• 한국결정성장학회지
• /
• 제12권6호
• /
• pp.311-316
• /
• 2002

2-step 증착법과 Bias-Enhanced Nucleation(BEN)법을 이용해 다결정 Ni 기판에 고품질의 다이아몬드 박막 합성을 연구하였다. $810^{\circ}C$에서 1시간 증착하여 soot충을 형성시킨 후 기판온도를 soot층의 형성이 억제되는 온도인 $925^{\circ}C$로 올려 5시간 증착하는 2-step법을 통해 고품질의 다이아몬드를 합성할 수 있었다. 또한, $925^{\circ}C$에서 -220V의 bias를 10분 동안 기판에 인가한 후 2시간 동안 증착하는 BEN법을 이용해 양질의 다이아몬드를 합성할 수 있었다. $925^{\circ}C$에서 bias 처리를 하지 않은 경우에는 10시간 동안 증착을 시도한 후에도 다이아몬드가 생성되지 않았다.

• 한국재료학회지
• /
• 제10권9호
• /
• pp.593-600
• /
• 2000

본 연구에서는 도핑하지 않은 다이아몬드 박막에서의 전류전도 경로를 체계적으로 규명하고 다이아몬드 박막의 전도기구에 대해 조사하였다. 도핑되지 않은 다결정 다이아몬드 박막에서 두께와 측정방향에 따른 교류 임피던스법에 의해 측정된 저향값이 기존의 표면전도 모델과는 일치하지 안니하였다. 다이아몬드 박막에 구리를 전기도금한 결과 구리는 결정립계에만 불연속적으로 도금되었고 다이아몬드 박막 위에 은을 증착한 후 전지에칭을 한 결과 결정립계가 우선 에칭이 되어 전류가 결정립계를 통하여 흐름을 확인하였다. 또, 리본형 다이아몬드 박막의 표면을 절연층으로 형성시킨 후 박막 내부의 결정립계를 통하여 전류가 흘러 전기도금이 되는 것으로부터 다결정 다이아몬드 박막의 주요 전기전도 경로는 결정립계임을 확인하였다. 높은 전기전도도를 보여주는 다이아몬드 박막은 전도 활성화 에너지가 45meV 정도이었고 dangling bond 밀도는 낮았다. 그러나 산소 열처리나 수소플라즈마처리가 Si passivation 이론과는 반대로 dangling bond 밀도를 증가시키면서 전기전도성을 떨어뜨렸다. 이 결과들과 표면의 탄소화학결합을 연결시켜 높은 전도성을 야기시키는 결합은 H-C-C-H 결합임을 추론하였다.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.28-32
• /
• 2010

Technical demands for aspheric glass lens formed in market increases its application from simple camera lens module to fiber optics connection module in optical engineering. WC is often used as a metal core of the aspheric glass lens, but the long life time is issued because it fabricated in high temperature and high pressure environment. High hard thin film coating of lens core increases the core life time critically. Diamond Like Carbon(DLC) thin film coating shows very high hardness and low surface roughness, i.e. low friction between a glass lens and a metal core, and thus draw interests from an optical manufacturing industry. In addition, DLC thin film coating can removed by etching process and deposit the film again, which makes the core renewable. In this study, DLC films were deposited on the SiC ceramic core. The process variable in FVA(Filtered Vacuum Arc) method was the substrate bias-voltage. Deposited thin film was evaluated by raman spectroscopy, AFM and nano indenter and measured its crystal structure, surface roughness, and hardness. After applying optimum thin film condition, the life time and crystal structure transition of DLC thin film was monitored.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1699-1701
• /
• 1999

We prepared diamond thin films on WC-Co substrate in $H_2-CH_4-O_2$ gas mixture using 13.56MHz RF PACVD. Scanning electron microscopy, X-ray diffraction and Raman spectroscopy were used to analyze the nature of thin film. and Rockwell test to analyze the adhesion between thin film and substrate. The good diamond quality and adhesion was appeared with cemented tungsten carbide substrate treated with oxygen plasma.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1010-1013
• /
• 2006

Hydrogenated Diamond-like carbon (DLC) films were Prepared by the radio frequency plasma enhanced chemical vapor deposition (RF PECVD) method on silicon substrates using methane $(CH_4)$ and hydrogen $(H_2)$ gas for the application to solid lubricant of MEMS devices. We have checked the influence of varying RF power on tribological properties of DLC film. We have checked their performance as two kinds of method such as FFM (Friction Force Microscope) and BOD (Ball-on Disk) measurement. The friction coefficients and the contact number of cycles to steady state decreased as the increase of RF power with FFM and BOD measurement, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.398-401
• /
• 1999

We prepared diamond thin films on WC-Co substrate in a mixtured $H_2-CH_4-O_2$, gas, using 13.%MHz RF PACVD. Scanning electron microscopy, X-ray diffraction and Rarnan spectroscopy were used to analyze the characteristics of thin film, and tribometer of ball-on-disk type were used to test the wear resistance between thin film and substrate. The good diamond quality and wear resistance was appeared with cemented tungsten carbide substrate treated with oxygen plasma.

• 한국세라믹학회지
• /
• 제31권4호
• /
• pp.457-463
• /
• 1994

The growth condition of highly oriented textured diamond film on a (100) Si substrate was investigated as a function of texture orientation. The growth process consisted of biased enhanced nucleation (BEN) and texture growth. The substrate was under the plasma of 6% CH4-94% H2 with negative bias of 200V during the BEN which grounded during the texture growth. The texture orintation changed from <100> to <110> by increasing substrate temperature. The nearly perfect match between textured diamond grains and the Si substrate could be obtained under the condition of <100> texture. The degree of tilt mismatch increased with the increase of deviation of texture orientation from <100>. The degree of twist mismatch appeared to increase abruptly beyond the critical deviation of texture orientation from <100> because the nuclei having the same orientation as the substrate were no more preferred grains for texture formation.

• Tribology and Lubricants
• /
• 제16권3호
• /
• pp.188-193
• /
• 2000

An experimental study was performed to discover the effect of environment on the tribological behavior of Si-incorporated diamond-like carbon(Si-DLC) film slid on a steel ball. The films were deposited on Si(100) wafers by a radio-frequency glow discharge of mixtures of benzene and dilute silane gases. Experiments using a ball-on-disk test-rig was performed in vacuum, dry air and ambient air conditions. It was observed that coefficient of friction decreased as the environment changed from vacuum, to dry air. Chemical analyses of debris suggested that low and stable friction is closely related to the formation of silicon-rich oxide debris and the rolling action.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.25-31
• /
• 2019

In this study, a new adhesion evaluating equipment and data processing methods were developed to overcome some limitations of existing evaluating equipment. Nano-diamond coated tool is a specimen of experiment. When applying frictional force and shear force on the specimen by a rotating polishing pad, delamination occurs at a moment. During each experiment, the vibration, load, and torque is obtained by accelerometer, loadcell and torque s+ kpensor. Frictional force and coefficient of friction are obtained by calculating torque and load. Based on FFT transformation, acceleration is processed and analyzed. As a result, the moment of delamination and the load at that time can be detected by the new developed equipment and measurement system. Finally, we call this load as an Adhesion force.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제16회 학술발표회 논문개요집
• /
• pp.173-173
• /
• 1998