• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.1
• /
• pp.101-112
• /
• 2002

Purpose: This study evaluated the accuracy of electronic devices compared with mercury sphygmomanometer. Of 132 outpatients with electronic devices. 77 who possessed oscillometric cuff devices participated in this study. Method: When the blood pressure was measured, all electronic devices were connected by means of a Y-connector to a mercury sphygmomanometer. Using the simultaneous same arm approach, each comparison was carried out three times at 2-minute intervals. Results: Compared with the mercury sphygmomanometer, the electronic devices underestimated systolic and diastolic blood pressure, respectively by $4.0{\pm}5.8mmHg$ and $2.5{\pm}67mmHg$, which satisfies the standard error range of the American Association for the Advancement of Medical Instrumentation. According to the British Hypertension Society criteria, these differences achieved C grade for both systolic and diastolic pressure. For the graphical analysis, the differences had a tendency to fulfill the permitted error limits in both diastolic and systolic blood pressure. Moreover, the purchase duration was not correlated with the accuracy of electronic devices. Conclusion: These results indicate that difference in blood pressure between electronic devices and mercury sphygmomanometer is within the standard error. Therefore, electronic blood pressure measuring devices may be useful for therapeutic self-management of hypertension.

• Journal of Multimedia Information System
• /
• v.2 no.2
• /
• pp.223-232
• /
• 2015

In this system, mobile devices are not independent, they can communicate with each other, one device's change can affect the whole system or other devices. To achieve the above mentioned A Self-Reconfigurable System of Contents, through discover the device and connect process, to establish the connection between the mobile devices. After user assigns two dimension display type, the user can select content to input the system, contents are portioning and broadcast to devices. The system can self-reconfigure contents rapidly and exactly. This technique supports contents self-reconfiguration for devices remove, addition and position exchange. In this paper, when the user uses the hand contacts device, the device sends a signal to assist the system to detection device's position. The system does not need to get accurate devices moving direction, just according to all changed devices position to judge where the devices destination is. This research develops an application according to this technique, and the real machine tests the application using Android platform. Some communication protocols and mathematical modeling methods are proposed. These methods can also be used in other Internet of Things (IoT) fields, such as Drones Navigation, Smart Home, and Informational City management.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.959-962
• /
• 2003

This study is the effect of lithium Lithium Complex as an electron injection layer(EIL) on the performance of organic light emitting devices (OLEDs) and optimized the device efficiency by varying thickness of EIL layer. The device with 2nm GDI 101 layer showed significant enhancement of the device performance and device lifetime. We also compared GDI 109 and GDI 117 with GDI 101 as an electron injection layer.

• International Commerce and Information Review
• /
• v.9 no.2
• /
• pp.423-439
• /
• 2007

The purpose of this study was to analyze market competitiveness of Korean and Chinese computer parts industry in the between two countries' market by using Index of Export Bias and Market Comparative Advantage Index. For attaining the purpose of study, we classified the computer parts which exported to the two countries' market and the imported products as the memory devices and input/output peripheral devices. Analyzing period was 2001-2006. The analysis of Korean results of Index of Export Bias indicated that memory devices represented low overall numerical value and the Chinese results of Index of Export Bias indicated that memory devices represented high gradual numerical value. On the other hand, Korean input/output peripheral devices have been increasing steadily for analysis period and China input/output peripheral devices have been decreasing steadily for analysis period. Additional results indicated that the Korean and China computer parts which gained market competitiveness between two countries market were as follows. Korean memory devices have been losing competitiveness in the China market steadily and Chinese memory devices have been acquire competitiveness in the Korean market gradually. In input/output peripheral devices case, Korean products represented powerful competitiveness in the China market and Chinese products have been gaining competitiveness in the Korea market.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.15-22
• /
• 2019

In these days, importance of the power electronic devices and modules keeps increasing due to electric vehicles and energy saving requirements. However, current silicon-based power devices showed several limitations. Therefore, wide band gap (WBG) semiconductors such as SiC, GaN, and $Ga_2O_3$ have been developed to replace the silicon power devices. WBG devices show superior performances in terms of device operation in harsh environments such as higher temperatures, voltages and switching speed than silicon-based technology. In power devices, the reliability of the devices and module package is the critically important to guarantee the normal operation and lifetime of the devices. In this paper, we reviewed the recent trends of the power devices based on WBG semiconductors as well as expected future technology. We also presented an overview of the recent package module and fabrication technologies such as direct bonded copper and active metal brazing technology. In addition, the recent heat management technologies of the power modules, which should be improved due to the increased power density in high temperature environments, are described.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.3
• /
• pp.33-41
• /
• 2022

Recently the use of personal mobility devices is rapidly increasing, and the businesses related to personal mobility devices are quickly growing as well. Although the use of personal mobility devices provides convenience for short distance movements, many problems occur due to the lack of safety devices and the absence of associated road traffic laws. The number of accidents caused by using personal mobility devices continues increasing every year, and the injuries or deaths are seriously happening with those accidents. When using personal mobility devices, there are basic safety precautions such as wearing a helmet, prohibiting boarding with more than two people, prohibiting boarding with more than 100kg, prohibiting using after drinking alcohol, and so on. However, it is exposed to traffic accidents because there is no way to check before using the system. Therefore, to ensure the user's safety in using the electric kickboard among personal mobility devices, this paper proposes a system that can check the user's safety state before using the electric kickboard. It is possible to safely use personal mobility devices and prevent accidents by proposing a system structure of the electric kickboard that can be used after checking for the use of more than two people, overweight, wearing a helmet, and drinking alcohol.

• Informatization Policy
• /
• v.27 no.3
• /
• pp.39-55
• /
• 2020

This study was designed to analyze the relationship among the motivations for the use of digital devices, attitudes toward the use of digital devices and performance resulting from the use of digital devices in middle-aged and elderly groups by using a path analysis. For an empirical analysis, the 2018 Survey on the Digital Divide by the National Information Society Agency was referenced, analyzing the data of 1,664 people, selected through listwise deletion from total 2,303 people aged 55 or over. A close examination of how measuring variables reflect potential variables (motivations for, attitudes toward and performance resulting from the use of digital devices) showed a significance of 0.001, which suggests that each individual measuring variable does reflect the potential variables. Evaluation of the pathway factors of the structural model from the motivations for the use of digital devices to the attitudes toward the use of digital devices (β=0.847) and from the attitudes toward the use of digital devices to the performance resulting from the use of digital devices (β= 0.745) revealed significant statistical effects. The results of this study suggest that the motivations for the use of digital devices does not directly enhance the digital device use performance, but that it can improve the attitudes toward the use of digital devices, which can in turn increase the performance resulting from the use of digital devices. The analysis holds significance that it has presented practical and policy implications.

• The Journal of the Korea Contents Association
• /
• v.16 no.6
• /
• pp.481-492
• /
• 2016

The purpose of this study is to investigate the satisfaction with repair service of assistive technology devices for the disabled and the current state of the service, find the problems of the repair service, and to seek an effective development plan. This study had been conducted from July to October, 2015, with 750 disabled, and 280 completed questionnaires were returned and analyzed. Among assistive technology devices, the devices that required repair most were mobility devices. Repair was made mostly in purchase agencies and the repair institute. In the satisfaction survey, the causes for somewhat dissatisfaction were long repair time and complicated repair application and procedure. With regard to the central government's roles to active repair service for assistive technology devices, it was found that it was very necessary to expand the promotion of repair support business, come up with the criteria about repair support items and support amount, and establish the legal system to repair assistive technology devices. Therefore, in order to provide more effective and systematic repair service for assistive technology devices, it will be necessary to establish repairing process of assistive technology devices and standardization of costs that repair assistive technology devices.

• Journal of Construction Engineering and Project Management
• /
• v.6 no.2
• /
• pp.1-7
• /
• 2016

Construction in the UK is the second most dangerous industry in terms of fatal and minor injuries according to the 2014 report of HSE. The use of mobile devices such as iPad, Tablets and Smart phones on the live construction projects is also on the increase in the UK due to the 2016 - Level 2 BIM (Building Information Modelling) implementation target, set by the UK Government. Hence, the use of such devices may become a distraction from work activities on the construction sites and will cause a major risk to the end users. The subject of improving safety of BIM use is widely researched, but there is a gap in knowledge about the actual use of the mobile devices and perception of 'Site BIM', on the construction site activities. The main gap identified in the 'Site BIM' is the health and safety aspect of using such devices on the construction sites. A safer way of working with such devices needs to be identified to avoid any potential site hazards and fatalities before the widespread use of the devices are found on the construction projects. In that context, the paper is aimed to highlight the safety issues that are required to address for the successful implementation of the mobile devices for safer use of the 'Site BIM'. Questionnaire survey was used to collect the site information among construction professionals in the UK. The survey findings suggested that a proactive approach may be helpful to stop potential hazards and risks causing by the use of mobile devices and potential measures need to be identified before any injuries and incidents occur. The paper concludes that training, changing size of mobile devices and ensuring a separate induction training for 'Site BIM' tools will improve the health and safety of the end users of the mobile devices at the live construction sites.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.31 no.3
• /
• pp.191-211
• /
• 2020

The main purpose of this research is to identify limitations and problems in access to information using reading aids devices for the visually impaired and to suggest ways to activate the use of alternative materials using reading aids devices. A survey was conducted on adults with visual impairment in order to identify the factors of limitation in using reading aids devices. The analysis resulted in six aspects of limiting factors in activating the use of reading aids devices. The approaches for activating the use of reading aids devices were proposed by dividing them into policy and operational aspects, focusing on the limiting factors derived. Policy aspects suggested developing low-cost reading aids devices, increasing awareness of the devices, and complying with Web standard guidelines for improving the applicability of the devices, while operational aspects suggested reinforcing hearing-use functions, expanding information services related to reading aids devices, and enhancing portability of the devices.