• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.3
• /
• pp.311-326
• /
• 2013

For providing a basic data concerning with a fishing deck layout design of a trawler the authors conducted the video observations about the working activities of crews on the deck in the different layout of two Korean coastal large stern trawlers (gross tonnage: 139). The winch of the trawler-A was installed on the aft of the fishing deck and the trawler-B, on the forward of the fishing deck. The work and activities of the deck hands on both trawlers were observed using the CCD (charge coupled device) camera installed on each trawler's deck for one month from August 3, 2010. The video data was analyzed by the hierarchical task analysis (HTA) method. In results, numbers of tasks to require deck hands during the hauling net and the casting net were 25 and 28 for the trawler-A and 27 and 48 for the trawler-B, respectively. The working processes were represented a same in both of the trawlers. Location for controlling the deck machineries, the location installed trawl winch, kinds of deck machineries, crew's custom for using deck machineries were the factor affecting to the number of the task. In the case of the improvement suggested in the results is carried out, the reduction percentages of the number of task in the trawler-A and trawler-B were estimated as 24.5% and 51.3%, respectively. Through this study it was found that the quantitative analysis is possible for the work processes, work methods and the work contents in the trawler. Also the suggestion for improving the fishing deck layout design of the trawler was possible by finding out the factors increasing the number of tasks and removing the tasks. We expect that the results of this paper are used as a basic data for designing the layout of deck machineries in the trawler in the future.

• Journal of Internet Computing and Services
• /
• v.19 no.3
• /
• pp.57-66
• /
• 2018

EDISON ( EDucation-research Integration through Simulation On the Net) is a web simulation service based on cloud compu-ting. EDISON provides that web service and provide analysis result to users through pre-built infrastructure and various calcu-lation nodes computational science engineering problems that are difficult or impossible to analysis as user's personal resources to users. As a result, a simulation execution environment is provided in a web portal environment so that EDISON can be ac-cessed regardless of a user's device or operating system to perform computational science engineering analysis simulation. The purpose of this research is to design and construct a workbench based real - time dynamic service to provide an integrat-ed user interface to the EDSION system, which is a computational science engineering simulation and analysis platform, which is currently provided to users. We also devised a workbench-based user simulation service environment configuration. That has a user interface that is similar to the computational science engineering simulation software environment used locally. It can configure a dynamic web environment such as various analyzers, preprocessors, and simulation software. In order to provide these web services, the service required by the user is configured in portlet units, and as a result, the simulation service using the workbench is constructed.

• Journal of the Korean Society for information Management
• /
• v.30 no.2
• /
• pp.269-295
• /
• 2013

This study purported to study the uses of information and communication technology (ICT) tools in their daily life among the undergraduate and graduate students majoring science and engineering. It also examined the purposes of the uses of the major ICT tools, the differences in their information technology uses between graduate and undergraduate students. The data were collected from 83 undergraduate and graduate students from four universities using content analysis of an observational logs and a survey questionnaire. The observational logs were collected using an instant message application available on a smart phone. Study results revealed desktop computers, laptop computers, and smart phones as the three most heavily used ICT tools among the participants and typical situations students use each of the three tools. There were also sharp distinctions between graduate and undergraduate students in their selection of the tools, and distinctions between work and non-work situations. The findings of this study can be used to redesign information services and systems for the scientists and engineers in the next generation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.95-99
• /
• 2003

In addition to wired communication technology, wireless communication technology has had communication revolution nowadays. Bluethooth technology carries out data/voice communication within pico-net. Nowadays the various services are supported by access network connected to public network. This paper presents implementation of bluetooth protocol analyser which simulates bluetooth protocol. MS window98 and visual C are used for development environment and application program is operated over the firmware loaded on the bluetooth device connected to the PC through UART which of the maximum transmission rate is 115kbps because transmission rate less than 20kbps affects rarely the performance. The performance analysis on the propose system is carried out as simulating the signalling information for the voice test and the traffics between two bluetooth systems for file transfer. The throughput analysis for file transfer service and call processing capacity for voice service are considered as performance analysis parameters. File access time is very important parameter and throughput is 13 kbps in case breakpoint time to file access is 0.04sec. Also call processing time is about 16.6ms in case of communication with the headset. The performance analysis of simulation results satisfies with bluetooth device development.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2935-2940
• /
• 2023

A polystyrene phantom was developed following the guidance of the International Atomic Energy Association (IAEA) for gamma knife (GK) quality assurance. Its performance was assessed by measuring the absorbed dose rate to water and dose distributions. The phantom was made of polystyrene, which has an electron density (1.0156) similar to that of water. The phantom included one outer phantom and four inner phantoms. Two inner phantoms held PTW T31010 and Exradin A16 ion chambers. One inner phantom held a film in the XY plane of the Leksell coordinate system, and another inner phantom held a film in the YZ or ZX planes. The absorbed dose rate to water and beam profiles of the machine-specific reference (msr) field, namely, the 16 mm collimator field of a GK Perfexion^TM or Icon^TM, were measured at seven GK sites. The measured results were compared to those of an IAEA-recommended solid water (SW) phantom. The radius of the polystyrene phantom was determined to be 7.88 cm by converting the electron density of the plastic, considering a water depth of 8 g/cm². The absorbed dose rates to water measured in both phantoms differed from the treatment planning program by less than 1.1%. Before msr correction, the PTW T31010 dose rates (PTW Freiberg GmbH, New York, NY, USA) in the polystyrene phantom were 0.70 (0.29)% higher on average than those in the SW phantom. The Exradin A16 (Standard Imaging, Middleton, WI, USA) dose rates were 0.76 (0.32)% higher in the polystyrene phantom. After msr correction factors were applied, there were no statistically significant differences in the A16 dose rates measured in the two phantoms; however, the T31010 dose rates were 0.72 (0.29)% higher in the polystyrene phantom. When the full widths at half maximum and penumbras of the msr field were compared, no significant differences between the two phantoms were observed, except for the penumbra in the Y-axis. However, the difference in the penumbra was smaller than variations among different sites. A polystyrene phantom developed for gamma knife dosimetry showed dosimetric performance comparable to that of a commercial SW phantom. In addition to its cost effectiveness, the polystyrene phantom removes air space around the detector. Additional simulations of the msr correction factors of the polystyrene phantom should be performed.

• Imaging Science in Dentistry
• /
• v.54 no.1
• /
• pp.81-91
• /
• 2024

Purpose: The objective of this study was to propose a deep-learning model for the detection of the mandibular canal on dental panoramic radiographs. Materials and Methods: A total of 2,100 panoramic radiographs (PANs) were collected from 3 different machines: RAYSCAN Alpha (n=700, PAN A), OP-100 (n=700, PAN B), and CS8100 (n=700, PAN C). Initially, an oral and maxillofacial radiologist coarsely annotated the mandibular canals. For deep learning analysis, convolutional neural networks (CNNs) utilizing U-Net architecture were employed for automated canal segmentation. Seven independent networks were trained using training sets representing all possible combinations of the 3 groups. These networks were then assessed using a hold-out test dataset. Results: Among the 7 networks evaluated, the network trained with all 3 available groups achieved an average precision of 90.6%, a recall of 87.4%, and a Dice similarity coefficient (DSC) of 88.9%. The 3 networks trained using each of the 3 possible 2-group combinations also demonstrated reliable performance for mandibular canal segmentation, as follows: 1) PAN A and B exhibited a mean DSC of 87.9%, 2) PAN A and C displayed a mean DSC of 87.8%, and 3) PAN B and C demonstrated a mean DSC of 88.4%. Conclusion: This multi-device study indicated that the examined CNN-based deep learning approach can achieve excellent canal segmentation performance, with a DSC exceeding 88%. Furthermore, the study highlighted the importance of considering the characteristics of panoramic radiographs when developing a robust deep-learning network, rather than depending solely on the size of the dataset.

• Journal of Biomedical Engineering Research
• /
• v.37 no.1
• /
• pp.39-45
• /
• 2016

A pressure measurement system was developed to verify magnitude and position of transferred pressure on the body surface during the intermittent pneumatic compression (IPC) which is one of the most well-known methods for the prevention of deep vein thrombosis (DVT). Eighty force sensing resistors (FSR) were arranged on a mannequin leg and a hardware controller sensed, digitized, and transferred pressure data every second while IPC was being applied. Finally, sensed pressure data were color coded and visualized on the 3D model with lab-developed software. The pressure data were also saved to files for further analysis. Using this measurement system, the changing pattern of pressure was measured on the mannequin leg by changing both chamber pressure and cuff tightness. As a result, net pressure transferred onto the body surface is dependent on chamber pressure and cuff tightness. Under the same chamber pressure, the tighter a cuff was worn, the wider compressed area was and the shorter compression cycle was. Also transferred pressure was proportional to both chamber pressure and cuff tightness.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.2
• /
• pp.179-189
• /
• 2003

Gate poly-silicon critical dimension is a prime characteristic of a metal-oxide-semiconductor field effect transistor. It is important to achieve the uniformity of gate poly-silicon critical dimension in order that a semiconductor device has acceptable electrical test characteristics as well as a semiconductor wafer fabrication process has a competitive net-die-per-wafer yield. However, on gate poly-silicon critical dimension, the complexity associated with a semiconductor wafer fabrication process entails hierarchical variance components according to run-to-run, wafer-to-wafer and even die-to-die production unit changes. Specifically, estimates of the hierarchical variance components are required not only for disclosing dominant sources of the variation but also for testing the wafer-level uniformity. In this paper, two experimental designs, a two-stage nested design and a randomized complete block design are considered in order to estimate the hierarchical variance components. Since gate poly-silicon critical dimensions are collected from fixed die positions within wafers, a factor representing die positions can be regarded as fixed in linear statistical models for the designs. In this context, the two-stage nested design also checks the wafer-level uniformity taking all sampled runs into account. In more detail, using variance estimates derived from randomized complete block designs, Duncan's multiple range test examines the wafer-level uniformity for each run. Consequently, a framework presented in this study could provide guidelines to practitioners on estimating the hierarchical variance components and testing the wafer-level uniformity in parallel for any characteristics concerned in semiconductor wafer fabrication processes. Statistical analysis is illustrated for an experimental dataset from a real pilot semiconductor wafer fabrication process.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.4
• /
• pp.216-231
• /
• 2001

Several methods for improving device yields and characteristics have been studied by IC manufacturers, as the options for programming components become diversified through the introduction of novel processes. Especially, the sequential repair steps on wafer level and package level are essentially required in DRAMs to improve the yield. Several repair methods for DRAMs are reviewed in this paper. They include the optical methods (laser-fuse, laser-antifuse) and the electrical methods (electrical-fuse, ONO-antifuse). Theses methods can also be categorized into the wafer-level(on wafer) and the package-level(post-package) repair methods. Although the wafer-level laser-fuse repair method is the most widely used up to now, the package-level antifuse repair method is becoming an essential auxiliary technique for its advantage in terms of cost and design efficiency. The advantages of the package-level antifuse method are discussed in this paper with the measured data of manufactured devices. With devices based on several processes, it was verified that the antifuse repair method can improve the net yield by more than 2%~3%. Finally, as an illustration of the usefulness of the package-level antifuse repair method, the repair method was applied to the replica delay circuit of DLL to get the decrease of clock skew from 55ps to 9ps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2221-2229
• /
• 2006

Optimal path search algorithm which is a killer application of mobile device to utilize location information should consider traffic flows of the roads as well as the distance between a departure and destination. The existing path search algorithms, however, are net able to cope efficiently with the change of the traffic flows. In this paper, we propose a new optimal path search algorithm. The algorithm takes the current flows into consideration in order to reduce the cost to get destination. It decomposes the road network into Fixed Grid to get variable heuristics. We also carry out the experiments with Dijkstra and Ar algorithm in terms of the execution time, the number of node accesses and the accuracy of path. The results obtained from the experimental tests show the proposed algorithm outperforms the others. The algorithm is highly expected to be useful in a advanced telematics systems.