• Korean journal of food and cookery science
• /
• v.16 no.6
• /
• pp.577-583
• /
• 2000

The purpose of this study was to investigate the effectiveness of various quality preservative treatments for extending shelf life and maintaining good quality of minimally processed fruit and vegetables produced in Korea. To determine the suitable treatments for delaying quality deterioration, fresh Asian pears and Chinese cabbages were sliced and treated with various quality preservatives (1% CaCl$_2$, 1% NaCl, 3% sucrose, 1% Ca-lactate, 1% vitamin C, 0.05% chitosan ＋1% vitamin C, 0.1% Sporix＋1% vitamin C, hot water (60$\^{C}$), 0.2% L-cysteine), packed with polyethylene film (60㎛-thick), and stored at 4$\^{C}$/0$\^{C}$ or 20$\^{C}$. Various biological and sensory tests were performed to evaluate the quality changes in minimally processed products. Results indicated that Chinese cabbages treated with 1% CaCl$_2$ at 4, and 1% CaCl$_2$ and 1% NaCl at 20$\^{C}$ were most effective in maintaining the quality and minimizing the biochemical changes during storage. For sliced Asian pears, 0.2% L-cysteine and 1% NaCl treatments were effective to reduce browning, and 1% CaCl$_2$ treatment was the most effective to prevent softening during storage at 20$\^{C}$ and 0$\^{C}$. Modified atmosphere packaging of Pleurotus ostreatus and Lentinus edodes had a significantly different shelf life depending on packaging material, packaging thickness and storage temperature. Sealed packaging with polyethylene film (60㎛-thick) for two kinds of mushrooms maintained a good quality with an extended shelf life by 30-50% at 20$\^{C}$ and by 30-130% at 0$\^{C}$. To minimize the quality deterioration which appeared in the condition of polyethylene film packaging, quality preservatives such as KMnO$_4$ and KHSO$_2$＋K$_2$S$_2$O$\_$5/ for SO$_2$ generation were added inside of mushroom packaging. The best condition for maintaining good quality longer was packaging with polyethylene film+SO$_2$ which showed 5080% extended shelf life for both Pleurotus ostreatus and Lentinus edodes at 20$\^{C}$ and 0$\^{C}$.

• Korean Journal of Food Science and Technology
• /
• v.38 no.4
• /
• pp.475-482
• /
• 2006

The quality characteristics and functional properties of fermented soybean by lactic acid bacteria (FSB) were investigated and compared with those of soybean (control) and commercial cheonggukjang Powder (CGP). The crude protein, lipid, and fiber contents of FSB were similar to those in CGP. The vitamin $B_2$ content in FSB (1.4 mg%) was similar to the control (1.3 mg%) whereas it was remarkably low in the CGP (0.2 mg%). The bright yellow color of FSB determined by Hunter's colormeter was quite different from the dark reddish brown color of the CGP. The pH of FSB was the lowest and thee amino-nitrogen was 517.2 mg%, which was higher than that in CGP (468.1 mg%). Glutamic acid, aspartic acid and leucine were the most abundant amino acids. In particular, the increase in the glutamic acid level was noticeable in FSB. The fatty acid compositions of FSB and CGP were similar to the control. However, the sucrose and fructose levels were lower after fermentation but the glucose level was higher. The results of isoflavone analysis by HPLC showed that the levels of daidzein and genistein in FSB were as much as 48.33 and 52.82 mg%, respectively, which is higher than that found in CGP. The DPPH free radical scavenging effects of FSB and CGP were 1.8 times higher an those of the control. The fibrinolytic activity determined by the diameter of the lysed area on the fibrin plate was the most effective in FSB. In conclusion, it is believed that FSB has a similar or higher quality than CGP. Therefore, FSB is expected to be good functional food material.

• Journal of the Speleological Society of Korea
• /
• no.63
• /
• pp.1-8
• /
• 2004

The non-magnetic materials with non-conductive showing high structure dispersity were developed on the base of natural quartz and lava-scoria which was collected from Je-ju island in Korea, and treated by methane-chemical technology those were obtained novel properties of magnetization through the analyzing. Depending on the processing conditions and subsequent applications the materials produced by strong methane-chemical reaction (MCR) in alcohol solution showed concurrently magnetic, dielectric and electrical properties. The obtained magnetic-electrical powders classified by aggregate complex of their features as segnetomagnetics, containing a dielectric material as a carrying nucleus, particularly the quartz on that surface one or more layers of different compounds were synthesized having thickness up to 10～50 nm and showing magnetic, electrical and other properties. It was confirmed in magnetizing process that powders of quartz and lava-scoria produced by MCR were better oil adsorbent as of oleophilic and floating matter on water surface although their specific gravities are comparably more than 1 in quartz or less than unity, as that of water, in lava-scoira. Therefore, it will be Possible and very useful to remove low density and light gravity oil spillage in difficult recovery from sea and inland water contamination spread on water surface, by marine accident and ship sinking accident occurring frequently in recent years, by way of magnetic adsorbent conveyer system in continuous, if it could be built up the mass Production system of water-floating magnetizable oleophilic adsorbent materials with use of iow cost and good Qualify lava-scoria spread on volcano district in Je-ju island. And, there will also be urgent advent of necessity with strong possibility to develop useful applications of various magnetic functional materials include oleophilic adsorbent for removal of sea oil-contaminants and maritime pollutants, and other kinds of various utilities in industrial applications and practical uses of novel functional materials in the fields of environments and health care applications with in deep expectation.

• Korean Journal of Plant Resources
• /
• v.31 no.5
• /
• pp.466-477
• /
• 2018

In this study, the anti-inflammatory activities of the extracts of different parts of Hovenia dulcis such as leaves, stems, and roots were investigated. Among them, the roots extract (RE) showed the most potent suppressive effect against pro-inflammatory mediators in LPS-stimulated mouse macrophage cells. RE induced dose-dependent reduction of inducible nitric oxide synthase (iNOS) and cyclooxygenase-2 (COX-2) and concomitantly reduced the production of NO and $PGE_2$. Additionally, pre-treatment with RE significantly suppressed the production of inflammatory cytokines, such as tumor necrosis $factor-{\alpha}$ ($TNF-{\alpha}$), interleukin $(IL)-1{\beta}$, and IL-6, as well as mRNA levels. Moreover, phosphorylation of mitogen-activated protein kinases (MAPKs) and nuclear translocation of nuclear factor-kappa B (NF-kB) were also strongly attenuated by RE in RAW264.7 cell. Furthermore, RE induced HO-1 expression through nuclear translocation of nuclear factor E2-related factor 2 (Nrf2) and increase HO-1 activity in RAW264.7 macrophages. Therefore, these results indicate that RE strongly inhibits LPS-induced inflammatory responses by blocking NF-kB activation, inhibiting MAPKs phosphorylation, and enhancing HO-1 expression in macrophages, suggesting that RE of H. dulicis and a major component, 27-O-protocatechuoylbetulinic acid could be applied as a valuable natural anti-inflammatory material.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.1
• /
• pp.109-120
• /
• 2014

In this study, the extracts of Inula britannica var. chinensis (I. britannica) flower were extracted at three different temperatures (room temperature, $45^{\circ}C$, and $65^{\circ}C$) and their anti-aging effects were studied. Before investigating anti-aging effects of the extracts, their cytotoxicity was tested on B16F10, Hs683, and HaCaT cells. All extracts showed no cytotoxicity at the concentration less than 0.1% (v/v). Melanin synthesis inhibitory activities in B16F10 cells and reverse transcriptase polymerase chain reaction (RT-PCR) in Hs683 and HaCaT cells were used to see their anti-aging effects. The room temperature extract at 0.1% showed 24.5% melanin synthesis inhibition, which was better than the $45^{\circ}C$ and $65^{\circ}C$ extracts. In addition, expression rates of the room temperature extract at 0.1% on HAS-1, HAS-2, and HAS-3 related to hyaluronan synthase genes were 123.3%, 137.8%, 133.2%, respectively. which were higher than reference material of L-ascorbic acid. Expression rates of the $45^{\circ}C$ extract at 0.1% on TNF-${\alpha}$, COX-2, and IL-$1{\alpha}$, which are inflammatory related genes, was suppressed to 30.3%, 12.8%, 25.7%, respectively. It was better in anti-in flammatory effect than the room temperature and $65^{\circ}C$ extracts. As results, we showed that I. britannica var. chinensis flower extarcts decreased melanin production and expression of inflammatory related genes and increased the expression rate of hyaluronan synthase genes. Thus, it is believed that the extracts affect anti-aging effects of skin through whitening, moisturizing, and anti-inflammatory processes and could be applicable to cosmetics as a functional cosmetic ingredient.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.103-109
• /
• 2016

Polyethylene pipes has useful benefits which are anti-corrosive and flexible material, so it is used to gas pipes but also class 3 water pipes of nuclear power plant, process pipes of petrochemical plant and chemical plant. So the usage of polyethylene pipes is widely increased. But it has been limited for the usage of polyethylene, because it can not be directly detected to fusion joints by using non destructive evaluation. Polyethylene pipes are connected by two methods, one is butt fusion and the other is electrofusion. Butt fusion is widely used to connecting the pipes. It is proposed to method for determining the reliability of joints in this study that is detection of the melt flow zone at fusion joints. In this study, middle density polyethylene is used, outside diameter of the test specimen is 225mm and thickness is 20.5mm. Speed of ultrasonic of this test specimen is 2,200m/s. Test specimens were fabricated by varying the heating time which means from 0% to 130% applying time through heating plate to polyethylene for detecting melt flow zone. Also 4 additional test specimens were made, one was made that not scrapping attached surface of pipes but applying 100% of the proper heating time and the others were made to include of soil, gravel and vinly tape paper at fusion joints, that were also applied 100% of proper heating time. Ultrasonic testing to measure the melt flow zone of 20 test specimens was conducted by using 3.5MHz and 5.0MHz ultrasonic probes and melt flow zone measuring was conducted to three times at different point to one specimen. To differentiate the melt flow zone signal, post image processing was equally conducted to all test results and image levels, contrast, sharpen, threshold were adopted to all teat results and the test results were displayed gray scale. From the results, for the shorter heating times the reflection area of multiple echo have been increased, so the data was obtained from the position where it can be eliminated as much as possible. At 80% of proper heating time(168 sec.), the signal of melt flow zone was obtained clearly, so measuring could be conducted. From 7% of proper heating time(15 sec.) to shorter heating times. we could not obtain the signal because test specimen was not fused. From the result, we can verify that measuring of melt flow zone by using phased array ultrasonic imaging method is possible. And we can verify to complete and incomplete butt fusion by measuring the melt flow zone.

• Journal of the Korean Society of School Health
• /
• v.12 no.2
• /
• pp.357-375
• /
• 1999

The purpose of this study is to find out methods to control, regulate and prevent sexual violence and provide guidelines for sex education in middle school. This study was conducted to examine factors in relation to sexuality, attitudes toward women, experience of sexual contact, frequencies and kinds of pornography with which they had contact, and sex education. For the data collection, a survey was conducted from September 25 to October 1, 1997 by using prepared questionnaires. Questionnaires were given to 503 students from three different kinds of middle schools in Seoul, Boys, Girls, and Coeducation schools. The data analyses used a PC-SAS. Each item was examined by frequencies and percentage. To compare Boys with Girls, I applied a T-test. In addition, with the kinds of school type, I applied anANOVA, ${\chi}^2$. Moreover, For investigating and analyzing each category, I categorized knowledge and attitude of sexuality, with precautionary measures of sexual violence. After that I applied T-test, ANOVA, and a Pearson's correlation for each category. The instruments of this study consisted of 9 domains. (1) General characteristics of the respondents (2) 9 questions about the interaction between he/she and his/her parent. (3) 12 questions, concerning A Scale for Attitudes of Adolescents Toward women(AWSA). (4) 26 questions related to sexual knowledge. (5) 25 questions about sexual attitude (6) strategies for prevention of sexual violence-33 questions (7) 5 questions related to sexual behavior (8) the experience of contact with pronography. (9) the experience of sex-education. The major results were summarized as follows; 1. Like many researches, This study shows that the girls are more eqalitarian than boys. The girls mean ($40.90{\pm}3.67$) is significantly higher than boys ($34.72{\pm}3.77$). Most Koreans have believed that there are many differences between men's roles and women's ones, because of confucianism which had been implied in most thought and ideas since the Lee dynasty. Therefore, the result is not surprising at all. 2. Most students answered correctly the questions of sexual knowledge. The girl's score was higher ($Mean{\pm}SD$ : $48.88{\pm}2.39$) than the boys' ($Mean{\pm}SD$ : $46.95{\pm}3.90$)(p 0.001). Nevertheless, the hypothesis that sexual knowledge influences sexual attitude and its behavior was rejected. 3. When twenty-five questions were asked about sexual attitude, the girl students investigated were found to have a more propre sexual attitude than that of the boys. A significant difference was found between boys and girls(p=0.001). The result shows that a person who has more experience in viewing pornography and who smokes will have a more distorted view of sexuality. 4. There are many students who have experienced of sexual contact. They need to take a sex education program about contraception and prevention of sexually transmitted diseases. Systematic and concrete sex education is one way to lead them to proper sexual behavior. 5. Most respondents rejected stereotyped attitudes towards women. Boys, however, were more likely to accept stereotypes of Women. The girl's mean($Mean{\pm}SD$ : $40.90{\pm}3.67$) is higher than the boys($Mean{\pm}SD$ : $34.72{\pm}3.77$)(p=0.0001). 6. Many boys ignored the rules for prevention of sexual violence. A boy or a girl who has more experience of sexual contact over kiss and sex-typed neglected the rules, too(p=0.001). Today, there is increasing juvenile delinquency related to sexuality. This study provided the basic material for a preventive education system. I believe that a systematic and concrete sex education system can be helpful for adolescents and promote their responsibility as well as cultivate morality about sexuality. As a result, juvenile delinquency can be decreased. This study is basically aimed to provide information for a prevenative education system of sexual violence. Further research is recommended to evaluate programs in schools.

• Journal of Chest Surgery
• /
• v.35 no.5
• /
• pp.365-368
• /
• 2002

Background: Coronary artery bypass grafting(CABG) imposes large amount of medical costs, which are greatly affected by the surgical approach, quality of perioperative care and associated co-morbidities. Recently, off-pump CABG(OPCAB) has been introduced and performed with increasing frequency. To evaluate the efficacy of OPCAB in view of financial impact, we analyzed the costs and medical resources of OPCAB and compared with conventional CABG. Material and Method: From January 1998 to July 1999, 184 patients underwent CABG operation; 111 patients with OPCAB(group I) and 73 patients with conventional CABG(group II). We prospectively collected clinical data including risk factors and retrospectively reviewed the hospital resources. Result: Preoperative parameters including risk factors, postoperative mortality, morbidity and length of hospital stay were not different between the two groups, Duration of stay in the intensive care unit(ICU) (51.3 vs 128.3 hours, p<0.01) and ventilator, support time(14.9 vs 56.2 hours, p<0.01) were significantly shorter in the OPCAB group. Total hospital coats were 17,220,000 add 21,250,000(Korean Won) in group I and II, respectively(p<0.01). There were significant differences in operation fee, costs for operative materials, transfusion and diagnostic radiology between two groups. In group I, all the resources except diagnostic radiology were significantly decreased compared with group II. Conclusion: OPCAB has a beneficial effect on hospital charge and resource utilization. Shorter duration of the ICU stay and ventilatory support time may reduce the total hospital costs.

• Journal of Chest Surgery
• /
• v.35 no.11
• /
• pp.792-798
• /
• 2002

Although there is a controversy on the optimal timing for active infective endocarditis(IE), recently good results of early surgical intervention have been published. Herein, we analyzed the results of surgery for active IE according to the duration of preoperative antibiotic treatment. Material and Method : Retrospectively, we analyzed 51 patients who underwent operation for active IE at the department of thoracic and cardiovascular surgery of Samsung medical center from Mar. 1995 to Oct. 2001. Male to female ratio was 39:12, mean age of the patients was 44.5$\pm$17.8 years(range : 13~74). Infected valves were mitral valve in 17(33.3%), aortic valve in 15(29.4%), mitral and aortic valve in 12(23.5), and tricuspid valve in 5(9.8%) cases. Among them, prosthetic valve endocarditis was present in 10(19.6%) cases. Infecting organism was Staphylococcus in 19(37.3%), Streptococcus in 17(33.3%), Enterococcus in 3(5.9%), fungus in 3(5.9%), and other bacteria in 5(9.8%) cases. Organism was not isolated in 6(11.8%) cases, and two organisms were isolated in 4(7.8%) cases. Dividing these patients into two groups according to the duration of preoperative antibiotic treatment(A: less than 7 days, B: more than 8 days), we compared the surgical results between the two groups. Result : There were 16 cases in group A and 35 in group B. Annular reconstruction was performed in 10(62.5%) cases in group A and 10(28.6%) cases in group B, which has statistically significance(p＜0.05). There was one early death in group B. Forty nine patients(96.1%) except two were followed up with mean follow-up duration of 28.7 $\pm$ 23.6 months. Endocarditis was recurred in one in group A, and two in group B. Three late deaths occurred in group B. Recurrence rate and survival were not statistically different between the two groups. Conclusion : Early surgery for active IE showed good results as the result of that which was performed after prolonged antibiotic treatment; therefore, we believe that early surgery for active If could effectively eradicate the infection.