• 한국항공우주학회지
• /
• 제41권10호
• /
• pp.820-826
• /
• 2013

본 논문에서는 스마트 스킨 기술을 활용한 소형경량 및 광대역 특성을 갖는 항공기용 안테나 내장 스킨 구조(CLAS: Conformal Load bearing Antenna Structure)를 설계하였다. 제안된 CLAS 안테나는 전기적 성능을 만족하기 위해 전도성 매쉬, 외부표피, 복사소자, 내부심재 및 하우징 등으로 구성하였다. 특히, 복사소자의 경우 복합자성유전체와 PCB에 에칭된 방사체로 구성되어 있으며 방사체는 복합자성유전체에 삽입되어 슬롯형 폴디드 대수주기 구조(Folded Log-Periodic)를 갖는다. 제안된 CLAS 안테나는 복합자성유전체에 의해 공진주파수가 낮아지고 임피던스 매칭특성이 향상되었으며 측정 결과, 안테나의 소형경량 및 광대역 특성을 확인하였다.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.1-6
• /
• 1996

A single phase Ba2(Ti8,472Zr0.528)O20 was prepared by the oxalate method from aqueous solution of BaCl2 TiCl4 and ZrOCl2. The structure ananlysis has been carried out by Rietveld analysis method at room temperature. Powder X-ray data of Ba2(Ti8,472Zr0.528)O20 was indexed with the triclinic lattice(a=7.4587 $\AA$ b=14.0672 $\AA$, c=13.3327 $\AA$, $\alpha$=89.87, $\beta$=79.45 ${\gamma}$=84.46) The R (Residual) values of structure refinement were in a range between 10.00 and 8.00 This analysis proved that the added Zr occupied Ti sites in th structure of Ba2Ti9O20. Ba2(Ti8,472Zr0.528)O20 has excellent dielectric properties(dielectric constant K=40.49 at 5.42 GHz Q=4621) so that it can be used as good microwave dielectric materials.

• 한국표면공학회지
• /
• 제54권4호
• /
• pp.178-183
• /
• 2021

The temperature and frequency dependence of the dielectric constant of the BaTiO₃ substituted with two types of donor dopants, Nb⁵⁺ and Ta⁵⁺, respectively, were compared and analyzed. Dielectric specimens of four specific compositions, Ba_0.95Nb_0.05TiO₃, Ba_0.90Nb_0.10TiO₃, Ba_0.95Ta_0.05TiO₃, and Ba_0.90Ta_0.010TiO₃ were prepared by calcining at 1100 ℃ and sintering at 1300 ℃ to have a perovskite structure to measure capacitance. XRD and SEM analysis were used to observe the structure, with particular focus on the integration into the Nb⁵⁺ and Ta⁵⁺ substituted BaTiO₃ crystal lattice. X-ray diffraction peaks in the (200) and (002) planes were observed between 45.10° and 45.45° of the BaTiO₃ solid solution substituted with different fractions of Nb⁵⁺ and Ta⁵⁺. The dielectric properties were analyzed and the relationship between the properties and structure of the substituted BaTiO₃ was established. The fine particles and high density of the substituted BaTiO₃ were maintained like pure BaTiO₃, and in particular, a shift toward the low temperature side of the phase transition temperature range was clearly found, unlike pure BaTiO₃. In addition, the phase transition at a temperature higher than the Curie temperature relatively satisfies the modified Curie-Weiss law.

• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.63-68
• /
• 2019

온도 및 압축응력 변화에 따른 PIN-PMN-PT계 압전 단결정의 유전 특성과 압전 특성을 조사하였다. 단결정의 결정상은 110℃ 영역에서 강유전 rhombohedral 구조에서 tetragonal 구조로, 190℃ 영역에서 tetragonal 구조로부터 상유전 cubic 구조로 변화하였다. 전계 인가에 따른 분극 및 변위의 변화율로부터 압전상수와 비유전율을 계산하였으며, 이는 계측기로부터 측정된 값과 유사한 수준을 나타내었다. 샘플에 인가되는 압축응력이 증가할수록 압전상수 d₃₃과 비유전율값은 증가하는 경향성을 나타내었다. 측정 온도 5℃에서 샘플에 인가되는 압축응력이 60 MPa인 경우 d₃₃ 값이 4500 pC/N로 계산되었으며, 측정 온도 60℃인 경우, 샘플에 인가되는 압축응력이 40 MPa 일 때 비유전율 62000이 계산되었다. 압축응력이 높아질 때 압전상수와 비유전율 값이 상승한 것은 rhombohedral 상에서 orthorhombic 상으로의 전이에 기인한 것으로 판단된다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권2호
• /
• pp.49-52
• /
• 2009

Barium strontium calcium titanate powders were prepared with the sol-gel method. Ferroelectric $(Ba_{0.54}Sr_{0.36}Ca_{0.1})TiO_3$(BSCT) thick films were fabricated by the screen-printing method on alumina substrate. Then we investigated the structural and dielectric properties of the BSCT thick films at different sintering temperatures. The thermal analysis showed that the BSCT polycrystalline perovskite phase formed at around $660^{\circ}C$. The X-ray diffraction analysis showed a cubic perovskite structure with no second phase present in all of the BSCT thick films. The average grain size and the thickness of the specimens sintered at $1450^{\circ}C$ were about $1.6{\mu}m$ and $45{\mu}m$, respectively. The relative dielectric constant increased and the dielectric loss decreased as the sintering temperature was increased; for BSCT thick films sintered at $1450^{\circ}C$ the values of the dielectric constant and the dielectric loss were 5641 and 0.4%, respectively, at 1 kHz.

• The Korean Journal of Ceramics
• /
• 제1권1호
• /
• pp.13-20
• /
• 1995

Effects of thermal annealing on the dielectric/piezoelectric properties of $Pb(Zn, Mg)_{1/3}Nb_{2/3}O_3-PbTiO_3$ ceramics (PZMNPT) with Zn/Mg=6/4) were examined across the rhombohedral/tetragonal morphotropic phase boundary (MPB). Both the relative dielectric permittivity ($\varepsilon$r)and the piezoelectric constant($d_33$)/electromechanical coupling constant ($k_p$)were increased by thermal annealing ($800^{\circ}$~$900^{\circ}C$) after sintering at $1150^{\circ}C$ for 1 hr. Based on the dielectric analysis using the series mixing model and the concept of a random distribution of the local Curie points, the observed improvements in the dielectric and piezoelectric properties of PZMN-PT were interpreted in terms of the elimination of PbO-rich amorphous intergranular layers(~1nm) induced by thermal annealing. A concrete evidence of the presence of amorphous grain-boundary layers in the unannealed (as-sintered) specimen was obtained by examining the structure of intergranular region using a TEM.

• 한국정보전자통신기술학회논문지
• /
• 제9권6호
• /
• pp.630-636
• /
• 2016

In this paper, a novel triple-mode cavity structure, designed for compactness and operating at 850 MHz, is analyzed. A cylindrical dielectric resonator is loaded into a metallic cylindrical cavity. Previous study has been focused on the analysis of the cylindrical dielectric resonator, but in this paper, the effect of the cylindrical metallic cavity has been analyzed. Enclosing the dielectric resonator inside the metallic cavity increases the resonant frequency of the dielectric resonator; however, this increases the quality factor and introduces the possibility of installing coupling screws. The principle of generation of triple-mode was investigated by parametric analysis. The generated triple-mode is TE011 mode and two orthogonally generated HEM121 modes. By adjusting the radius of the dielectric resonator, the height of the dielectric resonator, or the radius of the cylindrical metallic cavity, three modes could be coincided. However, the height of the metallic cavity keeps three modes separated. The mode characteristics of the proposed cavity are analyzed using a full-wave electromagnetic (EM) simulation. The proposed triple-mode cavity could be developed to triple-mode filter using a coupling screw, and the commercial application for the miniaturized filter below 1 GHz could be expected.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.36-38
• /
• 2005

This study is about how to lower the driving voltage that enables to move the micro droplet by the EWOD (Electro Wetting On Dielectric) mechanism. EWOD is well known that it is used ${\mu}-TAS$ digital micro fluidics system. As the device which is fabricated with dielectric layer between electrode and micro droplet is applied voltage, the hydrophobic surface is changed into the hydrophilic surface by electrical property. Therefore, EWOD induces the movement of micro droplet with reducing contact angle of micro droplet. The driving voltage was depended on the dielectric constant of dielectric layer, thus it can be reduced by increase of dielectric constant. Typically, very high voltage ($100V{\sim}$) is used to move the micro droplet. In previous study, we used $Ta_{2}O_{5}$ as the dielectric layer and driving voltage was 23V that reduced 24 percent compared with $SiO_2$. In this study, we used $BZN(Bi_{2}O_{3}ZnO-Nb_{2}O_{5})$ layer which had high dielectric constant. It was operated the just 12V. And micro droplet was moved within Is on 15V. It was reduced the voltage until 35 percents compare with $Ta_{2}O_{5}$ and 50 percents compare with $SiO_2$. The movement of micro droplet within 1s was achieved with BZN (ferroelectrics)just on 15V.

• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.31-36
• /
• 2001

고온용 정전기척(high-temperature electrostatic chuck, HTESC)에 적합한 특성의 유전재료를 개발하였다. 유전층의 전기비저항과 유전상수 값은 HTESC가 적합하게 작동하기에 필요한 요구조건을 만족하였으며, 하부절연층재료와 열팽창계수가 유사하여 구조적인 안정성이 확보되었다. 유전층과 절연 층간의 접합층 재료로는 입자오염 문제의 최소화를 위해 붕규산염 유리재료를 선택하였고, 전극재료로는 은을 사용하였다. 상부유전 층과 하부절연층 사이에서 붕규산염 유리는 안정되게 접합되었으며, 우려 되었던 은전극의 유전층이나 유리층과의 확산 및 반응이 관찰되지 않았다. 제조된 HTESC의 척킹(chucking)특성은 상용 HTESC에 비하여 우수하게 나타났다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.173-176
• /
• 1998

The surface wave launcher from the dielectric coated coaxial cable to dielectric slab is investigated. FDTD method using local subcell and contour-path model is applied to determine the fine geometrical features. The reflection coefficient in coaxial cable region is found using extract algorithm. In this paper, two structures are presented as coaxial slot surface wave launcher. One structure has a vertical launching angle, and the other has an arbitrary launching angle. The numerical results show that a certain launching angle is minimized the reflection coefficient.