• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.283-286
• /
• 1996

This study suggests a new methodology for the fault diagnosis based on the signed digraph in developing the fault diagnosis system of a boiler plant. The suggested methodology uses the new model, fault-effect tree. The SDG has the advantage, which is simple and graphical to represent the causal relationship between process variables, and therefore is easy to understand. However, it cannot handle the broken path cases arisen from data uncertainty as it assumes consistent path. The FET is based on the SDG to utilize the advantages of the SDG, and also covers the above problem. The proposed FET model is constructed by clustering of measured variables, decomposing knowledge base and searching the fault propagation path from the possible faults. The search is performed automatically. The fault diagnosis system for a boiler plant, ENDS was constructed using the expert system shell G2 and the advantages of the presented method were confirmed through case studies.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2278-2288
• /
• 2017

Multilevel converter topologies are widely used in many applications. The cascaded H-bridge multilevel inverter (CHBMI), which is one of many multilevel converter topologies, has been introduced as a useful topology in high and medium power. However, it has a drawback to require a lot of switches. Therefore, the reliability of CHBMI is important factor for analyzing the performance. This paper presents a simple switch fault diagnosis method for single-phase CHBMI. There are two types of switch faults: open-fault and short-fault. In the open-fault, the body diode of faulty switch provides a freewheeling current path. However, when the short-fault occurs, the distortion of output current is different from that of the open-fault because it has an unavailable freewheeling current flow path due to a disconnection of fuse. The fault diagnosis method is based on the zero current time analysis according to zero-voltage switching states. Using the proposed method, it is possible to detect the location of faulty switch accurately. The PSIM simulation and experimental results show the effectiveness of proposed switch fault diagnosis method.

• 소음진동
• /
• 제8권5호
• /
• pp.929-935
• /
• 1998

Safety diagnosis of electric train driving system is performed using vibration signals of running electric train. Safety diagnosis is tried on the viewpoints of the appreciation of superannuation and the fault diagnosis of motor, reduction gear and bogie. The appreciation of superannuation is checked by the vibration levels of driving parts and the fault diagnosis is done by analyzing the frequencies of the vibration signals which are measured directly from a running electric train. The results shows that the vibration levels of each parts increase as the train gets older and each parts have their own frequency patterns of the vibration. Vibration propagation path is also investigated using calculated the coherence value between bogie and driving system. As the results, it is known that vibration signal can be utilized successfully for the safety diagnosis of the driving part of electric train.

• 대한의용생체공학회:의공학회지
• /
• 제36권1호
• /
• pp.1-6
• /
• 2015

This study aims to design a monolayer cell adsorption apparatus that would help to produce high-quality slides for Liquid-Based Cytology (LBC) of an early cancer diagnosis for human bodies. The LBC collects exfoliated cells of human bodies and spreads the cells on the slides. Through processes of dyeing and cytological examination, the LBC screens for cancers in early stage. In this study, both of a cell suction module and a cell adsorption module, which are the key elements of the monolayer cell adsorption apparatus, were developed, and using those modules, the study set, first, conditions to help both GYN and NON-GYN apply principal cells without de-endothelialization before conducting its own analysis on the utility. As a results, for GYN, apparatus was determined to be able to produce high-quality slides under the condition of 4 and for NON-GYN, the apparatus would come up with other slides of high-quality under the condition of 2. The study carried out a repetitive test on selected conditions and proved 96% of the repetitive success rate. By the results of what has been learned so far, the study presents that the apparatus has a possibility to replace device from South Korea as one of those other currently-applied systems to run the LBC and that the system will also present a new paradigm for cancer diagnosis as it makes a contribution to the improvement in the LBC.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2656-2664
• /
• 2015

본 연구는 위암 진단 당시 진단 경로에 따라 병기 및 관련요인의 차이가 있는지 비교하기 위해 시행되었다. 조사대상은 충남대학교 병원에서 위암에 대해 진단 받은 뒤 수술하기 위해 내원한 환자 375명으로 하였으며, 자료 수집은 2010년 8월 1일부터 2013년 3월 31일까지 표준화된 자기기입식 설문지를 사용하여 수집하였다. 증상군과 검진군간에 영향을 미치는 요인의 위험도를 측정하기 위해 로지스틱회귀분석을 사용 하였다. 연구결과, 검진군에서의 조기위암의 비율이 증상군에서 보다 유의하게 높아(p=0.001) 조기검진의 중요성을 시사해 주었다. 또한 증상군은 검진군에 비해 병기가 상대적으로 높았다.(p=0.001). 앞으로 위암 선별검사가 널리 시행되고 대규모의 전향적인 연구가 뒷받침 되면 우리나라에 가장 적절한 검사 및 간격에 대한 추정까지도 가능할 것이다.

• 한국항공우주학회지
• /
• 제49권4호
• /
• pp.311-320
• /
• 2021

무인기용 터보제트엔진의 운전 중 발생하는 고장을 실시간으로 진단하기 위한 방안 및 성능 열화와 관련된 건정성 추정에 관해 연구하였다. 이를 위해서, 동적 열역학 가스경로해석을 통한 비선형 동특성 방정식으로부터 실시간 선형모델을 도출하였고, 연출된 운전상황과 고장 발생을 실시간으로 진단하기 위해 칼만필터와 가설 검증에 기초한 확률적 판단 기법을 적용하였다. 이 결과, 분명한 고장 검출과 분리 성능을 보임으로써 그 효용성을 확인하였다. 측정변수를 통한 건전성 추정과 관련하여, 실제 엔진 구성품의 성능 열화 추이를 모사하였고, 적응형 칼만필터를 적용하여 추정 기법의 타당성을 입증함으로써, 상태 기반 고장 진단 및 정비 기법에 효과적으로 사용될 수 있음을 보였다.

• 대한치과의사협회지
• /
• 제50권6호
• /
• pp.304-311
• /
• 2012

Eruption of the teeth can be disturbed by crowding, ectopic eruption path, retention for pathologic condition of follicle and periodontal ligament, local disturbances in the innervation, and delayed eruption for overlying obstacles in the eruption path. Eruption disturbance of permanent posterior teeth is taken with diverse therapeutic approaches according to the patient age, cooperation of patient, tooth position and maturity, degree of impaction, clinical features, and repercussion on the neighboring teeth. However, delayed treatment usually results in less favorable outcomes. Therefore, In order to prevent this situation, periodically radiographic examinations during the early mixed dentition period and early diagnosis of eruption disturbances of permanent posterior teeth are recommended.

• The Journal of Advanced Prosthodontics
• /
• 제2권2호
• /
• pp.46-49
• /
• 2010

BACKGROUND. Though implant dentistry is very successful and predictable in treatment of patients with destroyed dentition, there are some cases with limitations to implant therapy. In these cases, alternative treatment modality should be considered. CASE DESCRIPTION. A patient with destroyed dentition was rehabilitated with a lateral rotational path removable partial denture. According to the diagnosis, we determined to raise vertical dimension for esthetic and functional restoration. The final restoration was performed after four months of provisional period. CLINICAL IMPLICATION. The edentulous patients with compromised esthetics and functions can be successfully treated with a rotational path removable partial denture through adequate treatment planning and precise laboratory procedure.

• Journal of the Korean Data and Information Science Society
• /
• 제18권4호
• /
• pp.985-994
• /
• 2007

We note that the time of adolescents is very important time for obtaining informations about their jobs, exploring and making appropriate their career decision. In order to understand the career decision level of adolescents, we needed a study on effects of personal variables and family variables affecting the career decision level. For this, we provide direct, indirect and total effects of family variables and personal variables on the career decision level using the path analysis. Therefore, in this study, we give the real usefulness for making a different diagnosis and strategy solving some problems of career decision level.

• 대한전자공학회논문지SD
• /
• 제44권11호
• /
• pp.82-88
• /
• 2007

본 논문에서는 패턴 비교를 통해 고장 대상 후보를 줄이는 알고리즘을 제안한다. 고장 대상 후보의 개수는 고장 진단을 위한 고장 시뮬레이션 시간을 결정한다. 그렇기 때문에 전체 고장 진단 시간을 줄이기 위해서는 고장 대상 수를 줄이는 것이 필수적이다. 임계 경로 추적은 회로의 최종 출력에서부터 시작해 후방 추적을 통해 고장 대상 후보를 결정한다. 제안하는 알고리즘은 이러한 임계 경로 추적을 하는 동안에 고장이 발견되지 않은 패턴에서와 고장이 발견된 패턴에서의 논리 값을 비교하여 고장 대상 후보를 줄이는 알고리즘이다. 고장 진단을 하는데 있어서 고장 대상 후보를 줄이는 것은 전체 고장 진단 시간에 있어 가장 큰 부분을 차지한다. 때문에 제안하는 알고리즘은 기존의 후방 추적을 이용한 방식보다 고장 진단 시 매우 빠른 성능을 보인다. 또한 조합회로와 순차회로의 모든 경우에 적용이 가능하다. 본 논문에서는 ISCAS#85회로와 ISCAS#89의 회로들을 가지고 실험을 하여 기존의 고장 진단 방식의 경우보다 얼마나 성능이 좋아졌는지 보이도록 하겠다.