• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1895-1899
• /
• 2012

Formulation of finite difference method for analyzing consolidation were carried out. It can be seen that the differences in settlement with time obtained by FDM and Terzaghi method are diminished by fine discretization of time increment. Excess pore pressures predicted by the derived finite difference equation were same as those calculated by Olson's method. Predicted time-settlement behavior from the derived finite difference method were almost same as those calculated by Terzaghi's method and Olson's method. Analysis results obtained from the assumed multi-step time dependent loading are thought to be reasonable.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.572-575
• /
• 2008

Two-dimensional multiphase flows due to density difference such as the Rayleigh-Taylor instability problem and the droplet splash are simulated by an in-house solution code(PowerCFD). This code employs an unstructured cell-centered method based on a conservative pressure-based finite-volume method with interface capturing method in a volume of fluid(VOF) scheme for phase interface capturing. The present results are compared with other numerical solutions found in the literature. It is found that the present code simulates complex free surface flows such as multiphase flows due to density difference efficiently and accurately.

• The Journal of Information Systems
• /
• v.14 no.3
• /
• pp.117-122
• /
• 2005

This paper presents a method for detecting scene changes in video sequences, in which the $chi^{2}$-test is modified by imposing weights according to NTSC standard. To automatically determine threshold values for scene change detection, the proposed method utilizes the frame differences that are obtained by the weighted $chi^{2}$-test. In the first step, the mean and the standard deviation of the difference values are calculated, and then, we subtract the mean difference value from each difference value. In the next step, the same process is performed on the remained difference values, mean-subtracted frame differences, until the stopping criterion is satisfied. Finally, the threshold value for scene change detection is determined by the proposed automatic threshold estimation algorithm. The proposed method is tested on various video sources and, in the experimental results, it is shown that the proposed method is reliably estimates the thresholds and detects scene changes.

• The Journal of Fisheries Business Administration
• /
• v.48 no.4
• /
• pp.11-25
• /
• 2017

The purpose of the study is to analyze the status and trend of less favored condition of fishing village in Korean island regions using the census of agriculture, forestry and fisheries. The less favored condition was measured as the difference in accessibility to major services and in fishery sales and resident infrastructure, applying the difference-in-difference method and propensity score matching method respectively. The result shows that access to major services has improved in island area between 2010 and 2015, implying that related policies such as the island comprehensive development project have been successful to some extent. However, some educational facilities, cultural facilities, and health facilities still have low inaccessibility and fishery sales are also significantly lower than in general area. This suggests that it is necessary to maintain related policies like the direct payment of fisheries.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.2 s.28
• /
• pp.97-110
• /
• 1998

The numerical damping and dispersion error characteristics associated with difference schemes and a panel shift method used for the calculation of steady free surface flows by a panel method are an analysed in this paper. First, 12 finite difference operators used for the double model flow by Letcher are applied to a two dimensional cylinder with the Kelvin free surface condition and the numerical errors with these schemes are compared with those by the panel shift method. Then, 3-D waves due to a submerged source are calculated by the difference schemes, the panel shift method and also by a higher order boundary element method(HOBEM). Finally, the waves and wave resistance for Wigley's hull are calculated with these three schemes. It is shown that the panel shift method is free of numerical damping and dispersion error and performs better than the difference schemes. However, it can be concluded that the HOBEM also free of the numerical damping and dispersion error is the most stable, accurate and efficient.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.6
• /
• pp.782-786
• /
• 1994

Integrated finite difference method (IFDM) is used to solve one dimensional free oscillation problem in the coastal area. To evaluate the solution accuracy of IFDM in free oscillation analysis, two finite difference equations based on area discretization method and point discretization method are derived from the governing equations of free oscillation, respectively. The difference equations are transformed into a generalized eigenvalue problem, respectively. A numerical example is presented, for which the analytical solution is available, for comparing IFDM to conventional finite difference equation (CFDM), qualitatively. The eigenvalue matrices are solved by sub-space iteration method. The numerical results of the two methods are in good agreement with analytical ones, however, IFDM yields better solution than CFDM in lower modes because IFDM only includes first order differential operator in finite difference equation by Green's theorem. From these results, it is concluded that IFDM is useful for the free oscillation analysis in the coastal area.

• Journal of Technologic Dentistry
• /
• v.18 no.1
• /
• pp.5-13
• /
• 1996

Among investment for dental casting, we selected 4 kinds of investment(2 Gypsum-bonded and 2 Phosphate-bonded) and prepard 120 specimen by dividing into two cast of using Ring and Ringless case from $0^{\circ}C$ to $30^{\circ}C$ at interval of $10^{\circ}C$ to invest in fluence on the fitness of casting body according to the liquid temperature of Gypsum-bonded and Phosphate-bonded investment. The result was as follows; 1. Gypsum-bonded investment showed best fitness at $30^{\circ}C$ representing difference of singnificance in order of $20^{\circ}C$, $10^{\circ}C$, and $0^{\circ}C$, From the difference of investment, Deguvest was proved superior than Cristobalite. 2. Phosphate-bonded investment showed no severe difference at $10^{\circ}C$ and $20^{\circ}C$, but showed better fitness at $10^{\circ}C$, representing difference of significance in order of $0^{\circ}C$, $30^{\circ}C$, difference of significance was shown between investment also. 3. In Ringless investing method, there were no difference of significance in Deguvest CF and Unovest. 4. When using a Ring with a Sheet of asbestos liner installed, there was some difference of significance representing superiority of Ringless investing method.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.5
• /
• pp.15-20
• /
• 2002

In this research, the finite difference lattice Boltzmann method(FDLBM) is used to analyze gravity currents in the lock exchange configuration that occur in many natural and man-made situations. At a lock those are seen when a gate is suddenly opened, and, in the atmosphere, when the thunderstorm outflows make a cold front. At estuaries in the ocean, the phenomenon is found between fresh water from a river and salt water in the sea. Since such interesting phenomena were recognized, pioneers have challenged to make them clear by conducing both experiments and analysis. Most of them were about the currents of liquid or Boussinesq fluids, which are assumed as incompressible. Otherwise, the difference in density of two fluids is small. The finite difference lattice Boltzmann method has been a powerful tool to simulate the flow of compressible fluids. Also, numerical predictions using FDLBM to clarify the gravity currents of compressible fluids exhibit all features, but typically observed in experimental flows near the gravity current head, including the lobe-and-cleft structure at the leading edge.

• Culinary science and hospitality research
• /
• v.6 no.1
• /
• pp.103-121
• /
• 2000

All the food including Korean food is made by boiling preparing raw materials food. and to know how to cook correctly is the basis to cook delicious food. For mankind, finding out fire was the source of enormous change in the development of food culture. I have investigated the difference in cooking Korean style & Western style, by using fire, and known that there is a little difference between two methods except for cooking method by food. Preferably there is a wide difference by combinations of raw materials and cooking method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.11
• /
• pp.1809-1816
• /
• 2020

Objective: This study was conducted to evaluate the effects of inclusion level and amino acid (AA) supplementation on energy values of soybean oil (SO) as determined by difference method or regression method when fed to growing pigs. Methods: Thirty-six barrows (initial body weight: 28.0±1.3 kg) were randomly assigned to one of 6 dietary treatments, which included 2 control diets formulated using a basal diet with or without AA supplementation, and 4 experimental diets with 5% or 10% SO addition in the 2 control diets, respectively. All pigs were individually housed in metabolism crates for 19 d, and during the last 5 d, total urine and feces production were collected. The nutrient digestibility in diets and the digestible energy (DE) and metabolizable energy (ME) values of SO were determined using the difference method and the regression method, respectively. Results: Our results showed that there were no interaction effects (p>0.05) between AA supplementation and SO inclusion levels on energy values of SO and dietary nutrient digestibility. The DE and ME values of SO determined by the difference method were not affected (p>0.05) by AA supplementation, however, the ME value of SO increased (p<0.05) as the inclusion level of SO increased. Moreover, the energy values of SO determined using the regression method were close to those determined using difference method with 10% SO inclusion, but were greater than those obtained using difference method with 5% SO inclusion. Conclusion: We concluded that the DE and ME values of SO increased with the inclusion level but were not affected by AA supplementation in the range of 0% to 10%. The difference method can substitute for the regression method to determine the DE and ME values of SO when the inclusion level is 10%, but not at 5% inclusion level.