• Structural Engineering and Mechanics
• /
• v.49 no.3
• /
• pp.285-296
• /
• 2014

Material damping affects the dynamic behaviors of engineering structures considerably, but up to till now little research is maintained on influence factors of material damping. Based on the damping-stress function of steel, the material damping of steel beams is obtained by calculating the stress distribution of the beams with an analytical method. Some key influence factors of the material damping, such as boundary condition, amplitude and frequency of excitation, load position as well as the cross-sectional dimension of a steel beam are analyzed respectively. The calculated results show that even in elastic scope, material damping does not remain constant but varies with these influence factors. Although boundary condition affects material damping to some extent, such influence can be neglected when the maximum stress amplitude of the beam is less than the fatigue limit of steel. Exciting frequency, load position and cross-section dimension have great effects on the material damping of the beam which maintain the similar changing trend under different boundary conditions respectively.

• Food Science of Animal Resources
• /
• v.31 no.2
• /
• pp.215-223
• /
• 2011

Surimi-like samples were divided into four groups (C, surimi-like material made from Alaska Pollack with all cryoprotectant ingredients; T1, surimi-like material made from chicken breast with sugar and a sorbitol-free cryoprotectant; T2, surimi-like material made from chicken breast with a sugar-free cryoprotectant; T3, surimi-like material made from chicken breast with all cryoprotectant ingredients). Water and protein content were lower in Alaska Pollack surimi-like material (C) than those in chicken breast surimi-like material. Centrifuge loss and cooking loss were higher in C than those in chicken breast surimi-like material. Lipid oxidation (thiobarbituric acid reactive substances) was lower in T3 than others during storage. In a sensory evaluation, overall acceptability was significantly higher in C than those in other samples during storage. As a result, we found that the raw material composition (Alaska Pollack or chicken breast) had a large influence on the physico-chemical characteristics and quality of surimi-like materials, whereas cryoprotectant composition may have less influence on the physico-chemical characteristics and quality of surimi-like materials.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.31-37
• /
• 2005

This paper presents an experimental study on vibration characteristics of an automotive roof with damping material. The goal of the study is to extract modal parameters(natural frequency, loss factor, and mode shape) of automotive roof with damping materials treatment. To determine the effective positions and thickness of the damping material on a roof, vibration tests have been carried out for six cases; an aluminum plate with damping material on maximum strain energy positions, and an aluminum plate with damping material on nodal lines. From the result of aluminum plate, it is found that the damping material should be placed on the location with maximum strain energy part. For the automotive roof, patches of constrained damping material, which has two different density, have been attached to the positions of the maximum strain energy with four kinds of thicknesses. This paper shows that the proper positioning of the damping material is very important and the effective thickness is about twice that of the roof panel.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.20 no.1
• /
• pp.18-26
• /
• 2013

Purpose: The purpose of this study was to analyze the history of exposure to obscene material, and examine sexual attitudes and intercourse experience in order to develop an effective program for university students. Method: The data were collected in May, 2012 from 385 students attending 3 universities in Korea. An independent t-test and ANOVA were used to determine the differences with regard to sexual attitudes and intercourse experience according to general characteristics and history of exposure to obscene material. Results: Sexual attitudes significantly differed according to timing of first exposure to obscene material (p<.001). Intercourse experience was significantly different according to timing of first exposure to obscene material (p=.016) and type of exposure to obscene material (p=.032). There was a negative correlation between first exposure to obscene material and sexual attitudes (p<.001), and a positive correlation between first exposure to obscene material and intercourse experience (p=.017). Conclusion: Results of this study indicate that history of exposure to obscene material should be considered as an important variable in managing the sexual health of university students.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.89-96
• /
• 2007

A volume integral equation method (VIEM) is applied for the effective analysis of plane elastostatic problems in unbounded solids containing single isotropic inclusion of two different shapes considering composite fiber volume fraction. Single cylindrical inclusion and single square cylindrical inclusion are considered in the composites with six different fiber volume fractions (0.25, 0.30, 0.35, 0.40, 0.45, 0.50). Using the rule of mixtures, the effective material properties are calculated according to the corresponding composite fiber volume fraction. The analysis of plane elastostatic problems in the unbounded effective material containing single fiber that covers an area corresponding to the composite fiber volume fraction in the bounded matrix material are carried out. Thus, single fiber, matrix material with a finite region, and the unbounded effective material are used in the VIEM models for the plane elastostatic analysis. A detailed analysis of stress field at the interface between the matrix and the inclusion is carried out for single cylindrical or square cylindrical inclusion. Next, the stress field is compared to that at the interface between the matrix and the single inclusion in unbounded isotropic matrix with single isotropic cylindrical or square cylindrical inclusion. This new method can also be applied to general two-dimensional elastodynamic and elastostatic problems with arbitrary shapes and number of inclusions. Through the analysis of plane elastostatic problems, it will be established that this new method is very accurate and effective for solving plane elastic problems in unbounded solids containing inclusions considering composite fiber volume fraction.

• Journal of the Korean Society of Costume
• /
• v.65 no.3
• /
• pp.117-130
• /
• 2015

The purpose of this study is to investigate the 'sexy look' of the Paris Haute Couture evening dresses of the past 10 years from 2005 to 2014. The results are as follows: According to the occurrence frequency analysis of the fashion images of sexy look evening dress, the type of sexy look that appeared the most is the romantic sexy look, followed by erotic sexy look, ethnic sexy look, minimal sexy look and avant-garde sexy, respectively. According to the design component-specific analysis of evening dress for each Haute Couture house, 7 Haute Couture houses have used H-line silhouette over the past 10 years, each H-line silhouette being different. In terms of material, Valentino, Elie Saab, Givenchy, Chanel and Dior have shown a trend of favoring see-through material, Gaultier and Armani showed a lot to combine different materials. In terms of color, Valentino, Chanel, Dior, Gaultier, Armani have shown a general trend in the last 10 years to express sexy look by using attractive and mystical black tones, Elie Saab has shown skin color a lot by using brown family colors and Givenchy has used white family colors. According to the design components analysis for each sexy look fashion image, the H-line silhouette showed the most frequency to represent sexy looks. In terms of material, avant-garde sexy look, ethnic sexy look and minimal sexy look showed a lot to combine different materials to express sexy looks, but erotic sexy look and romantic sexy look are characterized by using thin see-through material. As for the color, black series has been most represented in the last 10 years for the Haute Couture evening dress sexy look.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1183-1188
• /
• 2008

The present study aimed to determine the effects of different storage materials and storage period on some hatchability traits of Japanese quail (Coturnix coturnix japonica) eggs. A total of 32 male and 102 female quail (twelve weeks of ages) were housed in multiple-bird cages. Eggs laid were divided into three groups with respect to the period of storage (I = 1st, 2nd and 3rd days, II = 6th, 7th and 8th days, III = 12th, 13th and 14th days) prior to incubation. A total of 816 eggs was stored in 3 different storage environments during each storage period (B = no use of any storage material, P = use of perlite, H = use of hay) and kept in environmental conditions, where the temperature was $21^{\circ}C$ and relative humidity was 75%, prior to incubation. Statistical analyses were performed after the exclusion of values pertaining to non-fertile eggs (190 eggs) from the data set. The fertility rate of the eggs in the experiment was 76.7%. In the present study, the influence of storage material and different storage periods on egg weight loss were found to be statistically significant (p<0.01). Upon the comparison of hatchability of fertile eggs values, the influence of storage material was determined to be significant (p<0.05), and the influence of storage period was demonstrated to be significant (p<0.01). The storage materials used were determined not to have any influence on early and late embryonic death rates. Perlite was concluded to be safe for use in the storage of hatching eggs. The extension of the storage period (more than 8 days) resulted in decreased hatchability values of fertile eggs in each group.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.10
• /
• pp.788-792
• /
• 2010

The yttrium-barium-copper-oxide (YBCO) coated conductor, which supplement the fault of the existing superconducting current-limit materials YBCO thin film, bismuth-strontium-calcium-copper-oxide(BSCCO) wire and bulk, has been improved its mechanical weakness and has high index; hence, after quench YBCO coated conductor could limit the fault current effectively because of fast resistance occurrence speed. Furthermore, it has wide applicable area as an current limit material because it shows different resistance occurrence tendency by the thickness and kind of stabilization material sputtered on the superconducting layer. Therefore, many researchers are carrying out the study of application of YBCO coated conductor to superconducting fault current limiter (SFCL) for making high quality current limit element, based on resistance type. On the other hand, the study for other type except resistance type has been rarely conducted for the application of YBCO coated conductor to SFCL as an current limit element. Consequently, in this study, YBCO coated conductor with different stabilization layer Cu and Stainless steel, is applied to SFCL using iron core and coil, and examine the many index points as an current limit element, such as current limit characteristic, the tendency of resistance occurrence, response time, the temperature trend for stability.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.414-423
• /
• 2006

Many construction projects adopt grouting technology to prevent the leakage of groundwater or to improve the shear strength of the ground. Recognition as a feasible field procedure dates back to 1925, Since then, developments and field use have increased rapidly. According to improvement of grout materials, theoretical study on grout penetration characteristics is demanded. Fluid of grout always tends to flow from higher hydraulic potential to lower and the motion of grout is also a function of formation permeability. Viscosity of grout is changed by chemical action while grout moves through pores. Due to the increment of viscosity, permeability is decreased. Permeability is also reduced by grout particle deposits to the soil aggregates. In this thesis, characteristics of new cement grout material that is developed recently is studied: injectable volume of new grout material is tested in two different sizes of sands, and the method to calculate injectable volume of grout is suggested with consideration of change in viscosity and clogging phenomena. The calculated values are compared with injection test results. Viscosity of new grout material is found to be an exponential function of time. And lumped parameter $\theta$ of new grout material to be used for assessing deposition characteristics is estimated by comparing deposit theory with injection test results considering different soil types and different injection pressure.

• Tribology and Lubricants
• /
• v.34 no.6
• /
• pp.254-261
• /
• 2018

In order to reduce resistance torque and energy loss, minimizing friction between race surface and rolling elements of a bearing is necessary. Recently, to reduce friction in bearing element, solid lubricant coating for the bearing raceway surface has been receiving much attention. Considering the operating conditions of real bearings, verifying the effect of solid lubricant coatings under extreme conditions of high load that is more than 1 GPa is necessary. In this study, we evaluated the friction and wear characteristics of SUJ2 bearing steels deposited by carbon-based coatings (Si-DLC, ta-C), $MoS_2$ and graphite. In case of $MoS_2$ and graphite coatings, different surface treatments were applied to the coatings to verify the effect of surface treatment. A pin-on-disc type tribotester was used to evaluate the tribological characteristics of the coatings. It was possible to quantitatively estimate the friction and wear characteristics of solid lubricant under dry and lubrication conditions. The carbon-based coatings improved the friction and wear properties of SUJ2 bearing steels under the high load condition, but $MoS_2$ and graphite coatings were not suitable for high load conditions due to its low hardness. Different friction and wear behaviors were found for different substrate surface treatment method. Also, it was confirmed that solid lubricant coatings had a more positive effect than just applying the lubricant for improving the tribological characteristics.