• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.8
• /
• pp.537-544
• /
• 2017

The purpose of this study is to analyze the flow characteristics when a staggered hollow fiber membrane module is modeled as a porous medium. The pressure-velocity equation was used for modeling the porous medium, using pressure drop data. In terms of flow characteristics, we compared the case of the "porous medium" when the membrane module was modeled as a porous medium with the case of the "membrane module" when considering the original shape of the membrane module. The difference in pressure drop between the "porous medium" and "membrane module" was less than 0.6%. However, the maximum flow velocity and mean turbulent kinetic energy of the "porous medium" were 2.5 and 95 times larger than those of the "membrane module," respectively. Our results indicate that modeling the hollow fiber module as a porous medium is useful for predicting pressure drop, but not sufficient for predicting the maximum flow velocity and mean turbulent kinetic energy.

• The Journal of Engineering Geology
• /
• v.12 no.2
• /
• pp.167-178
• /
• 2002

Properties of discontinuity for Seoul Granite in northeastern part of Seoul City were analyzed by dividing structural domains into Surak and Bulam Mtn. areas. Important parameters measured among several engineering properties of a rock during tunnel excavation and road construction are as follows: 1) Orientation of joint, 2) joint spacing, 3) joint density, and 4) uniaxial compressive strength. Orientation, spacing, and density of joints can be directly measured during field investigation using scanline survey, circle-inventory method, and window survey. Uniaxial compressive strength of the rock was calculated by a simple correlation equation although it is originally necessary to prepare core samples in measuring it. Major orientations of joints measured from both areas are 3 sets of joints with different orientations. In other words, they are 2 sets of orthogonal joint and 1 set of sheet joint that is dipping at low angle, and have very similar orientations in both areas. Joint densities in both areas range from 0.039 and 0.066/cm, and average joint length are between 1.30 and 4.52m. Average joint spacing also has values from 10.3cm up to 59.6cm, and shows significant difference along specific orientation of scanlines measured. Values of uniaxial compressive strength calculated on the basis of Schmidt hammer rebound values range from 217 to 335 MPa, which indicates very strong rock type by classification of wall strength.

• Analytical Science and Technology
• /
• v.10 no.1
• /
• pp.66-74
• /
• 1997

Influence of the axial dispersion on immobilized enzyme catalytic bed was investigated in order to examine the kinetic behavior of the biocatalysis. The enzyme employed in this study was the tyrosinase(EC 1.14.18.1) immobilized on carbon support : this system requires two substrates of phenol and oxygen. This enzyme has potential application for phenol degradation in waste water. A simulated reactor was a packed-bed reactor of 2.54cm in diameter and 10cm long, loaded with the immobilized carbon particle with an average diameter of $550{\mu}m$. A phenol feed in the strength of 55.5mM(5220ppm) was used to observe the behavior of the immobilized enzyme column at three different dissolved oxygen levels of 0.08445mM(2.7ppm), 0.1689mM(5.4ppm) and 0.3378mM(9.5ppm) with the flow rates in the range of 60(1mL/s) to 180mL/min(3mL/s). Examination of the Biot number and Damkolher numbers of the immobilized system enables us to eliminate the contribution of external mass transfer to set of differential equations derived from the dispersion model. Solution of the equation was finally obtained numerically with the application of the Danckwert boundary conditions and the assumed zero-and first order rates on the non-linear two substrate enzyme kinetics. Higher conversion of phenol was observed at the low flow rates and at the higher oxygen concentration. Comparison of axial dispersion and plug flow model showed that no detectable difference was observed in the column outlet conversion between the axial and the plug flow models which was in complete agreement with the previous studies.

• Journal of Broadcast Engineering
• /
• v.13 no.2
• /
• pp.222-235
• /
• 2008

Recently, as growing of high definition media services like HDTV and IPTV, fast moving picture manipulation techniques need to meet what those services require. Especially, a fast reduced-size image extracting method is required in the areas of video indexing and video summary Conventional DC image extracting methods, however, can't be applied to H.264/AVC streams since a spatial domain prediction scheme is adopted in H.264/AVC intra mode. In this paper, we propose a theoretical method for extracting a thumbnail image from an H.264/AVC intra frame in the frequency domain. Furthermore, the proposed scheme can extract the thumbnail very fast since all operations are applied to transform coefficients directly, after a general equation for the thumbnail extraction in nine H.264/AVC intra prediction modes is introduced, an LUT(Look Up Table) for each mode is designed. Through the implementation and performance evaluation, while the subject quality difference between the output of our scheme and a conventional output is negligible, the former can extract the thumbnail faster then the latter by up to 63%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.4
• /
• pp.222-229
• /
• 2005

A simplified one-dimensional model STELLA was used to predict soil water movement in lllinois corn fields using soil water balance sheets. It offered the potential to increase understanding of soil nitrate and agrochemical leaching process. The model accounted for aU possible annual inputs and outputs of water from a closed ecosystem as represented by corn fields. Water inputs included precipitation, while outputs included runoff, transpiration, evaporation and drainage. To run the model required daily inputs of two climatic data measurements such as daily precipitation and pan evaporation. Vertical water flow through the soil profile was calculated with first order equation including the difference in hydraulic conductivity and matric potential at the various soil types. The output results included daily changes of water content in the soil layers and daily amount of water losses including run-off, percolation, transpiration. This model was verified using Illinois corn field data for the soil water content measured by neutron scattering methods through 1992 to 1994 growing seasons. Approximately 22 to 78% of simulated water contents agreed with the measured values and their standard deviation, depending on soil types, whereas 30 to 70% of simulated water values agreed with the measured values and their standard deviations depending on soil layers.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.474-481
• /
• 2007

With population growth, industrialization, and urbanization within the watershed, the hydrologic response changed dramatically, resulting in increases in peak flow with lesser time to peak and total runoff with shortened time of concentration. Infiltration is directly affected by initial soil moisture condition, which is a key element to determine runoff. Influence of the initial soil moisture condition on hydrograph analysis should be evaluated to assess land use change impacts on runoff and non-point source pollution characteristics. The Long-Term Hydrologic Impact Assessment (L-THIA) model has been widely used for the estimation of the direct runoff worldwide. The L-THIA model was applied to the Little Eagle Creek (LEC) watershed and Its estimated direct runoff values were compared with the BFLOW filtered direct runoff values by other researchers. The $R^2$ value Was 0.68 and the Nash-Sutcliffe coefficient value was 0.64. Also, the L-THIA estimates were compared with those separated using optimized $BFI_{max}$ value for the Eckhardt filter. The $R^2$ value and the Nash-Sutcliffe coefficient value were 0.66 and 0.63, respectively. Although these higher statistics could indicate that the L-THIA model is good in estimating the direct runoff reasonably well, the Antecedent Moisture Condition (AMC) was not adjusted in that study, which might be responsible for mismatches in peak flow between the L-THIA estimated and the measured peak values. In this study, the L-THIA model was run with AMC adjustment for direct runoff estimation. The $R^2$ value was 0.80 and the Nash-Sutcliffe coefficient value was 0.78 for the comparison of L-THIA simulated direct runoff with the filtered direct runoff. However there was 42.44% differences in the L-THIA estimated direct runoff and filtered direct runoff. This can be explained in that about 80% of the simulation period is classified as 'AMC I' condition, which caused lower CN values and lower direct runoff estimation. Thus, the coefficients of the equation to adjust CN II to CN I and CN III depending on AMC condition were modified to minimize adjustments impacts on runoff estimation. The $R^2$ and the Nash-Sutcliffe coefficient values increase, 0.80 and 0.80 respectively. The difference in the estimated and filtered direct runoff decreased from 42.44% to 7.99%. The results obtained in this study indicate the AMC needs to be considered for accurate direct runoff estimation using the L-THIA model. Also, more researches are needed for realistic adjustment of the AMC in the L-THIA model.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.2
• /
• pp.272-280
• /
• 1996

This study was to evaluate the associations between urinary S-Phenyl-mercapturic acid(S-PMA) as a new indicator of biological monitoring for low level of exposure to benzene and independent variables such as the air concentration of benzene in the breathing zone of workers, the years of work, and smoking. In this study the subjects were the total of 145 drawn from 53 workers who were occupationally exposed to benzene and 92 workers who were not. The results were as follows: 1. In the workplace geometric mean concentration of benzene in the breathing zone of workers was 0.31 ppm(0.02 - 3.26 ppm) for the spraying workers and 0.25 ppm(0.02 - 3.95 ppm) for the printing workers. 2. The geometric mean of uninary S-PMA for non exposed group was $8.9{\mu}g/g$ creatinine($0.6-72.3{\mu}g/g$ creatinine), 80.3% (74 workers) of the total non-exposed workers indicated less than $20{\mu}g/g$ creatinine of uninary S-PMA. The difference of uninary S-PMA by sex, age, smoking was not significant. 3. The geometric mean of urinary S-PMA for workers who were exposed to benzene was $37.2{\mu}g/g$ creatinine, and was four times higher than that of workers who were not exposed. And 79.3% (42 workers) of the total exposed workers indicated more than $20{\mu}g/g$ creatinine of urinary S-PMA. 4. Regarding the level of benzene in the air, urinary S-PMA was the highest level of $147.9{\mu}g/g$ creatinine in the workers who were exposed to air concentration of 0.5 ppm of benzene and was higher as the level in the air was increased. 5. The correlation coefficient between log urinary S-PMA and log benzene concentration in the breathing zone was 0.80, and the following linear equation was found between urinary log S-PMA and log benzene concentration in the breathing zone : log S-PMA(${\mu}g/g$ creatinine) = 0.564 log benzene in air(ppm) + 0.192 (n=53, r=0.80, p=0.000) In conclusion, the concentration of S-PMA in urine proved to be good parameter for biological monitoring benzene exposure at the workplace even at low level of benzene in air.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.27 no.4
• /
• pp.238-246
• /
• 1991

In order to make clear the mechanism forming the fishing ground of anchovy drag net in connection with water temperature, catch and oceanographic data for the years of 1970-1988 in the Southern Sea of Korea were analyzed. The annual catch of anchovy drag net was about 21,000M/T in 1970 but it was increasing largely so far 100,000M/T in recent years. The fishing season of anchovy drag net is the whole year beside the prohibition season established in aims to protect the spawning group of anchovy, and then in the best season of the period from July to December, the fishing ground is made up in the coastal area joining Yosu, Namhaedo and Bangeojin. There were some evidences that the fishing condition was controlled by the oceanographic condition, especially water temperature, that is, when there was large difference in water temperature between the south area of the Eastern Sea and the west area of the southern Sea and the thermocline is formed strongly in the larger less than 20m, the fishing condition was good. On the other hand, there was a very effective correlation between the catch(X) of anchovy spawning group in Spring by other fishing gears, mainly drift net and that(Y) of the little size of anchovy by drag net in Autumn, expressed by the relative equation, Y=62,246+1.3X, r=0.63.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.67-79
• /
• 2016

Purpose - Over recent years, we have concerned about safety and quality on food products because of delivery complexity. The dependence of foreign food products escalate supply of products. And there are often negligent accident of marine and agricultural products. Therefore, the complexity increases the importance of safety on food and information quality for consumers. In spite of the interest augmentation of various interested parties, there is decrease in reliability and effectiveness, if it would be established without the right directivity. For the study, we tried to examine the first considerations the point of - view in service environment and information quality with accepting and diffusing the Traceability System. Then, we tried to verify the relationships between the factors of TS and the determinants of behavior decision. Next, we made efforts to find the mutual relationship among distributors, producers, consumers and the other prerequisite factors from the point of view in service environment and information quality in order to operate effectively the information perspective and system. Research design, data, and methodology - For the purpose of this study, the samples of consumers were targeted to Traceability System, and 661 people have been investigated. Through theoretical discussion of previous research, nine hypotheses were established, the influence of Continuous User Intention in TS. In order to test the hypotheses, a survey had conducted for 661 consumers as opinion leaders in their 20s-60s as data, and structural equation modeling was used. The difference analysis between Agricultural and Marine Products in TS; SPSS 22.0 and AMOS 22.0 were used for statistical analysis. Results - The major findings from this study were as follow; all factors of information quality excluding completeness and a social-impact had effects on the ease of use; all factors excluding understand ability in information quality and a social-impact had effects on the usefulness; completeness and social-impact had effects on perceived value; the ease of use had effects on usefulness and perceived value; usefulness had effects on perceived value and the intention of continuous use. From the results of different analysis, the CPLT(Completeness) factor has positive effects on Easy of USE and PV(Perceived Value) strongly in agricultural products. On the other hand, Social Duty has positive effects on Easy of Use strongly in marine products. Conclusion - In the age of information overflowing, TS will be a burden for users if it places too much emphasis upon accessibility. To accept and diffuse TS safely, therefore, Information System should be settled first into initial market formation. In addition, if TS elements are considered in conjunction with information factors and user environment, the acceptance and diffusion of TS would make synergy effect, even better. That is, this study contributes to the acceptance and diffusion of Traceability System. Accordingly, information quality will be settled into initial market formation. Also, social-impact element will be considered in conjunction with information quality's factors, and it will make synergy effect.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.12
• /
• pp.35-44
• /
• 2013

In this study, a particle method without using grid was applied for analysing large deformation problems in soil flows instead of using ordinary finite element or finite difference methods. In the particle method, a continuum equation was discretized by various particle interaction models corresponding to differential operators such as gradient, divergence, and Laplacian. Soil behavior changes from solid to liquid state with increasing water content or external load. The Mohr-Coulomb failure criterion was incorporated into the particle method to analyze such three-dimensional soil behavior. The yielding and hardening behavior of soil before failure was analyzed by treating soil as a viscous liquid. First of all, a sand column test without confining pressure and strength was carried out and then a self-standing clay column test with cohesion was carried out. Large deformation from such column tests due to soil yielding or failure was used for verifying the developed particle method. The developed particle method was able to simulate the three-dimensional plastic deformation of soils due to yielding before failure and calculate the variation of normal and shear stresses both in sand and clay columns.