• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.45-52
• /
• 2020

Recently, design for additive manufacturing (DfAM) technology has become a prominent design methodology for exploiting 3D printing, which leads the Fourth Industrial Revolution. When manufactured by the 3D printing method, it is possible to produce several shapes compared to the conventional casting or cutting process. DfAM-as a newly-proposed design methodology-can be used to specially design products with various shapes to apply functional requirements. Topology optimization verifies load paths to determine the draft design, and a shape-optimized design with objective functions for weight reduction enables efficient lightweight product design. In this study, by using these two DfAM technologies, a lightweight and optimal design is constructed for a node part of a vehicle body with a space frame designed for a lightweight vehicle. DfAM methodologies for concept design and detailed design, and the associated results, are presented. Finally, the product was additively manufactured, a fatigue performance test was performed, and the design reliability was verified.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.5
• /
• pp.294-302
• /
• 2021

In this study, the 3D printing technique called design for additive manufacturing (DfAM) that is widely used in various industries was applied to marine leisure ships of equipment. The DfAM for the stanchion for crew safety was applied to the equipment used in an actual recreational craft. As design constraints, the design alternatives were not to exceed the safety and weight of the existing stainless steel material, which were reviewed, and the production of a low-cost FFF-type 3D printing method that can be used even in small shipyards was considered. Until now, additive manufacturing has been used for manufacturing only prototypes owing to its limitations of high manufacturing cost and low strength; however, in this study, it was applied to the mass production process to replace existing products. Thus, a design was developed with low manufacturing cost, adequate performance maintenance, and increased design freedom, and the optimal design was derived via structural analysis comparisons for each design alternative. In addition, a life-cycle assessment based on the ISO 1404X was conducted to develop sustainable products. Through this study, the effectiveness of additive manufacturing was examined for future applications in the shipbuilding industry.

• Journal of Life Science
• /
• v.6 no.4
• /
• pp.278-285
• /
• 1996

This experiments was conducted to determine the effect of dietary fiber(DF) levels with diets of isocaloric (3,010 kcal/1kg diet) and isoprotein(21% of diet) on colored brolier chicks(Juk jun hatchery farm). Four groups of 6 chicks 4 replication. were fed corn-soy meal diets containing 0% (DF, 5%), 2%(DF, 6%), 4%(DF, 7%), and 6%(DF, 8%) of dehydrated alfalfa meal(AM) from 21 to 42 days of age. The addition of dietary fiber levels to the broiler chicks diets did noty affect body weight, feed efficiency, energy efficiency and protein efficiency, but affect feed intake of chicks fed 6% of fiber. The level of fiber diets did not affect gizzard weight of female(1.45g/100g BW) and male(1.25g/100g BW), but affect small intestine length of female. When comparing two the dietary fiber levels, 5% and 8%, the contents of the total serum cholesterol was slightly higher in chicks fed 5% of fier than that of 8% without significant. However, total serum cholesterol levels of female(121mg/dl) and male(119mg/dl) were not influenced by increased dietary fiber levels. The liver weight was not influenced by increasing of dietary fiber levels (female 2.03g and male 2.05g/100g BW). The yields of dressed weight(72% of shrunk body weight), skin weight)11% of dressed weight) were not influenced by increased dietary fiber.

• Applied Microscopy
• /
• v.45 no.1
• /
• pp.23-31
• /
• 2015

Dark field (DF) transmission electron microscopy image has become a popular characterization method for two-dimensional material, graphene, since it can visualize grain structure and multilayer islands, and further provide structural information such as crystal orientation relations, defects, etc. unlike other imaging tools. Here we present microstructure of graphene, particularly, using DF imaging. High-angle grain boundary formation wass observed in heat-treated chemical vapor deposition-grown graphene on the Si substrate using patch-quilted DF imaging processing, which is supposed to occur by strain around multilayer islands. Upon the crystal orientation between layers the multilayer islands were categorized into the oriented one and the twisted one, and their local structure were compared. In addition information from each diffraction spot in selected area diffraction pattern was summarized.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.3
• /
• pp.193-197
• /
• 2018

Objective: The relationship between the rest intervals during physical tasks and performance enhancement has been studied. However, whether or not different rest intervals would result in altered multiplanar ankle kinematics during performance of the Star Excursion Balance Test (SEBT) is unknown. Method: Fifteen healthy subjects (7 males and 8 females) without a history of ankle injuries were participated in this study. 3 rest intervals of 10, 20, and 40 seconds were used during the current study. Three visits were required in order to complete the 3 rest intervals. Variables of interest included dorsiflexion (DF) excursion, tibial internal rotation (TIR), and eversion (EV) excursions. The means of ankle angular excursions were compared across the 3 directions in the 3 rest interval groups. Results: There were no significant main effects for any variables between restintervals. However, DF excursion in the anteromedial (AM) direction was greaterthan in both the medial (M) and posteromedial (PM) directions and was greater in the M direction compared to the PM direction. TIR excursion in the AM direction was less than in both the M and PM directions. Conclusion: Different rest intervals ranging from 10 to 40 seconds did not influence ankle angular excursions during the SEBT in a healthy population. However, our results suggest that multiplanar motion is necessary during the SEBT and differs depending on the direction of movement.

• KIEAE Journal
• /
• v.10 no.3
• /
• pp.43-50
• /
• 2010

Natural lighting is directly connected with our mental and physical health. For working or learning effect, the proper natural lighting is required for improving our living conditions. School facilities, especially, are the place where includes students' ordinary activities with learning behaviors during the school years from elementary to high school. This study was carried out for the purpose introducing a basic database in that planning a school by researching on the actual in the natural lighting system of some schools' classroom, estimating, and analyzing through a simulation, which resulted in a method of improving the natural lighting system. As a result of measuring and analyzing Daylight Factor(DF) during the time from 9 am to 3 pm when students are activating in their classroom, generally DF range of the sides near to window and aisle seats zone are not distributed well. Besides, two out of four school which are researched would not reach the standards of the law for school sanitary while rest of the schools meet the standards; Average DF 5% and Minimum DF 2%. And the result of a simulation by RADIANCE program shows the most appropriate DF range when it is applied in variable numbers about an oriehows the- South-east 15, south-east 30, south-east 45, south-west 15, south-west 30, and south-west 45 degrees. When it is applied in the variable numbers about glass transmittance - 60%, 70%, and 80% in condition facing south of a classroom, the result shows that the DF range of 80% transmittance is relatively higher than other glasses in the classroom. Thus, when a school is built, plans for an orientation is necessary for improve of elementary schools' environment with the glass installation which is made for high transmittance and is regarded with the students' activities time.

• Korean Journal of Veterinary Service
• /
• v.19 no.2
• /
• pp.115-125
• /
• 1996

A total of 315 microorgainisms were isolated from 256 pneumonic lung samples of pig in abattoirs of northern Chungnam area during February to November 1994, and Identified 97 strains as Pusteurella multocida, 89 strains as Staphylococcus spp, 54 strains as Streptococcus spp, 22 strains as Mycoplasma spp, 21 strains as Escherichia coli, 18 strains as Haemophilus parsuis, 11 strains as Corymebacteroi, pyogenes, and 3 strains as Acrinobacillus spp by Gram's and Dienes stain, and biological properties test Involved API system. After that, they were examined anti biotic susceptibility for ampicillin(AM), cephalothin(CF), chloramphenicol(CP), erythromycin(EM), kanamycin(KM), gentamicin(GM), neomycin(NM), penicillin(PC), streptomycin(SM), tetracycline(TE), tiamulin(TIA), tylosin(TYL), methicillin(DP), colistin(CL) and trimet hoprim(SXT). In antibiotics susceptibility test, 293 isolates except Mycoplasma spp 22 strain were highly susceptible to DF(79.2%) and AM(76.2%), but resistant to PC(14.0%), NM(19.5%) and KM (23.2%) The multiple drug resistant patterns were noted in most isolates, whereas only 7 isolates resistant to single drugs.