• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.2
• /
• pp.1-5
• /
• 2003

In this project, the efficiency of localized heating for micro systems packaging is developed by using a forced potential scheme microheater. Less than 0.2 Mpa contact pressure was used for bonding with a 200 mA current input for $50{\mu}m$ width, $2{\mu}m$ height and $8mm{\times}8mm$, $5mm{\times}5mm$, $3mm{\times}3mm$ sized phosphorus-doped poly-silicon microheater. The temperature can be raised at the bonding region to $800^{\circ}C$, and it was enough to achieve a strong and reliable bonding in 3 minutes. The IR camera test results show improved uniformity in heat distribution compared with conventional microheaters. For performing the gross leak check, IPA (Isopropanol Alcohol) was used. Since IPA has better wetability than water, it can easily penetrate small openings, and is more suitable for conducting a gross leak check. The pass ratio of bonded dies was 67%, for conventional localized heating, and 85% for our newly developed FP scheme. The bonding strength was more than 25Mpa for FP scheme packaging, which shows that FP scheme can be a good candidate for micro-scale hermetic packaging.

• Koreanishche Zeitschrift fur Deutsche Sprachwissenschaft
• /
• v.10
• /
• pp.1-24
• /
• 2004

Wir leben heute in der sosenannten Wissensgesellschaft. Diese Geseilschaft kann durch den Zugang zu immensen Wissens- und Informationsbestanden sowie durch einen fruher nicht denkbaren Grad an $Akualit\"{a}t$ dieser Informationen gekennzeichnet werden Deutsche Unternehmen haben bereits erkannt, dass das Wissen ihrer Mitarbeiter den Wert eines Unternehmens $ma{\ss}geblich$ bestimmt. Deshalb fordern sie von ihren Mitarbeitern, sich immer speziellere, immer neuere Wissensinhaite bzw. Informationen immer schneller anzueignen. Dies gilt auch $f\"{u}r$ Fremdsprachen, deren Kenntnis im Prozess der weit vorangeschrittenen Internationalisierung und Globalisierung als ein wesentliches Instrument vorausgesetzt wird. Der Hangel an fremdsprachlichen $F\"{a}higkeiten$ in Betrieben wirkt sick vol allem auf ihre Kompetenz im Umgang mil einer steigenden Anzahl von $Gesch\"{a}ftskontakten$ und ihre $ausl\"{a}ndischen$ $M\"{a}rkte$ aus. D. h. er bedeutet in einer durch zunehmenden Wettbewerb bestimmten Weit Marktverluste. Unternehmen sollen Herausforderungen $bew\"{a}ltigen$, die $gro{\ss}e$ interaktive und kommunikative $F\"{a}higkeit$ erfordern, $Ver\"{a}nderungen$ zu begreifen, sich ihnen zu stollen und sie zu $\"{u}berwinden$, um erfolgreich einen $gr\"{o}{\ss}eren$ Wirkungskreis auf den $Weltm\"{a}rkten$ zv erreichen. Deutsche Unternehmen erkennen inzwischen die besondere Bedeutung von $Fremdsprachenf\"{a}higkeiten$ ihrer Mitarbeiter $f\"{u}r$ Erfdlgssicherung und -ausbau. Diese Erkenntnisse ergeben sich auch aufgrund von Unternehmensbefragungen (z.B. vom Institut der deutschen Wirtschafi, $K\"{o}ln$). In fast allen Unternehmen ist Englisch die Fremdsprache Nummer Eins. Sie brauchen allerdings mehr als eine Fremdsprache. In der Regel werden zwei bis drei Fremdsprachen pro Betrieb $ben\"{o}tigt$. Wie $gro{\ss}$ der Fremdsprachenbedarf ist, $h\"{a}ngt$ von verschiedenen Faktoren ab: 1) Je $gr\"{o}{\ss}er$ ein Betrieb ist, desto wichtiger werden die fremdsprachlichen $F\"{a}higkeiten$ seiner Mitarbeiter. 2) In Firmen mit Auslandsverbindung und Unternehmen, die Teil eines $ausl\"{a}ndischen $Betriebes sind bzw $ausl\"{a}indische$ Niederlassungen haben, ist der Fremdsprachenbedarf von $gro{\ss}er$ Bedeutung. 3) Nach Branchen ist der Fremdsprachenbedarf differenziert. Fremdsprachenkenntnisse sind im exportorientierten produzierenden Gewerbe unverzichtbar. 4) In den verschiedenen Unternehmensbereichen werden Fremdsprachenkenntnisse differenziert $ben\"{o}tigt$. Funktionsbereiche wie Verkauf und Kundenbetreuung haben den $st\"{a}rksten$ Fremdsprachenbedarf, Kommunikation ist eine wesentliche Voraussetzung $f\"{u}r$ erfolgreiche Verhandlungen. Je $gr\"{o}{\ss}er$ die sprachliche $F\"{a}higkeiten$ und das Geschick der Mitarbeiter sind, umso besser laufen die $Gesch\"{a}ftsverhandlungen$. Damit wird klar, weshalb sich viele deutsche Unternehmen beim Fremdsprachenlernen, bzw. bei der Fort- und Weiterbildung von Fremdsprachenkenntnissen ihrer Mitarbeiter spendabel zeigen.

• Koreanishche Zeitschrift fur Deutsche Sprachwissenschaft
• /
• v.10
• /
• pp.201-229
• /
• 2004

In der vorliegenden Albeit wird die funktionale $Dom\"{a}ne$ der Konkomitanz unter funktional-typologischen Gesichtpunkten untersucht. Dabei wird ein funktionales Rahmenwerk fur die Untersuchungen $\"{u}ber$ die verschiedenen komitativen und intrumentalen Relationen entwickelt. Es gibt eine Reihe von Partizipantenrelationen in der funktionalen $Dom\"{a}ne$ der Konkomitanz, $\n\"{a}mlich$ 'Partner', 'Companion', 'Vehicle', 'Tool', 'Material' und 'Manner'. Diese Partizipanten $k\"{o}nnen$ als Konkomitant bezichnet werden. Sie bilden ein Kontinuum $bez\"{u}glich$ der Empathiehierarchie sowie der Kontrollhierarchie. Konkomitanten $k\"{o}nnen$ bei ihrer syntaktischen Kodierung $gem\"{\a}{\ss}$ den spezifischen Typen der konkomitanten Relationen und ihren absoluten Eigenschaften variieren. Es werden sieben verschiedene Typen der Kodierungsstrategien vorgestellt, d.h. konkomitante $Pr\'{a}dikation$, adpositionale Markierung, Kasusmarkierung, Verbderivation, inkorporation, Konversion und lexikale Fusion. In einer gegebenen Sprache kann es $nat\"{u}rlich$ feinere Variation, die z.B. mit den Graden der Grammatikalisierung und Lexikakisierung dieser Kodierungsstrategien zu tun hat, geben. Die Distribution der strukturellen Apparaturen auf der funktionalen $Dom\"{a}ne$ der Konkomitanz ist innerhalb einer Sprache nicht einheitlich. Dies gilt auch $f\"{u}r$ den Sprachen (z.B. Deutsch und Englisch), die gewohnlich als ein typisches Beispiel fur den Synkretismus zwischen Komitativ und Instrumental angesehen werden. Die $Pr\"{a}position$ mit im Deutschen $dr\"{u}ckt$ nur eine Teilmenge der verschiedenen konkomitanten Relationen aus. Tlansportrnittei' und Material' werden also nicht durch die $Pr\"{a}position$ mit $ausgedr\"{u}ckt$. Beim Ausdruck der konkomitanten Relationen verwendet Deutsch konsistent die Strategie der adpositionalen Markierung. Andere $m\"{o}gliche$ Strategien $k\"{o}nnen$ als ein minimaler Sonderfall angesehen werden. Koreanisch $verf\"{u}gt$ hingegen auf zwei Ausdrucksstrategien, $n\"{a}mlich$ konkomitante $Pr\"{a}dikation$ und Kasusmarkieriing. Die Auswahl zwischen den beiden Strategien ist meistens von den Empathieeigenschaften der Konkomitanten $abh\"{a}ngig$. Auch innerhalb einer Ausdrucksstrategie spielt die Empathie der Konkomitanten eine wichtige Rolle bei der Auswahl der Strukturmittel. Einen Synkretismus weisen im Koreanischen 'Partner' & 'Companion' einerseits und 'Vehicle' & 'Tool' & 'Material' andererseits auf, Die Ersteren werden durch die auditive Kasusmarkierung und die Letzteren durch die instrumentale Kasusmarkierung ausgedruckt. Ein Synkretimus beim Ausdruck der verschiedenen konkomitanten Relationen ist in den Sprachen, die nur konkomitante $Pr\"{a}dikation$ aufweisen, nicht zu erwarten, denn ein konkomitantes $Pr\"{a}dikat$ gibt die Art der Beteiligung der Konkomitanten an der Situation lexikalisch mehr oder weniger explizit wieder

• Journal of Families and Better Life
• /
• v.28 no.1
• /
• pp.131-143
• /
• 2010

The purpose of this study is to understand the living culture of transnational married women and to analyze the out door play of children in their hometown. The data was collected through observation from 27th June to 7th July 2008 in Jian, Jilin Province China. The children's play and lifestyles were observed, and data pertaining to the culture of the people were collected by a teacher and staff. We also visited the residents for housing information. The results are given below. 1. They dressed in Korean clothes on festive days and the boys put on a hood. They had eating habits which included cooking for themselves or buying semi-manufactured goods but did not use, instant food. The housing habits involved a combination of cooking and heating by Korean floor heating system(Ondol). They utilized outdoor space to grow vegetables. Those with a fulltime job(teacher) preferred to live in an apartment but an apartment was too expensive. Public utility charges and traffic expenses were cheap. 2. The main festive days are the lunar New Year's Day and Chuseok. The children returned home and enjoyed the festive day with their parents. The language used are Korean language and Chinese. Some Korean words and phrases in Jian Joseonjok have different meanings as compared to how they are used in Korea. A capping ceremony did not to celebrate becoming an adult from an adolescent. Couples performed a wedding ceremony at a wedding hall attended by their parents and invited relatives from both families. The relatives gave the couple a wedding gift. They did not go on a wedding trip as it was not affordable but instead spent their wedding night at a hotel in this culture. When someone dies, they bury the body after cremation. They perform a memorial service for three years on the birthday of the departed. They have a banquet on the 60th birthdays with their relatives and neighbours and are typically presented with a carp for longevity. 3. They understand capitalism and therefore send their children to school to improve their social position. The Korean and Chinese languages are required subjects in school. The students choose a second language(English or Russian). They prefer English class but at the time of this study an English class was not offered at the school in Jian Joseonjok. Therefore the children entered a Chinese school. 4. The children play outdoor games such as Y$\acute{a}$o J$\grave{i}\bar{a}$(要家), X$\grave{i}$ang g$\grave{i}$(象棋), T$\grave{i}\grave{a}$o p$\acute{i}$ j$\grave{i}$n(r)(跳皮節), D$\grave{o}$uch ing g$\grave{u}$n 凍冷根, B$\bar{e}$i B$\bar{e}$i 背背, and soccer. They play games according to the season.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.2
• /
• pp.94-100
• /
• 2010

Purpose: The purpose of this study was to compare the fracture strength of the zirconia ceramic crowns according to tooth position. Material and methods: After 10 metal dies were made for each group, the zirconia ceramic crowns were fabricated using CAD/CAM system ($Lava^{TM}$ All-Ceramic System) and each crown was cemented on each metal die with resin cement (Rely $X^{TM}$ Unicem). The cemented zirconia ceramic crowns mounted on the testing jig were inclined with 30 degrees to the long axis of the tooth and the universal testing machine was used to measure the fracture strength. Results: 1. The fracture strength of the zirconia ceramic crown in the lower 1st molar (2963 N) had the highest and that in the lower central incisor (1035 N) had the lowest. 2. The fracture strength of zirconia ceramic crown was higher than that of the IPS Empress crowns in all tooth position. 3. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the long axis of the crowns. 4. There were no significant differences on the fracture strength of the zirconia ceramic crowns according to tooth position except in premolar group. Conclusion: Within the limitations of this study, the results suggested that strength of zirconia ceramic crown is satisfactory for clinical use.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.271-277
• /
• 2015

PURPOSE. This study was to evaluate the marginal fit of two CAD-CAM anatomic contour zirconia crown systems compared to lithium disilicate glass-ceramic crowns. MATERIALS AND METHODS. Shoulder and deep chamfer margin were formed on each acrylic resin tooth model of a maxillary first premolar. Two CAD-CAM systems (Prettau$^{(R)}$Zirconia and ZENOSTAR$^{(R)}$ZR translucent) and lithium disilicate glass ceramic (IPS e.max$^{(R)}$press) crowns were made (n=16). Each crown was bonded to stone dies with resin cement (Rely X Unicem). Marginal gap and absolute marginal discrepancy of crowns were measured using a light microscope equipped with a digital camera (Leica DFC295) magnified by a factor of 100. Two-way analysis of variance (ANOVA) and post-hoc Tukey's HSD test were conducted to analyze the significance of crown marginal fit regarding the finish line configuration and the fabrication system. RESULTS. The mean marginal gap of lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) was significantly lower than that of the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) (P<.05). Both fabrication systems and finish line configurations significantly influenced the absolute marginal discrepancy (P<.05). CONCLUSION. The lithium disilicate glass ceramic crown (IPS e.max$^{(R)}$press) had significantly smaller marginal gap than the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia). In terms of absolute marginal discrepancy, the CAD-CAM anatomic contour zirconia crown system (ZENOSTAR$^{(R)}$ZR translucent) had under-extended margin, whereas the CAD-CAM anatomic contour zirconia crown system (Prettau$^{(R)}$Zirconia) and lithium disilicate glass ceramic crowns (IPS e.max$^{(R)}$press) had overextended margins.

• Herbal Formula Science
• /
• v.11 no.1
• /
• pp.57-90
• /
• 2003

The result of Bibliographic studies on the pathological mechanism of the sudden coma, we got the conclusion like this. 1. The sudden coma is an acute syndrome that refers to be a sudden fainting, an unconsciousness, an aphasia or a cold clammy limb, and immediately awakes or dies, and awakes in a short time, and if we awake, it doesn't leave over and above a sequela. 2. The clinical presentation of the sudden coma can be summarized as follows : The 1st is a disease raising the sudden death due to unconsciousness accompanied by wry mouth & sudden syncope with coma. The 2nd is simply the state of cold limbs. The 3rd is the meaning of the physique and symptomes of the six meridians. The last is the ancient method of expression in contrast of the beriberi. 3. The pathological mechanism of the sudden coma consists of the toxoid from outside, Qi and Xie, fatigue, damp phegm, the damage from seven emotions and the damage from five mental elements, especially the mental disorder due to the angry energy, causes the problems when the fleming-up of liver fire and the depressed of liver qi raise the physiological disorder. 4. Therapeutic methods of sudden coma are soothing the liver and remove stasis, soothing depression and circulating of the qi, calming the liver and suppressing yang. When that is early stage, at first, we must checking upward adverse flow of the qi after promoting the circulation of qi and awakening, and then, we must regulate excessive deficiency of yin yang by therapy that is based on differentiated in symptoms according to heat & cold, deficiency & excess, and use invigorating herb medicine for supporting vigour.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.953-959
• /
• 1995

It was investigated that reinforced species, billet condition and extrusion variation in Al 6061 composite material effected on extrusion process of particulate reinforced composite material. The strength of composite material with reinforcement species revealed SiC$\sub$w/> A1$_2$O$\sub$3f/ > A1$_2$O$\sub$3f/ > A1$_2$O$\sub$3f/ orderly. K$\sub$w/ increased as volute fraction increased in all composite material. The composite materials reinforced by A1$_2$ $O_3$required the larger pressure in hot extrusion process than those by SiC$\sub$p/ at all condition. Extrusion process tended to decrease as the semi-angle of extrusion dies increased because larger contact area caused larger shear friction. Extrusion temperature went up about 50$^{\circ}C$ in low elevated deformation temperature. In extrusion temperature above 500$^{\circ}C$, severe tearing occurred on extrusion surface. More reinforcement in volume fraction, more hot tearing.

• Korean Journal of Materials Research
• /
• v.25 no.5
• /
• pp.226-232
• /
• 2015

High temperature plasma coating technology has been applied to recover damaged aluminum dies from wear by spraying pure aluminum and alumina powder. However, the coated mixed powder layer composed of aluminum and alumina often undergoes a detachment from the substrate, making the coated substrate die unable to maintain its expected life span. In this study, in order to increase the bonding strength between the substrate and the coating layer, a pure aluminum layer was applied as an intermediate bond layer. In order to prepare the specimen with variable bond coating conditions, the bond coat layers with a various gun speed from 10 cm/sec to 30 cm/sec were prepared with coating cycle variations ranging from three to nine cycles. The specimen with a bond coat layer coated with a gun speed of 20 cm/sec and three coating cycles exhibited ~13MPa of adhesion strength, while the specimen without a bond coat layer showed ~6 MPa of adhesion strength. The adhesion strength with a variation of bond coat layer thickness is discussed in terms of coating parameters.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.140-140
• /
• 2018

The 3D interconnect technologies have been appeared, as the density of Integrated Circuit (IC) devices increases. Through Silicon Via (TSV) process is an important technology in the 3D interconnect technologies. And the process is used to form a vertically electrical connection through silicon dies. This TSV process has some advantages that short length of interconnection, high interconnection density, low electrical resistance, and low power consumption. Because of these advantages, TSVs could improve the device performance higher. The fabrication process of TSV has several steps such as TSV etching, insulator deposition, seed layer deposition, metallization, planarization, and assembly. Among them, TSV metallization (i.e. TSV filling) was core process in the fabrication process of TSV because TSV metallization determines the performance and reliability of the TSV interconnect. TSVs were commonly filled with metals by using the simple electrochemical deposition method. However, since the aspect ratio of TSVs was become a higher, it was easy to occur voids and copper filling of TSVs became more difficult. Using some additives like an accelerator, suppressor and leveler for the void-free filling of TSVs, deposition rate of bottom could be fast whereas deposition of side walls could be inhibited. The suppressor was adsorbed surface of via easily because of its higher molecular weight than the accelerator. However, for high aspect ratio TSV fillers, the growth of the top of via can be accelerated because the suppressor is replaced by an accelerator. The substitution of the accelerator and the suppressor caused the side wall growth and defect generation. The suppressor was used as Single additive electrodeposition of TSV to overcome the constraints. At the electrochemical deposition of high aspect ratio of TSVs, the suppressor as single additive could effectively suppress the growth of the top surface and the void-free bottom-up filling became possible. Generally, copper was used to fill TSVs since its low resistivity could reduce the RC delay of the interconnection. However, because of the large Coefficients of Thermal Expansion (CTE) mismatch between silicon and copper, stress was induced to the silicon around the TSVs at the annealing process. The Keep Out Zone (KOZ), the stressed area in the silicon, could affect carrier mobility and could cause degradation of the device performance. Cobalt can be used as an alternative material because the CTE of cobalt was lower than that of copper. Therefore, using cobalt could reduce KOZ and improve device performance. In this study, high-aspect ratio TSVs were filled with cobalt using the electrochemical deposition. And the filling performance was enhanced by using the suppressor as single additive. Electrochemical analysis explains the effect of suppressor in the cobalt filling bath and the effect of filling behavior at condition such as current type was investigated.