• 제목/요약/키워드: Diagnostic gateway

검색결과 10건 처리시간 0.019초

Automotive Diagnostic Gateway using Diagnostic over Internet Protocol

  • Lee, Young Seo;Kim, Jin Ho;Jeon, Jae Wook
    • IEIE Transactions on Smart Processing and Computing
    • /
    • 제3권5호
    • /
    • pp.313-318
    • /
    • 2014
  • Recently, Ethernet-based Diagnostic Over Internet Protocol (DoIP) was applied to automotive systems, and in-vehicle gateways have been introduced to integrate Ethernet with traditional in-vehicle networks, such as the local interconnect network (LIN), controller area network (CAN) and FlexRay. The introduction of in-vehicle gateways and of Ethernet based diagnostic protocols not only decreases the complexity of the networks, but also reduces the update time for ECU software reprogramming while enabling the use of a range of services, including remote diagnostics. In this paper, a diagnostic gateway was implement for an automotive system, and the performance measurements are presented. In addition, a range of applications provided by the diagnostic gateway are proposed.

리프로그래밍 시간 단축을 위한 차량 게이트웨이 개선 방안 (Method of In-Vehicle Gateway to Reduce the Reprogramming Time)

  • 김진호;하경재
    • 융합정보논문지
    • /
    • 제9권7호
    • /
    • pp.25-32
    • /
    • 2019
  • 본 논문에서는 차량 ECU(Electronic Control Unit)의 리프로그래밍 시간 단축을 위한 차량 게이트웨이 개선 방안을 제안한다. 리프로그래밍 시간 단축을 위해 게이트웨이는 리프로그래밍을 진행하는 동안 리프로그래밍하는 ECU가 연결된 통신 채널에 리프로그래밍 이외의 메시지 전송을 금지하여야 하며, 이때 메시지 전송 금지로 인해 특정 ECU가 CAN 통신 수신 불가로 인한 고장이 발생하지 않도록 할 수 있어야 한다. 또한, 게이트웨이 내의 버퍼 오버플로우를 방지하기 위해 연속된 통신 메시지 전송 시 추가하는 지연 시간(STmin)을 최소로 할 수 있어야 한다. 이를 위해 본 논문에서는 UDS(Unified Diagnostic Services)의 링크 제어 명령 및 최신 MCU(Micro Controller Unit)에서 제공되는 HW 게이트웨이 기능을 이용한 개선 방안을 제안한다. 제안한 개선 방안은 차량에서 널리 사용되고 있는 인피니언사의 TC275 기반 임베디드시스템을 이용하여 구현하였으며, 개선된 실험 결과를 제시한다.

양수발전소 발전-전동기 운전중 감시 시스템의 개발 (Development of On-Line Monitoring System for Pumped Storage Generator/Motor)

  • 김희동;주영호
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제53권3호
    • /
    • pp.168-174
    • /
    • 2004
  • On-line monitoring system(OMS) has been developed for the pumped storage generator/motor The OMS is applied to diagnosis of the PD(partial discharge) activity of stator insulation, the shorted-turn of rotor winding and the variation of the air-gap between stator and rotor. The OMS consists of DAS(data acquisition system), main server system, gateway and display PC. The DAS measures the PD, the shorted-turn and air-gap from three sensors installed on the generator/motor. The gateway controls the data which sent by DAS. The main server system saves the data, analyzes the data and conducts the diagnostic algorithm. The display PC shows the diagnostic results of partial discharge, shorted-turn and air-gap. Field tests were conducted using PDA(partial discharge analyzer). The results of the OMS and PDA measurements can be directly correlated with normalized quantity number(NQN), PD magnitude(Qm) and PD pattern.

Production Equipment Monitoring System Based on Cloud Computing for Machine Manufacturing Tools

  • Kim, Sungun;Yu, Heung-Sik
    • 한국멀티미디어학회논문지
    • /
    • 제25권2호
    • /
    • pp.197-205
    • /
    • 2022
  • The Cyber Physical System(CPS) is an important concept in achieving SMSs(Smart Manufacturing Systems). Generally, CPS consists of physical and virtual elements. The former involves manufacturing devices in the field space, whereas the latter includes the technologies such as network, data collection and analysis, security, and monitoring and control technologies in the cyber space. Currently, all these elements are being integrated for achieving SMSs in which we can control and analyze various kinds of producing and diagnostic issues in the cyber space without the need for human intervention. In this study, we focus on implementing a production equipment monitoring system related to building a SMS. First, we describe the development of a fog-based gateway system that links physical manufacturing devices with virtual elements. This system also interacts with the cloud server in a multimedia network environment. Second, we explain the proposed network infrastructure to implement a monitoring system operating on a cloud server. Then, we discuss our monitoring applications, and explain the experience of how to apply the ML(Machine Learning) method for predictive diagnostics.

전산화단층촬영 관상동맥조영술: 분획혈류예비력과 심근관류 영상 (Beyond Coronary CT Angiography: CT Fractional Flow Reserve and Perfusion)

  • 김문영;양동현;추기석;이활
    • 대한영상의학회지
    • /
    • 제83권1호
    • /
    • pp.3-27
    • /
    • 2022
  • 심장 전산화단층촬영은 비약적인 기술발전과 다양한 연구 결과를 바탕으로 심혈관위험 계층화와 치료 결정을 위한 관상동맥 질환의 진단과 예후 평가성능이 입증되었다. 전산화단층촬영 관상동맥조영술은 폐쇄성 관상동맥 질환에 대한 음성 예측도가 높아서 침습적 혈관조영술의 빈도를 줄일 수 있는 관상동맥 질환 관련 검사의 관문으로 부상했지만, 진단특이도가 상대적으로 낮다. 하지만 심장 전산화단층촬영을 이용한 분획혈류예비력과 심근관류를 분석하여 관상동맥 질환의 혈역학적 유의성을 확인하는 기능적 평가를 통해 그 한계를 극복할 수 있다. 최근에는 이를 보다 객관적이고 재현 가능하도록 인공지능을 접목하는 연구들이 활발히 진행되고 있다. 본 종설에서는 심장 전산화단층촬영의 기능적 영상화 기법들에 대해 알아보고자 한다.

Multi-level 네트워크의 보안 도메인을 위한 통합 아키텍쳐 설계 및 효율성 측정방법 연구 (A Study for the Designing and Efficiency Measuring Methods of Integrated Multi-level Network Security Domain Architecture)

  • 나상엽;노시춘
    • 디지털산업정보학회논문지
    • /
    • 제5권4호
    • /
    • pp.87-97
    • /
    • 2009
  • Internet network routing system is used to prevent spread and distribution of malicious data traffic. This study is based on analysis of diagnostic weakness structure in the network security domain. We propose an improved integrated multi-level protection domain for in the internal route of groupware. This paper's protection domain is designed to handle the malicious data traffic in the groupware and finally leads to lighten the load of data traffic and improve network security in the groupware. Infrastructure of protection domain is transformed into five-stage blocking domain from two or three-stage blocking. Filtering and protections are executed for the entire server at the gateway level and internet traffic route ensures differentiated protection by dividing into five-stage. Five-stage multi-level network security domain's malicious data traffic protection performance is better than former one. In this paper, we use a trust evaluation metric for measuring the security domain's performance and suggested algorithm.

이중화 구조를 가진 변전소자동화시스템의 개발 (The Development of Dual Structured Power Management System)

  • 우천희;이보인
    • 전기학회논문지P
    • /
    • 제59권3호
    • /
    • pp.275-288
    • /
    • 2010
  • In order to improve the quality of electricity in large scale power systems, stability of power system has to be achieved. This can be done by the means of preventative diagnosis of power equipments and protection, monitoring and control of the power system. Since the recent adoption of digital controllers, an improvement in stability was observed; in particular, IED, which contained self-diagnostic abilities such as fault tolerance, allowed for automatic recovery via redundancy or switching-over functions should there be faults with the equipments. Furthermore, communication lines have been hugely simplified, thus adding to the improvement in stability significantly. Taking these error reports and forecasting emergency reports and by effectively responding to them in the overiding controlling systems, high levels of system stability can be obtained. Power Management System that is being applied to automated power sub-stations, takes the IEC61850 international standard as its specification. In this paper, additional research into achieving stability of already developed PMS system and also the stability of the overall system was carried out, and the results of development of communication servers, which play a pivotal role in connecting systems, are stated.

Development of an Early Diagnostic Device for African Swine Fever through Real-time Temperature Monitoring Ear-tags (RTMEs)

  • Taehyeun Kim;Minjong Hong;JungHwal Shin
    • 센서학회지
    • /
    • 제32권5호
    • /
    • pp.275-279
    • /
    • 2023
  • Throughout the 20th century, the transition of pig farms from extensive to intensive commercial operations amplified the risk of disease transmission, particularly involving African swine fever (ASF). Real-time temperature monitoring systems have emerged as essential tools for early ASF diagnosis. In this paper, we introduce new real-time temperature monitoring ear tags (RTMEs) modeled after existing ear tag designs. Our crafted Pig-Temp platforms have three primary advantages. First, they can be effortlessly attached to pig ears, ensuring superior compatibility. Second, they enable real-time temperature detection, and the data can be displayed on a personal computer or smartphone application. Furthermore, they demonstrate excellent measurement accuracy, ranging from 98.9% to 99.8% at temperatures between 2.2 and 360℃. A linear regression approach enables fever symptoms associated with ASF to be identified within 3 min using RTMEs. The communication range extends to approximately 12 m (452 m2), enabling measurements from an estimated 75 to 2,260 pigs per gateway. These newly developed Pig-Temp platforms offer singifcant enhancement of early ASF detection.

초고속 정보통신망을 통한 3차원 영상 정보의 가상현실 관리에 관한 연구 (A Study on Virtual Reality Management of 3D Image Information using High-Speed Information Network)

  • 김진호;김지인;장천현;송상훈
    • 한국정보처리학회논문지
    • /
    • 제5권12호
    • /
    • pp.3275-3284
    • /
    • 1998
  • 본 논문에서는 각종 단층 촬영 의료영상 장비로 촬영한 2차원 단면화상 데이터들을 차원 재구성 알고리즘을 사용하여 3차원 영상으로 재구성한 다음, 웹 서버의 데이터베이스에 저장하고 관리하며, 인터넷 가상현실 표준언어인 VRML(Virtual Reality Modeling Language)로 표현된 3차원 의료영상을 비롯한 각종 의료영상 정보를 웹브라우저를 사용하여 검색해 볼 수 있는 의료영상정보시스템(Medical Image Information System)에 관하여 기술한다. 본 연구를 통하여 개발한 의료영상정보시스템에서는 단층 촬영된 2차원 단면화상을 처리한 다음, 3차원 의료 영상을 생성하기 위하여 표면기반 랜더링 방법(Surface-based Rendering Method)을 사용하였다. 인터넷을 통하여 전송되는 영상파일의 크기를 줄이기 위하여 삼각형 매쉬(Triangle Meshes)을 이루는 다각형의 개수를 줄이는 알고리즘을 사용하며, 3차원 의료영상 데이터의 크기를 약 50%이상 줄일 수 있다. 아울러, 3차원 영상 데이터 파일을 압축을 하게 되면 파일의 크기를 80%이상 줄일 수 가 있으므로 웹상에서 신속하게 3차원 의료영상 데이터를 검색할 수 있고, 의료영상을 VRML을 사용하여 표현하므로 고성능의 그래픽 카드가 없는 일반 PC에서도 인터넷을 통하여 디스플레이 할 수 있다. 또한, CGI(Common Gateway Interface)방식을 사용하여 서버의 데이터베이스에 저장되어 있는 CT(Computerized Tomography), MRI(Magnetic Resonance Imaging), PET(Positron Emission Tomography), SPECT(Single Photon Emission Computed Tomography)등의 단층 촬영 장비로 촬영한 다양한 종류의 디지털 의료영상을 사용자에게 의료영상정보시스템을 통하여 2차원 단면화상 또는 3차원 영상으로 표현하여 보여주고, 환자에 관한 각종 정보와 진단정보 등을 신속하게 제공한다. 본 논문에서 제안하는 의료영상정보시스템은 초고속 정보통신 망을 통하여 원격의료시스템을 구축하는데 활용될 수 있을 것이다.

  • PDF