• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.279-281
• /
• 1996

This paper deals with the two stage surge protection device by using varistor and LC low pass filter. Recently varistor alone has been used with overvoltage protection devices for the AC power mains and has same problems associated with high remnant voltage and noise. In this work, in order to improve the cutoff performance of surge protection device, the lightning surge protection device having two stage hybrid circuit for an AC single phase mains was designed and fabricated. Operation characteristics and surge clamping performance of the surge protection device in an $8/20{\mu}s$ surge current are investigated. As a consequence, it is found that the proposed two stage surge protective device for AC power mains has a variety of advantages such as a smaller clamping voltage, high frequency noise reduction and large clamping capacity.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1166-1170
• /
• 2011

For developing the ignition device for the interceptor of Korean active protection system, the design parameters of the ignition device which should have a short ignition delay time and sufficient energy for propellant ignition were studied. The electric primer instead of mechanical primer was adopted for deceasing delay time, and ignition code was used for decreasing the time difference of flame propagation from the flame holes. The developed ignition device showed the ignition delay time of a few ms. When the designed ignition device was applied to the open-type propulsion devices, the stable interior ballistic characteristic was showed in a firing test.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.391-394
• /
• 2008

Durability of product is an important technical parameter of a current interception device (CID) filter. This parameter is influenced by several factors, such as: environment condition, external force, shape of device, heat and so on. In this study, the effect of the geometry of the device on durability was carried out. The effect of shape on durability of device is presented by force-carrying capacity that a device can sustain a maximum external force. Studied parameters of the CID filter's geometry include clearance, thickness, and corner radius. Fracture criterion of Cockcroft and Latham was also used to predict the maximum force-carrying capacity of device.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.197-203
• /
• 2005

This paper presents kinematic calibration of parallel manipulators with partial pose measurements using a device that measures a rotation of the end-effector along with its position. The device contains an LVDT, a biaxial inclinometer, and a rotary sensor and facilitates automation of the measurement procedure. The device is designed in a modular fashion and links of different lengths can be used. The additional kinematic parameters required for the measurement device are discussed, kinematic relations are derived, and cost function is established to perform calibration with the proposed device. The study is performed for a six degree-of-freedom(DOF) fully parallel HexaSlide Mechanism(HSM). Experimental results show significant improvement in the accuracy of the HSM.

• Bulletin of the Korean Chemical Society
• /
• 제19권3호
• /
• pp.332-335
• /
• 1998

An alternating copolymer of PPV and PTV, poly[2-methoxy-5-(3,7-dimethyl)octyloxy-1,4-phenylenevinylene-alt-2,5-thienylenevinylene] (DAPPV-PTV) has been synthesized and light-emitting properties of the polymer have been studied. A single layer EL device using DAPPV-PTV as an emitting layer between ITO and Al electrodes (ITO/DAPPV-PTV/Al) has been fabricated, and light emission of the device becomes visible at 3 V. The EL emission maximum of the device is about 620 nm. Double layer EL device using DAPPV-PTV and Alq3 (ITO/DAPPV-PTV/Alq3/Al) has also been fabricated. The double layer EL device shows two-color emission depending on the applied voltage. The device emits a pale green color from 8 V, and then the color turns to red at about 18 V.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권3호
• /
• pp.40-48
• /
• 2013

Cryoablation device is a surgical instrument to produce the cooling effect to destroy detrimental biological tissue by utilizing low temperature around 110 K. Usually, this device has the concentrated cooling region, so that it is suitable for concentrated and thick target. Accordingly, it is hard to apply this device for the target which is distributed and thin target. In this study, the design procedure of a closed-loop cryoablation device with multiple J-T expansion part is developed for the treatment of incompetent of great saphenous vein. The developed cyoablation device is designed with the analysis of 1-dimensional (1-D) bio-heat equation. The energy balance is considered to determine the minimum mass flow rate of refrigerant for consecutive flow boiling to develop the uniform cooling temperature. Azeotropic mixed refrigerant R410A and zeotropic mixed refrigerant (MR) of R22 ($CHClF_2$) and R23 ($CHF_3$) are utilized as operating fluids of the developed cryoablation device to form the sufficient temperature and to verify the quality of the inside of cryoablation probe. The experimental results of R410A and the zeotropic MR show the temperature non-uniformity over the range are $244.8K{\pm}2.7K$ and $239.8K{\pm}4.7K$ respectively. The experimental results demonstrate that the probe experiences the consecutive flow boiling over the target range of 200 mm.

• 한국통신학회논문지
• /
• 제39C권8호
• /
• pp.681-687
• /
• 2014

최근 몇 년 간 스마트 폰과 같은 개인 스마트 디바이스들의 확산으로 인해 인터넷 트래픽이 급증하고 있다. 이는 지상에 있는 기지국뿐만 아니라 건물, 버스, 철도, 선박 등에 설치된 AP(Access Point)나 기지국에도 심각한 과부하를 야기한다. 따라서 이를 해소하기 위해 크루즈선과 같은 선박 내부에서 효과적인 콘텐츠 분배를 위한 통신시나리오를 제안한다. 또한 제안한 시나리오 안에서 기존의 단말 간 직접통신(D2D: Device-to-Device)을 확장하여 다중 단말 간(MD2MD: Multi-Device-to-Multi-Device) 직접 통신 네트워크를 구성하고 이에 적합한 전송기법을 제시한다. 제안한 선박 내 다중 단말 간 직접통신 방식은 STBC(Space-Time Block Coding) 전송기법, SM(Spatial Multiplexing) 전송기법, 그리고 하이브리드 STBC-SM 기법을 비교분석하여 전송률(throughput) 관점에서 향상된 성능을 보인 전송기법을 채택했다. 제안한 방식은 선박 내 통신 특히 사용자의 수가 많아 트래픽이 심하여 선박 내 설치된 AP의 과부하가 심할 경우 이를 분배하고 사용자들에게 효율적으로 보다 질 높은 콘텐츠를 제공할 수 있는 기술로 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.95-95
• /
• 2014

An OLED(Organic Light-Emitting Diode) device based on the emissive electroluminescent layer a film of organic materials. OLED is used for many electronic devices such as TV, mobile phones, handheld games consoles. ULVAC's mass production systems are indispensable to the manufacturing of OLED device. ULVAC is a manufacturer and worldwide supplier of equipment and vacuum systems for the OLED, LCD, Semiconductor, Electronics, Optical device and related high technology industries. The SMD Series are single-substrate sputtering systems for deposition of films such as metal films and TCO (Transparent Conductive Oxide) films. ULVAC has delivered a large number of these systems not only Organic Evaporating systems but also LTPS CVD systems. The most important technology of thin-film encapsulation (TFE) is preventing moisture($H_2O$) and oxygen permeation into flexible OLED devices. As a polymer substrate does not offer the same barrier performance as glass substrate, the TFE should be developed on both the bottom and top side of the device layers for sufficient lifetimes. This report provides a review of promising thin-film barrier technologies as well as the WVTR(Water Vapor Transmission Rate) properties. Multilayer thin-film deposition technology of organic and inorganic layer is very effective method for increasing barrier performance of OLED device. Gases and water in the organic evaporating system is having a strong influence as impurities to OLED device. CRYO pump is one of the very useful vacuum components to reduce above impurities. There for CRYO pump is faster than conventional TMP exhaust velocity of gases and water. So, we suggest new method to make a good vacuum condition which is CRYO Trap addition on OLED evaporator. Alignment accuracy is one of the key technologies to perform high resolution OLED device. In order to reduce vibration characteristic of CRYO pump, ULVAC has developed low vibration CRYO pumps to achieve high resolution alignment performance between Metal mask and substrate. This report also includes ULVAC's approach for these issues.

• 한국통신학회논문지
• /
• 제40권10호
• /
• pp.1986-1993
• /
• 2015

본 논문에서는 다중 셀 셀룰러 네트워크에서 단말 간 직접 통신(Device-to-Device: D2D)의 성능을 최대화하기 위한 최적 자원 및 전력 할당 알고리즘을 제안한다. 셀룰러 단말과 D2D 단말이 통신 자원을 공유하는 상황에서 필연적으로 D2D 단말은 자신이 속한 셀뿐만 아니라 인접한 셀의 D2D 단말과 셀룰러 단말로부터 간섭을 받게 된다. 이러한 환경에서 셀 내의 간섭과 인접 셀의 간섭을 고려한 인집 기지국간의 협력적 D2D 자원 할당 방법을 제안한다. 또한 자원 할당이 이루어진 후 D2D 단말의 최적 전력 할당 문제를 제시하고 최적해를 찾는 알고리즘을 제시한다. 제안하는 D2D 자원 및 전력 할당 알고리즘은 셀룰러 단말의 성능을 보장하기 위해 D2D 단말의 송신전력 제약 조건을 갖는 상황에서 셀룰러 단말로부터의 간섭과 인접 셀 D2D 단말로부터의 간섭을 고려하여 D2D 단말이 얻을 수 있는 전송률을 최대화시킬 수 있다. 다중 셀 환경에서의 모의실험을 통하여 제안한 자원 및 전력 할당 알고리즘의 성능을 검증하고 기존의 비협력적 자원 할당 방식과 비교하여 제안한 협력적 자원 할당 방식의 성능 이득을 확인한다.

• Medical Lasers
• /
• 제9권2호
• /
• pp.150-158
• /
• 2020

Background and Objectives Low-level laser therapy (LLLT) is used widely to promote hair growth in androgenetic alopecia (AGA). This study examined the clinical efficacy and safety of a home-use LLLT device with a newly designed array of light sources and software optimized for individual types of AGA. Materials and Methods The study was a randomized, double-blind, sham device-controlled trial. Forty-eight subjects (39 men and nine women) were assigned randomly in a 2:1 ratio to use either the test device (LG Pra'L HGN1, LG electronics, Korea) or sham device. The subjects used the LLLT device three times a week for 16 weeks. Phototrichogram was used to measure the hair density and hair thickness at 0, 8, and 16-weeks. Adverse events were closely monitored. Results After 16 weeks of using the device, the test group showed a significant increase in hair density and hair thickness compared to the control. In the test group, the hair density increased 6.96 counts/cm² at eight weeks and 13.67 counts/cm² at 16 weeks from the baseline. The hair thickness increased 7.21 ㎛ at eight weeks and 11.80 ㎛ at 16 weeks compared to the baseline. Conclusion The home-use LLLT device with a novel array of light sources and an individualized program according to the types of hair loss appears to be an effective and safe treatment modality for both male and female AGA patients.