF load capacitor are driven by just two tiny compensating capacitors, each with a capacitance of less than 10 pF. The symbolic transfer function is calculated to estimate the circuit dynamics and HSPICE and TSMC 0.18 ㎛. CMOS technology is used to simulate the proposed five-stage amplifier. A straightforward iterative approach is also used to optimize the circuit parameters given a known cost function. According to simulation and mathematical results, the proposed structure has a DC gain of 190 dB, a gain bandwidth product of 15 MHz, a phase margin of 89°, and a power dissipation of 590 ㎼.

• 대한전자공학회논문지SD
• /
• 제41권5호
• /
• pp.143-152
• /
• 2004

새로운 구성의 저전력 광대역 바이폴라 전류 콘베이어(CCII)를 제안하고 이것을 이용한 유니버셜 계측 증폭기(UIA)를 설계하였다. 설계된 CCII는 정확한 전류 및 전압 전달특성과 낮은 전류 입력단자의 임피던스를 위해 종래의 AB급 CCII의 회로에 적응성 전류 바이어스 회로를 사용하였다. 설계된 UIA는 제안한 2개의 CCII와 4개의 저항기만으로 구성되며, 입력 신호의 선택과 저항기의 사용에 따라, 3가지 종류의 계측 증폭기를 실현할 수가 있다. 시뮬레이션 결과, 제안한 CCⅡ는 2.0Ω의 전류 입력 임피던스를 갖고, 이 CCII를 전압 증폭기로 응용할 때 0에서 50㎑까지의 주파수 범위에서 최대 60㏈의 이득을 갖고 있다는 것을 확인하였다. 또한, -100㎃에서 100㎃까지의 전류 범위에서도 우수한 전류 폴로워 특성을 갖고 있다는 것을 확인하였다. 설계된 UIA는 저항기의 정합에 관계없이 3가지 계측 기능을 갖고 있다는 것을 확인하였다. 완전-차동 전압 계측 증폭기로 사용할 때 0에서 100㎑까지의 주파수 범위에서 40㏈의 전압 이득을 갖고 있다. 공급 전압 ±2.5V에서 CCII와 UIA의 전력 소비는 각각 0.75㎽와 1.5㎽이다.

• 전기화학회지
• /
• 제13권2호
• /
• pp.138-144
• /
• 2010

망간 산화물이 전착된 전기분해용 전극의 전기화학적 특성을 조사하기 위해 펄스 전위차 방법을 이용하여 티타늄 망 표면에 망간 산화물을 전착하였다. 전착된 망간 산화물을 확인하기 위해 EDX 분석과 SEM 분석을 실시하였다. 또한 제조된 전극의 EIS 측정을 실시하여 전기화학적 특성을 관찰하였다. 티타늄 망에 펄스 1cycle의 인가 시간이 증가함에 따라 티타늄 망 표면에 형성되는 망간 입자 크기는 증가 하였으며, 10 ms의 펄스 인가 시간에서 응집이 발생하여 약 100 nm 크기의 망간 산화물 불균일 상이 형성되는 것을 SEM으로 관찰하였다. 다양한 조건으로 제조한 전극들은 EIS 측정을 통해 과전위 부근에서 나타나는 전자이동저항($R_{ct}$, Charge transfer resistance)을 평가하였고, Tafel plot을 이용하여 제조된 전극이 갖는 과전위를 계산하여 전기분해용 전극으로서의 가능성을 모색하였다.

• 한국세라믹학회지
• /
• 제56권5호
• /
• pp.497-505
• /
• 2019

Lanthanum-based transition metal cations containing perovskites have emerged as potential catalysts for the intermediate-temperature (600-800℃) oxygen reduction reaction (ORR). Here, we report a facile acetylacetone-assisted combustion route for the synthesis of nanostructured La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ (LSCF6428) cathodes for intermediate-temperature solid-oxide fuel cells (IT-SOFCs). The as-prepared powder was analyzed by thermogravimetry analysis-differential scanning calorimetry. The powder calcined at 800℃ was characterized by X-ray diffraction, scanning electrode microscopy, energy dispersive X-ray spectroscopy, and Brunauer-Emmett-Teller surface area measurements. It was found that the porosity of the air electrode significantly increased by utilizing the nanostructured LSCF6428 instead of commercial powder. The performance of a single cell fabricated with the nanostructured LSCF6428 cathode increased by 112%, from 0.4 to 0.85 W cm^-2, at 700℃. Electrochemical impedance spectroscopy showed a considerable reduction in the area-specific resistance and activation energy from 133.5 to 61.5 kJ/mol, resulting in enhanced electrocatalytic activity toward ORR and overall cell performance.