• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.3
• /
• pp.43-49
• /
• 2013

Recently harmonics flowing into power system is increasing as the usage of semiconductor equipments and switching mode power equipments are increasing. Harmonics cause problems such as heat increasing and reduction in capacity of transformers, especially the harmonics flowing into a distribution transformer can lead to the lifetime reduction of transformer. In this paper, we are about to develop a device that can monitor harmonics in real-time as it is affixed to a distribution transformer. Unlike the existing expensive harmonic analysis device, a new harmonic analysis algorithm is proposed in order to implement low-cost equipment. The real-time harmonic analysis algorithm proposed in this paper allows implementation on low performance microcontrollers, thus it can monitor the harmonic in real-time as it is individually affixed to the transformer. Therefore, it would improve the reliability of the transformer and stable power system operation would be possible as it can prevent the transformer accidents in advance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1853-1856
• /
• 2003

This paper considers the problem of longitudinal control of a platoon of automotive vehicles on a straight lane of a highway and proposes control laws in the event of loss of communication between the lead vehicle and the other vehicles in the platoon. Since safety plays a key role in the development of an Automated Highway System, fault-tolerant control is vital. In this paper, we develop a control algorithm in vehicle platooning and prove that this control algorithm is stable for certain class of faults such as parameter uncertainties. The performance of the controller is demonstrated through a series of simulations incorporating various vehicles and AHS faults. Results of simulation shows that the vehicles have good performance in spite of simple automotive and AHS failure, such as actuator failure,that is to say, engine input failure, communication failure between lead vehicle and the another vehicles.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.202-205
• /
• 2001

In this study, the electrokinetic remediation test for the kaolin contaminated by lead was performed and voltage, zeta potential, pH distribution, current, contamination transport in soil sample were studied and finite differential numerical analysis program(HERP) for a contaminated soil were compared with those of test. From the result of HERP, in the anode it was represented that the rest concentration was decreased with the voltage. Hence, if treatment time was continued for a long in the constant voltage, comparing with sample having no change in the rest concentration, it is considered that the voltage gradient is the control factor of the rest concentration.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1395-1399
• /
• 2005

Lately, the demand for automation in the industries has increased and automation system has continuously installed in various industrial fields. But automation for shipbuilding industries is more difficult than others. Because we must cope with diverse ship types and owner's various requirements. Nevertheless, for the past several years a steady development on welding robot for shipbuilding has been going on. Existing automatic welding robots are operated separately and do not communicate with each other. In the existing facilities, although a unit of robot has a good performance, and if all of units are not operated systematically, we are not satisfied with results of our system. So we suggest an integration and operation method of system units. System integration methods applied to our system have in many cases lead to lower cost and shorter lead time.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.1
• /
• pp.107-110
• /
• 2003

High Temperature Superconductor (HTS) transmission cable can carry more than 2 to 5 times higher electricity and also obtain substantially lower transmission losses than conventional cables. Liquid nitrogen is to be used to cool the HTS power cable and its cost is much cheaper than the liquid helium used for the cooling of metal superconducting wire. In Korea the HTS power cable development project has been ongoing since July, 2001 with the basic specifications of 22.9kV, 50MVA and told dielectric type as the first 3-year stage. The cryogenic system of the HTS cable is composed of HTS cable cryostat termination and refrigeration system. Termination of HTS cable is a connecting part between copper electrical cable at room temperature and HTS cable at liquid nitrogen temperature. In order to design the termination cryostat, it is required that the conduction heat leak and Joule heating on the current lead be reduced, the cryostat be insulated electrically and good vacuum insulation be maintained during long time operation. Heat loads calculations on the copper current lead have been performed by analytical and numerical method and the feasibility study fer the other candidate materials has also been executed.

• Journal of Animal Environmental Science
• /
• v.1 no.1
• /
• pp.83-102
• /
• 1995

Composting is an ecologically sound method of recycling organic waste. Its advantages include the maintenance of soil fertility and improvement of soil physicochemical property. It is an essential part of the waste minimization. That is, composting should be included to increase the recycling rate up to more than 20%. To encourage composting of waste, it is necessary to develop some effective composters of small scale facilities and densely populated areas. For medium and large-size facilities, the optimum process should be selected. Technical counselling and support is desirable for small scale composters for urban residential and rural area. On the other hand, adequate amendment of relevant legislation should be followed to encourage composting. An example of unreasonable legislation is the current fertilizer management act. According to the regulation, the maximum allowable limit of lead in the compost is less than 150ppm, which is too strict. This limit should be increased to at least 300ppm, which is the observed level in most states in USA. At the same time, sound infrastructure should be established and decent publicity work should be achieved to accelerate composting activity. In this paper the desirable standard for some heavy metal concentration in the compost were suggested.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.5
• /
• pp.391-395
• /
• 2015

A 15-Lead ECG has been developed to diagnose posterior wall diseases of the heart that a 12-Lead ECG cannot diagnose. However, 15-Lead ECG data for developing heart-diseases-detecting algorithm are limited, and previous ECG simulators cannot predict the ECG waveform according to the changes in electrode. To solve these problems, the lumped parameter model (LPM), which divides the heart into 15 sections with varying electrical capacitance and electrical resistance. To imitate the electrical conduction in the heart, each node was connected to a current source and delivered the specific current considering the positions and time delay. The purpose of this study is to acquire the waveform that can be used in an ECG by delivering the specific current to LPM.

• Journal of Powder Materials
• /
• v.15 no.4
• /
• pp.320-330
• /
• 2008

On the base of experience in development of Magnetic Powder Composites, and particularly Soft Magnetic Composites, authors are trying to systematize classification and indicate possible development prospective of Magnetic Nanocomposites (MN) technology and their applications in electrical converters. Clear classification and systematization, at an early stage of any materials and technology development, are essential and lead for better understanding and communication between researchers and industry involved. This concern MN as well and it seems to be the right time to make it at present stage of their development. Presented proposal of classification distinguishes various types of MN by their magnetic properties and area of possible applications. It is not a close set of types, and can be extended due to increase of knowledge concern these nanocomposites.

• Advances in environmental research
• /
• v.7 no.3
• /
• pp.225-237
• /
• 2018

The sorption of metal ions with low-cost adsorbents plays an important role in sustainable development. In the present study, the efficacy of sugarcane bagasse, rain tree fruits (samaneasaman), banana stem and their mixtures, used as bio-sorbents, in the removal of Cu(II) and Pb(II) ions from aqueous solution is evaluated. Batch studies are conducted, and residual ions were measured using Inductively Coupled Plasma (ICP)-atomic spectrometer. Effect of pH, initial metal ion concentration, reaction time and adsorbent dosage are studied. The Pb(II) removal efficiency was observed to be 97.88%, 98.60% and 91.74% for rain tree fruits, banana stem and a mixture of adsorbents respectively. The highest Cu(II) ion removal was observed for sugarcane bagasse sorbent with an efficiency of 82.10% with a pH of 4.5 and a reaction time of 90 min. Finally, desorption studies were carried out to study the leaching potential of adsorbent, and it was found that the adsorbent is stable in water than the other leaching agents such as HCl, ammonium acetate, Sodium EDTA. Hence, these adsorbents can be effectively used for the removal of these heavy metals.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.905-910
• /
• 2003

In this paper, we develop real-time monitoring system to detect third-party damage on natural gas pipeline by using sound propagation model. Since many third-party incidents cause damage that does not lead to immediate rupture but can grow with time, the developed real-time monitoring system can execute a significant role in reducing many third-party damage incidents. The developed system is composed of three steps as follows: i) DSP based system, ii) wireless communication system, iii) the calculation and monitoring software to detect the position of third-party damage using the propagation speed of acoustic wave. Furthermore, the developed system was set at practical offshore pipeline between two islands in Korea and it has been operating in real time.