• 제목/요약/키워드: Device ID

검색결과 155건 처리시간 0.028초

도난방지 및 구조신호 전송기능이 있는 저가형 농용트랙터 블랙박스 개발 (Development of an Inexpensive Black Box with Transmission of SOS and Theft Signal for an Agricultural Tractor)

  • 김유용;신승엽;김병갑;김형권;김진오;조용호
    • Journal of Biosystems Engineering
    • /
    • 제37권6호
    • /
    • pp.352-358
    • /
    • 2012
  • Purpose: The inexpensive black box system was developed to acquire and save driving information, to give the slope information, and to transmit SOS and theft signal. Method: The device consists of a main micro controller to acquire and save data, a GPS sensor module, a CDMA module, a touch LCD module, a RF (Radio Frequency) ID module, a SD (Secure Digital) card module, an emergency electric power source, a theftproof circuit, and a sensing device. The sensing device consists of a 8 bit micro controller, a accelerometer to detect impulse, two slope sensors to detect roll and pitch angle and a circuit to detect operation of 6 lighting devices. Results: Test results are as follows: 1) a tractor can be start up only with an electronic key (password or RFID card), 2) theft signal was transmitted when a tractor moved without an electronic key, 3) SOS was transmitted at conditions that rollover or crash happened. 4) 5 more than per 1s data are recorded at 5 minute intervals as new file name in SD card. Conclusions: This system can be used to save travelling record, reduce accident, prevent theft and rescue life in the accidents.

자동인식 및 데이터 수집을 이용한 사용자 인증 시스템 (User Authentication System based on Auto Identification and Data Collection)

  • 정필성;조양현
    • 한국정보통신학회논문지
    • /
    • 제22권1호
    • /
    • pp.75-82
    • /
    • 2018
  • 모바일 기기 사용자가 증가함에 따라서 다양한 사용자 인증 방식에 대한 연구가 활발하게 진행되고 있다. 사용자 인증방식에는 사용자 아이디와 비밀번호를 이용하는 지식기반 인증방식, 사용자만이 가지고 있는 특성인 생체기반, 위치기반 등을 이용하는 방법과 OTP(On Time Password)와 같은 2차 인증을 진행하는 인증방식이 사용되고 있다. 본 논문에서는 기존 인증방식의 문제점을 개선하고 사용자가 원하는 방식으로 암호화가 진행될 수 있는 사용자 시스템을 제안한다. 제안한 인증 시스템은 모바일 기기를 이용하여 인증요소를 수집하는 인증요소 수집 모듈, 수집한 인증요소를 조합하여 보안키를 생성하는 보안키 생성 모듈, 생성된 보안키를 이용하여 인증을 진행하는 암호화 및 복호화 모듈로 구성된다.

Isoindigo Based Small Molecules for High-Performance Solution-Processed Organic Photovoltaic Devices

  • Elsawy, W.;Lee, C.L.;Cho, S.;Oh, S.H.;Moon, S.H.;Elbarbary, A.;Lee, Jae-Suk
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.245.2-245.2
    • /
    • 2013
  • Solution processed organic photovoltaic devices have relatively less attention compared to polymer photovoltaic devices even though they have high possibility to be developed because they have both advantages of polymer and organic, such as solution processable, no synthetic batch dependence of photovoltaic performance, high purity and high charge carrier mobility as well as relatively high efficiency (~7%). In addition, solution processed organic photovoltaic devices have an advantage of easiness to study the relationship between the molecular structure and photovoltaic performance due to its simple structure. In this work, five isoindigo based low band gap donor-acceptor-donor (D-A-D) small molecules with different electron donating strength were synthesized for investigating the relationship between the molecular structure and photovoltaic performance, especially, investigating the effects of different electron donating effect of donor group in isoindigo backbone to photovoltaic device performance. The variation of electron donating strength of donor group strongly affected the optical, thermal, electrochemical and photovoltaic device performances of isoindigo organic materials. The highest power conversion efficiency of ~3.2% was realized in bulk heterojuction photovoltaic device consisted of the ID3T as donor and PC70BM as acceptor. This work demonstrates the great potential of isoindigo moieties as electron deficient units as well as guideline for synthesis of donor-acceptor-donor (D-A-D) small molecules for realizing highly efficient solution processed organic photovoltaic devices.

  • PDF

MFSFET 소자의 전기적 및 리텐션 특성 (Electrical and Retention Properties of MFSFET Device)

  • 정윤근;강성준;정양희
    • 한국정보통신학회논문지
    • /
    • 제11권3호
    • /
    • pp.570-576
    • /
    • 2007
  • 본 연구에서는 field-dependent polarization 모델과 square-law FET 모델을 이용하여 Metal- ferroelectic-semiconductor FET (MFSFET) 소자의 특성을 연구하였다. 게이트 전압에 따른 드레인 전류특성에서 강유전체 박막의 항전압이 0.5 와 1 V 일 때, 각각 1와 2 V의 메모리 창 (memory window) 을 나타내었다. 드레인 전류-드레인 전압곡선에서 두 부분의 문턱전압에 의해 나타난 포화 드레인 전류차이는 게이트 전압이 0, 0.1, 0.2, 0.3 V 일 때, 각각 1.5, 2.7, 4.0, 5.7 mA로 명확한 차이를 나타내었다. PLZT(10/30/70), PLT(10), PZT(30/70) 박막의 이력곡선 시뮬레이션과 리텐션 특성의 fitting 결과를 바탕으로 시간경과 후의 드레인 전류를 분석한 결과, PLZT(10/30/70) 박막이 10년 후에도 약 18%의 포화 전류가 감소하는 가장 우수한 신뢰성을 나타내었다.

건축자재용 RFID 패키징 설계 (Design of RFID Packaging for Construction Materials)

  • 신재희;황석승
    • 한국전자통신학회논문지
    • /
    • 제8권6호
    • /
    • pp.923-931
    • /
    • 2013
  • RFID(Radio Frequency Identification)는 버스카드, 출입문 카드, 물류유통, 건축자재 관리 등 일상생활에서 다양하게 사용되는 태그의 일종으로 ID정보를 무선 주파수(RF, Radio Frequency)를 사용하여 인식하는 무선인식장치이다. RFID는 투과성과 인식률, 메모리 크기, 다중태그 인식률, 외부 오염 먼지, 외부 충격 등에 따라 크기와 성능이 달라지고, 이와 같은 요소들을 고려한 RFID 보호를 위한 패키징이 필요하다. 현재 RFID는 건축자재의 효과적인 관리를 위해서도 다양하게 사용되고 있는데, 건축자재에 RFID를 부착하기 위해서는 외부로 부터의 충격에 강건한 건축자재용 RFID 패키징 제작이 요구되고 있다. 본 논문에서는 외부 충격에 강하고, 고장 시 RFID의 교체가 가능하도록 패키징 틀과 본체를 분리하여 설계된 건축자재용 RFID 패키징을 제안한다. 제안된 RFID 패키징을 위한 상세한 설계도를 제시하였으며, 3D 프린터를 사용하여 설계된 패키징을 직접 제작하여 성능 평가를 실시하였다.

블루투스 무선기술을 응용한 원격제어 시스템의 설계 (The Design of Remote Control System using Bluetooth Wireless Technology)

  • 전형준;이창희
    • 한국컴퓨터산업학회논문지
    • /
    • 제4권4호
    • /
    • pp.547-552
    • /
    • 2003
  • 본 논문에서는 블루투스 기기간 전송되는 데이터에 대한 보안성을 향상시키기 위하여 인증과정에서의 PIN 코드를 특정 피코넷을 구성하는 블루투스 기기틀에 동일하게 부여하였다. 블루투스 피코넷의 구현을 위하여 블루투tm 기기들에 고유의 ID를 부여하고 기기간 데이터 포맷을 달리한 통신 알고리즘을 설계하였고, uCOS-II RTOS 기반의 ARM프로세서를 사용한 임베디드 하드웨어 모듈을 구현하였다. 여기서는 block 인수글 갖는 함수들을 nonblocking 화하고 커널을 간소화함으로써 CPU 의 효율을 약 30 % 정도 향상시켜 전체 피코넷의 효율을 증대시킴으고써 access point로 사용이 가능하도록 하였으며, 채널 상태에 따라 효과적으로 패킷을 선택함으고써 최대 10 frames의 영상신호 전송 및 음성신호 전송을 가능하게 하였다. 상기의 과정을 통하여 블루투스 피코넷을 제어하기 위한 운영 프로그램을 설계하여 영상 및 음성 그리고 데이터의 처리가 수행됨을 보였고, 이로써 블루투스 기술을 이용한 원격제어 시스템의 상용화 가능성을 제시하였다.

  • PDF

GOOSE 프로토콜 환경에서 Snort 기반의 침입 탐지 시스템 개발 (Development of Intrusion Detection System for GOOSE Protocol Based on the Snort)

  • 김형동;김기현;하재철
    • 정보보호학회논문지
    • /
    • 제23권6호
    • /
    • pp.1181-1190
    • /
    • 2013
  • 디지털 변전 자동화 시스템의 국제 표준인 IEC 61850에서는 IED(Intelligent Electronic Device)간의 상호 통신을 위해 GOOSE(Generic Object Oriented Substation Event) 프로토콜을 사용하고 있다. 그러나 GOOSE 프로토콜은 TCP/IP 프로토콜과 유사하게 이더넷에 기반하여 운용되므로 다양한 형태의 보안 위협에 노출되어 있다. 따라서 본 논문에서는 소프트웨어 기반의 공개 침입 탐지 시스템(Intrusion Detection System)으로 사용되는 Snort를 이용하여 GOOSE 프로토콜에 대한 IDS를 개발하였다. 개발된 IDS에는 디코딩 과정과 전처리 과정을 통해 GOOSE 패킷에 대한 키워드 탐색 기능과 DoS 공격 탐지 기능이 구현되어 있다. 또한, GOOSE 네트워크 실험 환경을 구축하고 GOOSE 패킷 생성 및 송 수신 실험으로 통해 IDS 시스템이 정상적으로 동작함을 확인하였다.

직류 전원선을 이용한 다중 접속 양방향 직렬통신 프로토콜 구현 (Implementation of multiple access bidirectional serial communications protocol using DC power line)

  • 한경호;김원일;황하윤
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 춘계학술대회 논문집
    • /
    • pp.332-338
    • /
    • 2008
  • This paper handles, implementation of multiple access bidirectional serial communications protocol using two common DC power lines, whict are power supply and ground, connecting multiple devices. Communication between the host and the multiple clients are performed using unique packet data with device ID unique to each devices connected on the common power lines. Host initiates data communications by transmitting command packet to the designated client with the client's ID and the client responds by transmitting response packet to the host and in this way, multiple clients and host exchange the packet through the common power lines. The normal voltage of the power communication line maintains 24V corresponding to level 1 and the host drops the voltage to 12V on sending level 0 signal, also the clients normally keeps the line voltage to 24V use pull-down circuit to drop the voltage to 12V on sending level 1 signal. Power supply originates from the host, the host senses the voltage level of the power communication lines and when the clients activates pull down circuit to send level 0 signal and the voltage drops to 12V, the hosts switches power source from 24V to 12V. Also, when clients deactivate pull down circuit to send level 1 signal, the host senses the voltage increase and switches the power source from 12V to 24V. Experimental circuit is designed with one hosts and four clients and verified the power line voltage switching operation depending on the data signal levels on the power line. The proposed research result can be applied to two wire power communications system with one host and multiple low current consumption clients.

  • PDF

바이오 응용을 위한 지능형 실리콘 비드 칩 설계 (Intelligent silicon bead chip design for bio-application)

  • 문형근;정인영
    • 한국정보통신학회논문지
    • /
    • 제16권5호
    • /
    • pp.999-1008
    • /
    • 2012
  • ISB(Intelligent Silicon Bead)는 기존 CMOS 칩과 달리 CMOS SoC의 전원을 포함한 외부와의 인터페이스(interface)를 모두 빛을 이용하여 칩의 초소형화 및 단가를 낮추고 광통신, 메모리 기능을 탑재한 신개념 바이오 실험용 칩이다. 본 논문에서는 외부리더기로부터 비드칩에 인가된 하나의 광신호를 통해 전력과 신호를 동시에 전달하기 위한 저전력, 저면적특성의 광수신단 설계와 입력프로토콜에 대해서 소개하고 이를 시뮬레이션 및 측정을 통해 검증한다. 또한 칩의 ID를 기록/저장하기 위한 저전력 PROM을 설계하여 광신호 입력에 따른 출력 결과 값을 얻는데 성공한다. 본 연구를 통하여 기존 RFID에서 발생한 칩면적 소형화의 한계와 높은 단가 등의 문제점을 해결하여 새로운 유형의 바이오용 칩 개발을 기대할 수 있다.

ECG와 비콘 기반의 블록체인을 이용한 신원 인증 및 이상징후 탐지 기법 (A Scheme of Identity Authentication and Anomaly Detection using ECG and Beacon-based Blockchain)

  • 김경희;이근호
    • 사물인터넷융복합논문지
    • /
    • 제7권3호
    • /
    • pp.69-74
    • /
    • 2021
  • 최근 생체 인증 기술이 발전함에 따라 생체 인증을 이용한 사용자 인증 기법들이 많아지고 있다. 기존에 존재하는 ID/PW 등 다양한 인증 기법에는 다양한 문제점이 제시되고 있다. 따라서 최근에는 2차 인증을 도입하여 보안성을 높이는 방식을 채택하여 사용하고 있다. 본 논문에서는 근거리 무선 장치(Beacon)와 다양한 생체 인증방식 중 심장의 전기적 생체신호를 이용하여 위·변조가 매우 어려운 특징을 가진 ECG를 이용하여 사용자의 신원 인증과 이상징후를 탐지할 수 있는 사용자 인증 시스템을 제안하고자 한다. 이 시스템은 손목에 장착 가능한 웨어러블 디바이스 형태의 ECG 측정 도구를 통해 기록한 ECG 데이터와 데이터베이스에 블록체인 형태로 저장된 신원 정보 및 생체데이터를 비교하여 일차적으로 신원을 확인하고 비콘(Beacon)을 활용하여 사용자의 위치를 파악함으로써 사용자의 이상징후를 탐지하고자 한다.