• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.865-868
• /
• 1993

This paper describes a simple random signal generator employing by CMOS analog technology in current mode. The system is a nonlinear dynamical system described by a difference equation, such as x(t＋1) = f(x(t)) , t = 0,1,2, ... , where f($.$) is a nonlinear function of x(f). The tent map is used as a nonlinear function to produce the random signals with the uniform distribution. The prototype is implemented by using transistor array devices fabricated in a mass product line. It can be easily realized on a chip. Uniform randomness of the signal is examined by the serial correlation test and the $\chi$2 test.

• 한국전자파학회논문지
• /
• 제11권8호
• /
• pp.1444-1454
• /
• 2000

The implementation of IF group delay equalizer and its performance are presented for radio relay system applications, and measured results are in good agreement with the simulated ones based upon analytical formulations. For waveguide filter of 40㎒ channel spacing, equalized delay accuracy of about +/- 2.0nsec can be obtained only by constructing 4 stage delay circuits, which provides good performance in system BER curves compared with no filter case, and the difference is less than 1.0㏈ at $10^{-12}$ BER. So this scheme with simple hardware design can be used for correcting the distorted group delays mainly caused by wavegiude filters. To evaluate the designed group delay equalizer, various simulated and experimental results are shown here in conjunction with STM-1 signal of co-channel 64-QAM digital radio relay system.

• Transactions on Electrical and Electronic Materials
• /
• 제17권1호
• /
• pp.21-24
• /
• 2016

A junction box used in a 3 kW photovoltaic power generation system plays a role in collecting and supplying the direct current voltage produced by photovoltaic modules to an inverter. It is also used for facilitating maintenance checks and protecting the module and inverter by keeping the voltage constant. As for the junction box, using it in a parallel connection creates a difference between the setup modules. In order to compensate, an inverse voltage diode is used. But the high-power created through the solar generator can be delivered to the inverter through the inverter regularly. Therefore, a component can break down due to excess heat. And consequently short circuits and electric leakage occurs. In this study, using a junction box that enabled the bypass of high electric power, it was possible to reduce heat generation by approximately 35℃ when compared to a standard junction box.

• 센서학회지
• /
• 제20권4호
• /
• pp.254-259
• /
• 2011

In this paper, a current stimulator circuit with adaptive supply regulator for retinal prosthesis is proposed. In current stimulation systems, the stimulating circuits with wide voltage swing range are needed due to the high impedance of the retina cell and microelectrodes. Thus, previous researches adopt the high voltage architecture to obtain the enough operating range. The high voltage architecture, however, could increase the power consumption and can damage the retina cells. The proposed circuit provides the adaptively regulated supply voltage by measuring the difference between desired stimulation current and the actual stimulation current. The proposed circuit can achieve the extended range of the allowable cell impedance, improved accuracy of the stimulation current, and higher biosafety.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 SMICS 2004 International Symposium on Maritime and Communication Sciences
• /
• pp.28-31
• /
• 2004

A Quadrature phase detector for high-speed delay-locked loop is introduced. The proposed Quadrature phase detector is composed of two nor gates and it determines if the phase difference of two input clocks is 90 degrees or not. The delay locked loop circuit including the Quadrature phase detector is fabricated in a 0.18 urn standard CMOS process and it operates at 5 ㎓ frequency. The phase error of the delay-locked loop is maximum 2 degrees and the circuits are robust with voltage, temperature variations.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.432-442
• /
• 2012

In this paper, we propose, analyze and simulate the performances of some new plasmonic logic gates in two dimensional plasmonic waveguides with nanodisk resonators, using the numerical method of finite difference time domain (FDTD). These gates, including XOR, XNOR, NAND, and NOT, can provide the highly integrated optical logic circuits. Also, by cascading and combining these basic logic gates, any logic operation can be realized. These devices can be utilized significantly in optical processing and telecommunication devices.

• 대한전자공학회논문지SD
• /
• 제44권6호
• /
• pp.19-27
• /
• 2007

본 논문에서는 공급전압 변화에 둔감한 Gbps급 저전력 LVDS I/O회로를 설계하였다. 제안된 LVDS I/O는 1.8 V, $0.18\;{\mu}m$ TSMC 공정을 이용하여 설계, 시뮬레이션 및 검증하였다. 설계된 LVDS I/O회로는 송신단과 수신단을 포함한다. 제안하는 송신단은 phase splitter와 SC-CMFB를 이용한 출력버퍼로 구성된다. phase splitter의 출력은 공급 전압이 변화하여도 $50{\pm}2%$의 duty cycle을 가지며 $180{\pm}0.2^{\circ}$의 위상차를 가진다. 출력 버퍼는 SC-CMFB를 이용하여 허용 가능한 $V_{CM}$ 전압 값인 $1.2{\pm}0.1V$을 유지하도록 설계하였다. $V_{OD}$전압 또한 허용범위에서 최소값인 250 mV를 갖도록 설계하여 저전력 동작이 가능하도록 구성하였다 수신단은 38 mV의 히스테리시스 전압값을 가지면서 DC옵셋 전압값이 $0.2{\pm}2.6 V$로 넓은 공통 모드전압 범위가 가능하도록 설계하였고 공급전압 변화에도 rail-to-rail로 복원할 수 있는 기능을 가지고 있다. 또한, 수신단은 1 GHz에서 38.9 dB의 높은 전압 이득을 갖도록 설계하였다.

• 한국시뮬레이션학회논문지
• /
• 제22권4호
• /
• pp.93-98
• /
• 2013

본 논문에서는, 초고집적과 초고내압 MOSFET를 위한 높은 임계전압에서 제안한 구조의 얕은 트랜치 접합 격리 구조에 대한 시뮬레이션 하였다. 열전자 스트레스와 열 손상의 유전 강화 전계의 물리적 기본 모델들은 주위 온도와 스트레스 바이어스의 넓은 범위에 걸친 집적화된 소자들에 있어서 분석하는 전기적의 목표인 TCAD 툴을 이용하였다. 시뮬레이션 결과, 얕은 트랜치 접합 격리 구조가 수동적인 전기적 기능 일지라도, 소자의 크기가 감소됨에 따라서, 초대규모 집적회로 공정의 응용에서 제안된 얕은 트랜치 격리 구조가 전기적 특성에서 전위차, 전계와 포화 임계 전압이 높게 나타났다.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.97-102
• /
• 2017

A current transformer (CT) is a type of sensor that consists of a combination of electric and magnetic circuits, and it measures large ac currents. When a large amount of current flows into the primary winding, the alternating magnetic flux in the iron core induces an electromotive force in the secondary winding. The characteristics of a CT are determined by the iron core design because the iron core is saturated above a certain magnetic flux density. In particular, when a large current, such as a current surge, is input into a CT, the iron core becomes saturated and the induced electromotive force in the secondary winding fluctuates severely. Under these conditions, the CT no longer functions as a sensor. In this study, the characteristics of the secondary winding were investigated using the time-difference finite element method when a current surge was provided as an input. The CT was modeled as a two-dimensional analysis object using constraints, and the saturation characteristics of the iron core were evaluated using the Newton-Rhapson method. The results of the calculation were compared with the experimental data. The results of this study will prove useful in the designs of the iron core and the windings of CTs.

• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.9-14
• /
• 2015

Due to the declining LED price and environment-friendly energy policies, CO2 emission reduction and energy-saving, the LED lighting industry is accelerating rapidly. In particular, the needs for LED lamp, replacing the existing fluorescent lamp without exchange luminaire or driver circuits, are also rapidly increasing. Therefore, replacement for T8 fluorescent lamp, LED T8 lamp was developed and standardized. However, except LED T8 lamps, other lamps' regulations or standards were not enacted. Also, the stability of fluorescent lamp substitutable LED lamp is low due to the difference in electrical characteristics and mismatch between the existing fluorescent lamp ballast and LED lamp. Therefore, many are struggling while developing fluorescent lamp substitutable LED lamp. In this paper describes the properties of existing fluorescent lamp ballasts and the considerations while developing fluorescent lamp substitutable LED lamp : demonstrating its validity by experiments the developed fluorescent lamp substitutable LED lamp prototype.