• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.7
• /
• pp.576-582
• /
• 2002

Nonvolatile semiconductor memory devices with reoxidized nitrided oxide(RONO) gate dielectrics were fabricated, and nitrogen distribution and bonding species which contribute to memory characteristics were analyzed. Also, memory characteristics of devices depending on the anneal temperatures were investigated. The devices were fabricated by retrograde twin well CMOS processes with $0.35\mu m$ design rule. The processes could be simple by in-situ process in growing dielectric. The nitrogen distribution and bonding states of gate dielectrics were investigated by Dynamic Secondary Ion Mass Spectrometry(D-SIMS), Time-of-Flight Secondary Ion Mass Spectrometry(ToF-SIMS), and X-ray Photoelectron Spectroscopy(XPS). As the nitridation temperature increased, nitrogen concentration increased linearly, and more time was required to form the same reoxidized layer thickness. ToF-SIMS results showed that SiON species were detected at the initial oxide interface which had formed after NO annealing and $Si_2NO$ species within the reoxidized layer formed after reoxidation. As the anneal temperatures increased, the device showed worse retention and degradation properties. It could be said that nitrogen concentration near initial interface is limited to a certain quantity, so the excess nitrogen is redistributed within reoxidized layer and contribute to electron trap generation.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.7
• /
• pp.603-609
• /
• 2015

Railway vehicles driven by wheels obtain force required for propulsion and braking by adhesive force between wheels and rails, this adhesive force is determined by multiplying adhesion coefficient of the friction surface by the applied axle load. Because the adhesion coefficient has a peak at certain slip velocity, it is important to determine the maximum values of the friction coefficient on the contact area. But this adhesive phenomenon is not clearly examined or analyzed. Thus we have developed new test procedure using the scaled adhesion test-bench for analyzing of the adhesion coefficient between wheel and rail. This adhesion test equipment is an experimental device that contacts mutually with twin disc which are equivalent to wheels and rails of railway vehicles.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.17-20
• /
• 2001

Nonvolatile semiconductor memory devices with reoxidized nitrided oxide(RONO) gate dielectric were fabricated, and nitrogen distribution and bonding species which contributing memory characteristics were analyzed. Also, memory characteristics of devices according to anneal temperatures were investigated. The devices were fabricated by 0.35$\mu\textrm{m}$ retrograde twin well CMOS processes. The processes could be simple by in-situ process of nitridation anneal and reoxidation. The nitrogen distribution and bonding state of gate dielectric were investigated by Dynamic Secondary Ion Mass Spectrometry(D-SIMS), Time-of-Flight Secondary ton Mass Spectrometry(ToF-SIMS), and X-ray Photoelectron Spectroscopy(XPS). Nitrogen concentrations are proportional to nitridation anneal temperatures and the more time was required to form the same reoxidized layer thickness. ToF-SIMS results show that SiON species are detected at the initial oxide interface and Si$_2$NO species near the new Si-SiO$_2$ interface that formed after reoxidation. As the anneal temperatures increased, the device showed worse retention and degradation properties. These could be said that nitrogen concentration near initial interface is limited to a certain quantity, so excess nitrogen are redistributed near the Si-SiO$_2$ interface and contributed to electron trap generation.

• Knowledge Management Research
• /
• v.23 no.2
• /
• pp.123-142
• /
• 2022

The non-face-to-face environment accelerated by COVID-19 has speeded up the dissemination of digital virtual ecosystems and metaverse. In order for the metaverse to be sustainable, digital twins that are compatible with the real world are key, and critical technology for that is AR (Augmented Reality). In this study, we examined research trends about AR, and will propose the directions for future AR research. We conducted LDA based topic modeling on 11,049 abstracts of published domestic and foreign AR related papers from 2009 to Mar 2022, and then looked into AR that was comprehensive research trends, comparison of domestic and foreign research trends, and research trends before and after the popularity of metaverse concepts. As a result, the topics of AR related research were deduced from 11 topics such as device, network communication, surgery, digital twin, education, serious game, camera/vision, color application, therapy, location accuracy, and interface design. After popularity of metaverse, 6 topics were deduced such as camera/vision, training, digital twin, surgical/surgical, interaction performance, and network communication. We will expect, through this study, to encourage active research on metaverse AR with convergent characteristics in multidisciplinary fields and contribute to giving useful implications to practitioners.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.54-60
• /
• 2008

The atomization characteristics of the dual air supplying twin-fluid nozzle were investigated experimentally using PIV and PDA systems. The two-fluid nozzle is composed of three main parts: the feeding injector to supply fluid that is controlled by a PWM (pulse-width modulation) mode, the adaptor as a device with the ports for supplying the carrier and assist air and the main nozzle to produce the spray. The main nozzle has the swirl tip with four equally spaced tangential slots, which give the injecting fluid an angular momentum. The angle of the swirl tip varied with 0$^{\circ}$ 30$^{\circ}$, 60$^{\circ}$ and 90$^{\circ}$, and the ratios of carrier air to assist air and ALR(total air to liquid) were 0.55 and 1.23, respectively. The macroscopic behavior of the spray was investigated using PIV system, and the mean velocity, turbulent intensity and SMD distributions of the sprays were measured using PDA system. As the results, the mean axial velocity at the spray centerline decrease with the increase of the swirl angle. The turbulent intensities of the axial and radial velocity were increased with the increase of the swirl angle. The mean SMD (Sauter mean diameter) of the radial direction along the axial distance shows the lowest value at the swirl angle of 60$^{\circ}$.

• Korean Institute of Interior Design Journal
• /
• v.19 no.3
• /
• pp.242-250
• /
• 2010

Recently, the long-term care insurance for the elderly was carried out according to the elderly is increased rapidly and the formation of sympathy that a nation and society try commonly to share health and welfare promotion of the elderly. The purpose of this study is to analyze the present status of nursing home after that the long-term care insurance is enforced in chungcheongbuk-do and to utilize as basic data. The study limited its survey to those facilities that refer to the Ministry of Health and Welfare data, that had the capacity of more than 50 people. The result are as followings. Firstly, most of the nursing home were located on the outskirts of the city. But it must be constructed in the city center if the recent deinstitutionalization trend is reflected. Secondly, notwithstanding the provisions of the Elderly Welfare Law, if the Livability and amenity are considered, the plan of a single or a twin room is needed. The ondol(溫突) system bedroom for the safety of the elderly had to be planned and for the color planning of a bedroom, a heating, the furniture, the form of a door, corridors, etc. should be partly improved. The fastener in which it is appropriate for the main exit, a stair, an elevator, the lighting device, and etc. is needed and the installation of a wandering path for the dementia patient and etc. is required. Thirdly, most of the dining room arranged on the first floor but it is not nearly used and it used for employee or the other use. Therefore, we have to consider the system in which it can deliver the meal to a bedroom. If the smell of the elderly and etc. is considered, the sufficient height of the floor should be reflected for the ventilation equipment. Lastly, The improvement of the existing law are required.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.3
• /
• pp.293-300
• /
• 2009

The rotorcraft-based unmanned aerial vehicle(UAV) capable of performing close-range surveillance and reconnaissance has been developed. Trade studies on mission feasibility led to the adoption of a coaxial rotorcraft with twin rotors counter-rotating in one axis and driven by electric motors. A commercial off-the-shelf flight control computer(FCC) and a radio frequency modem were adopted for autonomous navigation. In order to achieve an aerial view, commercial charge-coupled device camera was also integrated into the vehicle. The performance of the completed vehicle was proved with manual flight test, and mission capability was verified through waypoint navigation flight after being equipped with FCC. This paper treats the whole process of design and system integration for development of the coaxial rotorcraft UAV.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1294-1299
• /
• 2020

Recently, interest in safety education based on VR has been increasing, but it started rising doubts are growing over its effectiveness. Therefore, the purpose of this thesis project is to research the current status of safety education contents based on VR and present situations and future prospects for safety education based on VR. As a result of researching about safety education contents using VR, the movement or condition of characters in the contents in the VR environment was very unnatural. Especially, in simulations such as driving a VR device, the controller was skeptical about its efficiency because the operation was different from the actual environment. As a result, we would like to make suggestions and forecasts as follows: First, the production of real and twin environment in VR should be realized. Second, the natural movement of the character should be performed. Third, various controllers should be released in VR devices. Fourth, a realistic scenario should be developed.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.5
• /
• pp.93-100
• /
• 2022

Korea's ancestral culture has limited travel and contact due to Corona (COVID-19). In addition, Korean ancestral culture meets in person to commemorate the deceased. In this paper, we propose a non-face-to-face metaverse memorial platform service that can commemorate the deceased and perform ancestral rites in the cyber world (virtual reality) by applying the metaverse technology. The services proposed in the study consisted of a remembrance hall that displays the life story of the deceased, a ancestral hall that conducts ancestral rites for the deceased, and a deceased pavilion that checks the remains and wills of the deceased. In addition, the virtual reality device (HMD: Head Mounted Display) set the teleportation and content resolution to 4K to minimize dizziness. In particular, the priests applied interaction technology to provide an immersive service for ancestral rites between family members. The researched memorial hall metaverse service is a metaverse-based platform service that allows anyone to commemorate the deceased as a family unit in a non-face-to-face state rather than face-to-face.

• Smart Media Journal
• /
• v.11 no.9
• /
• pp.56-63
• /
• 2022

Recently, the frequency and range of algae occurrence in major rivers and lakes are increasing due to the increase in water temperature due to climate change, the inflow of excessive nutrients, and changes in the river environment. Abnormal algae include green algae and red algae. Green algae is a phenomenon in which blue-green algae such as chlorophyll (Chl-a) in the water grow excessively and the color of the water changes to dark green. In this study, a 3D virtual world of digital twin was built to monitor and control water quality information measured in ecological rivers and lakes in the living environment in real time from a remote location, and a sensor measuring device for water quality information based on the Internet of Things (IOT) sensor. We propose to build a smart water environment service platform that can provide algae warning and water quality forecasting by predicting the causes and spread patterns of water pollution such as algae based on AI machine learning-based collected data analysis.