• 한국농공학회논문집
• /
• 제50권2호
• /
• pp.37-44
• /
• 2008

A theoretical equation was proposed to consider the effect of ponding for the excess pore water pressure in agricultural reservoir on soft clay ground. The value of excess pore water pressure predicted using the proposed equation was compared to those predicted with the Terzaghi's method and the finite difference method(FDM), respectively, for the purpose of verification. The degree of consolidation according to ponding predicted by applying the proposed equation was close to the observed degree of consolidation on the double drainage condition(at DP-3) but it was less than the observed degree of consolidation on the single drainage condition(at DP-5). The equation was very applicable to practice because the analysis result by the equation was close to the observed data.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.76-83
• /
• 1995

Estimation of blasting behavior of explosives is prerequisite in the numerical analysis of blasting works. In this study, blasting pressure is estimated by the finite difference method using the Flux-Corrected Transport Algorithm. To formulate the behavior of blasting gas, the mass conservation equation, the moment conservation equation, the energy conservation equation and the ideal gas state equation are used. The simplified species conservation equation is included to simulate the behavior of reacting explosives. To verify the calculation, the Sod's shock tube problem, the strong shock problem and the reacting problem we used. Numerical results show that the shock wave can be captured by means of the FCT algorithm in the reacting and nonreacting states.

• 물과 미래
• /
• 제23권1호
• /
• pp.119-127
• /
• 1990

점착성 부유사 농도분포는 해수유동과 물질 확산에 의해서 결정되며 지배방정식으로는 2차원 수심적분된 Reynolds운동방정식, 연속방정식과 Fick의 확산법칙에 근거를 둔 대류-확산방정식이 사용되었다. 해수유동과 점성퇴적물 확산인 두개의 모형은 유한차분법을 이용하였고 유동모형은 양해법, 확산모형은 다증법을 사용하여 부유사 이동의 현상을 파악하였다. 해수유동방정식의 적용시 이송항의 포함여부에 대해서 조사하였으며 물질확산 방정식에 대해서는 한계전단응력값의 변화가 부유사농도에 영향을 주는가에 대해서 비교하였다.

• 한국유체기계학회 논문집
• /
• 제11권3호
• /
• pp.7-13
• /
• 2008

The cavitating flow simulation is of practical importance for many engineering systems, such as pump, turbine, nozzle, Infector, etc. In the present work, a solver for two-phase flows has been developed and applied to simulate the cavitating flows past hydrofoils. The governing equation is the two-phase Navier-Stokes equation, comprised of the continuity equation of liquid and vapor phase. The momentum and energy equation is in the mixture phase. The solver employs an implicit, dual time, preconditioned algorithm using finite difference scheme in curvilinear coordinates. An experimental data and other numerical data were compared with the present results to validate the present solver. It is concluded that the present numerical code has successfully accounted for two-phase Navier-Stokes model of cavitation flow.

• 한국컴퓨터정보학회논문지
• /
• 제20권12호
• /
• pp.67-74
• /
• 2015

The heat conduction equation, a type of a Poisson equation which can be applied in various areas of engineering is calculating its value with the iteration method in general. The equation which had difference discretization of the heat conduction equation is the simultaneous equation, and each line has the characteristic of expressing in sparse matrix of the equivalent number of none-zero elements with neighboring grids. In this paper, we propose a data structure for sparse matrix that can calculate the value faster with less memory use calculate the heat conduction equation. To verify whether the proposed data structure efficiently calculates the value compared to the other sparse matrix representations, we apply the representative iteration method, CG (Conjugate Gradient), and presents experiment results of time consumed to get values, calculation time of each step and relevant time consumption ratio, and memory usage amount. The results of this experiment could be used to estimate main elements of calculating the value of the general heat conduction equation, such as time consumed, the memory usage amount.

• 가정과삶의질연구
• /
• 제20권1호
• /
• pp.45-56
• /
• 2002

The main purposes of this article are to introduce the theoretical backgrounds and empirical application methods of two different Models for the function of expenditure, and to compare the goodness-o(-fit of the two models: a single-equation model and a complete-system-of-demand-equation model. For the empirical analysis of the single-equation model, a linear formula and a double-leg formula were employed. In order to test the complete-system-of-demand-equation model empirically, the \"Linear Approximation/Almost Ideal Demand System (LA/AIDS)" was used. The independent variables were the total living expense and expenditure categories Price index. The data used in this study were obtained from the quarterly statistics of "The Annual Report on the Urban Family Income and Expenditure Survey (Dosigagyeyonbo)" and "The Annual Report on the Consumer Price Index (Sobijamulgajaryo)," for the years 1994 to 1997. The goodness-of-fit (R-square) was higher with the complete-system-of-demand-equation model than with the single-equation model for the budget share on food (excluding eating-out expenses) and for the share on cultural and recreational activities. However, there was no difference between the two models in terms of the proportion of the expenditure on automobile fuel.fuel.

• 지구물리와물리탐사
• /
• 제19권3호
• /
• pp.136-144
• /
• 2016

탄성파 자료의 역산은 파동방정식에 기초하고 있으므로 파동방정식의 해를 정확하게 구하는 것이 가장 중요하다. 특히, 전파형역산은 파동장 전체를 이용하기 때문에 정문제에 해당하는 모델링이 정확하게 이루어져야 신뢰할 수 있는 결과를 얻게 된다. 파동방정식의 수치해를 구하는 대표적인 기법인 유한차분법과 유한요소법은 해의 수렴성을 보장할 수 있어야 하는데, 해의 수렴성은 이론적으로 일반화된 증명이 되어 있으나 실제 문제에 적용할 경우 일관성과 안정성을 분석해야 한다. 모델링 결과의 일관성은 송신원 함수의 구현이 매우 중요한 부분인데, 유한차분법은 디랙 델타 함수(Dirac delta function)를 나타낼 때 격자 간격으로 표준화된 싱크 함수(sinc function)를 사용해야 하는 반면 유한요소법은 격자 간격에 관계없이 기저함수 값을 사용하면 된다. 주파수 영역 파동방정식을 사용할 경우 송신 파형 함수의 스펙트럼을 정확하게 표현하기 위해 샘플링 이론으로 정의되는 시간 간격보다 더 조밀한 샘플링 간격을 사용하고 나이퀴스트(Nyquist) 주파수보다 더 높은 주파수를 최대 주파수로 사용해야 한다. 또한, 복소 각주파수를 사용하는 경우 감쇠 파동방정식을 만족하기 위해서는 송신 파형 함수를 먼저 감쇠한 후 사용해야 한다. 이러한 요건들이 모두 만족되었을 때 신뢰할 수 있는 역산 알고리즘 개발이 가능하다.

• 대한수학회논문집
• /
• 제4권1호
• /
• pp.121-128
• /
• 1989

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 1988년도 제30회 수공학연구발표회논문초록집
• /
• pp.58-65
• /
• 1988

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.104-108
• /
• 2017

Induction motors have wide applicability in many fields, both in industrial sectors and households, for their advantages of a high efficiency and robust structure. The introduction of power-source-containing harmonics into the induction motor winding lowers its efficiency and increases its temperature, greatly affecting its operation characteristics. In this study, we performed an electromagnetic field analysis using the time-difference finite-element method with the purpose of analyzing the steady-state current characteristics of an induction motor. Additionally, we calculated the steady-state current with a method combining an electromagnetic field equation and a circuit equation. In the electromagnetic field analysis, the nonlinearity was taken into account using the Newton-Raphson method, and a backward time-difference method was employed for the time derivative term. Then, we compared the steady-state current of the induction motor obtained by calculation with the experimentally measured values, thus validating the proposed algorithm. Furthermore, we analyzed the impacts of the shape and material of the rotor conductor bar of the induction motor on the steady-state current of the main winding.