• Journal of Ocean Engineering and Technology
• /
• v.26 no.6
• /
• pp.33-38
• /
• 2012

In our study, a closed-type penetration unit for standard penetration test (SPT) equipment was developed in order to operate in an underwater environment. This type causes energy dissipation, mainly due to the small gap between an airtight case and moving hammer. The dissipation was estimated through a CFD analysis. The computed dissipated energy was less than 1.2% compared to the potential energy of the hammer with the given gap. Subsequently, the impact energy of the underwater SPT equipment was within 1.2% of that for the SPT equipment on land.

• 대한공업교육학회지
• /
• v.39 no.1
• /
• pp.143-163
• /
• 2014

This study developed a National Competency Standard(NCS) regarding the casino operations management based on the manual for developing National Competency Standard of 13 years and a revised classification system chart of the National Competency Standard. For the research method, this study developed a national competency standard of relevant jobs after going through review, consultation, modification, supplementation, and reporting procedures 10 times with development experts of the National Competency Standard, the industrial setting professionals, education and training experts, qualification(job analysis) experts, facilitators, and a working group of job verification committee based on the phased range and DACUM procedure of study. The major development results of this study are as follows. First, this study selected and defined duties based on the revised classification system chart of the National Competency Standard, then drew and developed total 8 ability units based on the applicable duties. Secondly, based on the developed ability units, total 27 ability unit factors were deduced and developed. Thirdly, a standard system by ability unit factor was developed based on the level of the national competency standard and revised classification system chart, then this study deduced and developed a supra-domain of the standard system by competency units using the standard tranquility value by these competency unit factors. Based on such development contents and guidelines for the national competency standard ability unit classification number, this study deduced and developed category numbers by relevant competency unit. Fourthly, total 27 relevant performance standard by competency units and knowledge, skill, and attitude were deduced and developed. Fifthly, this study deduced and developed a scope of application, work situation, evaluation guide, core competency, and development history in reference to the total 8 relevant competency units based on the duties.

• Journal of Veterinary Clinics
• /
• v.24 no.4
• /
• pp.563-567
• /
• 2007

This study evaluated the effect of ANTORIN R-10(pFSH), a commercially available follicle stimulating hormone on ovarian morphology, on follicular development and serum estradiol levels in rats. Immature female Wistar S/T rats(27 day old; 80-100 g B.wt) maintained under controlled environmental conditions($22{\pm}2^{\circ}C$; 50% humidity; 12 h light/12 h dark cycle) with free access to standard laboratory feed and tap water were utilized. Animals were allowed to acclimatize to the new environment for at least 2 weeks before being included in the experiment. Rats were randomly allotted to 5 groups(Control, SL 0.1AU, SH 0.2AU, TL 0.1AU and TH 0.2AU). ANTORIN R-10 was subcutaneously injected twice daily for 3 days. Twenty hours after hormone treatment, blood was collected to estimate the serum estradiol $17-\beta$ concentration. Immediately, all rats were sacrificed and the ovarian morphology, ovary weight and number of follicles were recorded. Ovaries were fixed for histomorphological examination. Higher standard and treatment groups were significantly increased on ovary weight and the number of follicles more than 1mm compared with lower standard and treatment. However, no difference revealed between standard and treatment groups. ANTORIN R-10 was similar effects of follicles development and maturation compared with House standard FSH.

• Development and Reproduction
• /
• v.2 no.1
• /
• pp.69-74
• /
• 1998

The early gonadal development and sexual differentiation of Rhynchocypris oxycephalus are described from the stage of hatching to 150 days after hatching. During this peroid, the average length of the body grew from 0.64 cm to 5.96 cm. the primordial germ cells (PGCs), which could be recognized at the time of hatching, began to protrude into peritoneal cavity at a standard total length of 1.91 cm. At a standard total length of 2.29cm, initial ovarian differentiation wasidentified by the transformation of PGCs to meiotic oocytes. Finally, at the standard total length of 5.96 cm, the female gonads gradually developed towards migratory nucleus oocytes, characterisiing the maturation. Oocytes proliferated rapidly after sex differentiation while the testis entered a period of quiescence, as they continued to multiply but did not undergo growth until the standard total length of 4.00 cm. At a standard total length of 4.00 cm, spermatocytes arrested in thephase of interkinesis, Sertoli-like cells and sperm duct formation, with signs of meiotic activity, were observed. Therefore it may be concluded that R. oxycephalus belongs to the differentiated type of gonochoristic teleosts.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.965-966
• /
• 2013

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.595-595
• /
• 2006

• Journal of Internet Computing and Services
• /
• v.20 no.3
• /
• pp.69-75
• /
• 2019

The safety and performance of medical device software is managed through life-cycle processes, which represent the entire process of research and development (R&D). The life-cycle process of medical device software is represented by an international standard called IEC 62304, ISO/IEC 12207. In order to license the product, the manufacturer must have document artifacts that comply with the IEC 62304 standard. However, these standards only describe the content of the activity and do not provide a method or procedure for documentation. Therefore, this paper suggests R&D documentation guidelines that assist medical device software developers to have R&D documents conforming to the standards. For this purpose, this study identifies the requirements related to documentation among the requirements existing in the standard and extracts them in the form of guidelines showing only the core information of the requirements. In addition, through the Web framework implemented based on this research, the developer can evaluate whether the technical documents are written in accordance with the R&D document guidelines. Medical device software manufacturers can efficiently produce high-quality research and development documents through R&D documentation guidelines, and they can have standards-compliantresearch and development documentation required for licensing procedures.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.57
• /
• pp.93-102
• /
• 2000

The objective of this paper is to introduce to development of resource planning system of footwear manufacturing. The system development is to be done separately by module and each of which makes interface possible. And the final goal of the system development is to combine those modules to be ERP system covering all works from order to make, shipment, accounting. First, in this case study, introduce analysis of existing business flow and design of standard business process for development of systems. Second, describe in and out of the standard business process for shoes production and information management. Third, basic structure and design of the total system flow, configuration of completed 6 sub-systems of developing total 13 sub-system are presented. Fourth, function of software modules and principal algorithm and basic data structuring techniques o the 6 sub-systems are explained. Finally, hereafter implementation and development plans are presented.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.65-75
• /
• 2017

This study proposes development of 3U CubeSat standard platform whose function and performance are verified via KAUSAT-5 development. 3U CubeSat platform specification was selected for the design of 3U Cubesat standard platform by examining existing CubeSat and state-of-art technology, and consequently a universally usable 3U CubeSat platform was designed. Standard platform was manufactured in 1.5U size and developed with a modular concept to be able to add and expand payloads and ADCS actuators for meeting the user's needs. In addition, in case of the power system, the solar panel, the battery, and the deployment mechanism are designed to be configured by the user. In the mechanical system design of a standard platform, subsystem and micro equipment functions/performance could be integrated and miniaturized on micro-sized PCBs and maximized electrical capability to accommodate multiple payloads. In the development of the 3U CubeSat, the satellite platform adopts the developed standard platform, which can reduce the cost and schedule for the whole satellite development by reducing the additional function verification.

• Communications for Statistical Applications and Methods
• /
• v.20 no.2
• /
• pp.137-145
• /
• 2013

The use of pooled standard deviation can reduce the efficiency loss in optimum allocation when strata standard deviations are estimated and several of them are equal. Also shown is that the pooled standard deviation is useful in optimum allocation under a multivariate setting. In addition to theoretical development, we provide the result of simulation study to support the theory.