• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.47-55
• /
• 2012

This paper describes the developed HILS and test equipment in order to test the performances of MMW(Millimeter-Wave) seeker which can detect and track a high speed of short-range ballistic missile and aircraft. This system is used to 141 horn antenna array, array switching, and gain and phase control algorithm to simulate various kind of targets and trajectory of high speed and maneuver moving target. In addition, it simulates not only velocity and range for these targets but also clutter and jamming environments. System configuration and implementation and the measurement results of major subsystems such as target motion simulator, simulation signal generator, high speed data aquisition unit, and central control unit are presented. These systems could verify the detection and tracking performance of MMW seeker through dynamic real-time test based on simulation flight scenario.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.2
• /
• pp.128-135
• /
• 2013

The nuclear fuel cycle plant is composed of various subsystems such as a fuel storage and delivery system (SDS), a tokamak exhaust processing system, a hydrogen isotope separation system, and a tritium plant analytical system. Korea is sharing in the construction of the International Thermonuclear Experimental Reactor (ITER) fuel cycle plant with the EU, Japan, and the US, and is responsible for the development and supply of the SDS. Hydrogen isotopes are the main fuel for nuclear fusion reactors. Metal hydrides offer a safe and convenient method for hydrogen isotope storage. The storage of hydrogen isotopes is carried out by absorption and desorption in a metal hydride bed. These reactions require heat removal and supply respectively. Accordingly, the rapid storage and delivery of hydrogen isotopes are enabled by a rapid cooling and heating of the metal hydride bed. In this study, we designed and manufactured a vertical-type hydrogen isotope storage bed, which is used to enhance the cooling performance. We present the experimental details of the cooling performances of the bed using various cooling parameters. We also present the modeling results to estimate the heat transport phenomena. We compared the cooling performance of the bed by testing different cooling modes, such as an isolation mode, a natural convection mode, and an outer jacket helium circulation mode. We found that helium circulation mode is the most effective which was confirmed in our model calculations. Thus we can expect a more efficient bed design by employing a forced helium circulation method for new beds.

• Journal of Radiation Protection and Research
• /
• v.36 no.1
• /
• pp.35-43
• /
• 2011

The PHENIX Experiment is the largest of the four experiments that have taken data at the Relativistic Heavy Ion Collider. PHENIX, the Pioneering High Energy Nuclear Interaction eXperiment, is designed specifically to measure direct probes of the collisions such as electrons, muons, and photons. The primary goal of PHENIX is to discover and study a new state of matter called the Quark-Gluon Plasma. Among many particles, muons coming from W-boson decay gives us key information to analyze the spin of proton. Resistive plate chambers are proposed as a suitable solution as a muon trigger because of their fast response and good time resolution, flexibility in signal readout, robustness and the relatively low cost of production. The RPC detectors for upgrade were assembled and their performances were evaluated. The procedure to make the detectors better was optimized and described in detail in this thesis. The code based on ROOT was written and by using this the performance of the detectors made was evaluated, and all of the modules for north muon arm met the criteria and installation at PHENIX completed in November 2009. As RPC detectors that we made showed fast response, capacity of covering wide area with a resonable price and good spatial resolution, this will give the opportunity for applications, such as diagnosis and customs inspection system.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.6 no.2
• /
• pp.390-405
• /
• 2000

PBL is a process and an effective educational tool that empower the student to be an active participant and emphasize a clinical context for learning, developing skills in working with a group, and encouraging self-directed study. The purpose of this study was to develop the PBL module based on lung cancer case, and to evaluate after implementation. The data on lung cancer patients at C university hospital in K city were collected from interviews and nursing records in June, 1999. A PBL module was developed including situation scenarios, timetable and tutor guide. PBL course was conducted at C university for short term period (3 days) in August, 2000. Fourteen nursing students at C college were participated in this study and they were divided into two small groups. I explained them about the PBL course through a preparatory meeting. At a stage of implementation, two groups went through the same process consisting of seven steps with group meetings and self-directed study. Their performances of identifying, stating problems and presenting referred resources were evaluated and supervised by researcher. The PBL course was evaluated by them with questionnaire and essay. Most students responded positively about PBL course and preferred the tutors in a supportive attitude. However, 3 days for PBL course seemed not enough for maximal educational benefits, and many possible problems were discussed. It is necessary for nursing educators to accumulate lots of knowledge and skills regarding creating good working problems and implementing and evaluating diverse PBL tutorials to test the feasibility changing to PBL curriculum.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.149-156
• /
• 2017

This study investigates fire-retardant performances and combustion/thermal characteristics of fire-retardant treated wood by comparing them with those of fire-retardant untreated wood from the expreimental resutls of cone calorimeter and thermo-gravimetric(TG) analyzer. Hazardousness of combustion product gases for fire-retardant treated wood and untreasted wood were also observed from the results of internal finish material incombustibility test according to the Korea standard code of KS F 2271. In this study, we also tried to improve the fire retardant performance of wood by applying fire-retardant chemical composites, and to secure the fire safety performance in buildings. Red pine (Pinus densiflora) was selected as a test specimen because it is mostly used as a building material in Korea. Fire retardant chemical composites (FRCs) were prepared by mixing boron, phosphorous, and nitrogen species and treated by press-impregnation method. Water-based FRCs were composed of 3% boric acid($H_3BO_3$), 3% borax decahydrate($Na_2B_4O_7$), 8% ammonium carbonate($(NH_4)_2CO_3$), diammonium phosphate ($(NH_4)_2HPO_4$) varied from 10-30% and potassium carbonate($K_2CO_3$) varied from 10-30%. From the test results of cone calorimeter, TG analysis and gas hazard assessments, newly proposed were the optimal composition and production methods of FRCs which can sufficiently meet fire-retardant level 3 based on Korea law of construction. Thus, the FRCs, developed in this study, are anticipated to contribute to the improvement of fire safety and widespread of usage in wood as building materials.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.65-72
• /
• 2012

With the development of MEMS, small and low-priced sensors integrating IMU and GPS have produced and exploited for diverse field. In this research, we have judged that MEMS-based IMU/GPS sensor is suitable for light-weighted mobile mapping system and carried out experiments to analyze the characteristics of MTi-G, which was developed from XSens company. From a sensor which fixed to dashboard, coordinates results with no post-processing were achieved for test area. On the whole, the results show satisfactory performances but some errors also were discovered from parts of the road due to sensor properties, XKF characteristics and GPS reception environment. We could confirm the potential of light-weighted mobile mapping system. Experiments considering various GPS reception environments and road condition and more detailed level of accuracy analysis will be performed for further research.

• Asian Oncology Nursing
• /
• v.6 no.1
• /
• pp.3-14
• /
• 2006

Purpose: This study was designed to develop job description for Korean oncology APNs and assess importance, frequency, and difficulty for each of task elements listed on the job description. Method: Twenty-four oncology APNs or professors working at cancer centers or universities in Korea were enrolled in this study. They were asked to complete the questionnaires about frequencies, importances, and difficulties on the task elements for the APNs which had developed through a DACUM method. Descriptive statistics were produced by using SPSS WIN 10.0. Result: The job description of oncology APNs was identified 5 duties, 44 tasks, and 110 task elements. As for the all five duties, the average scores of the frequency, importance, and difficulty were 2.57, 2.25 and 2.52. And the role of educator was shown as the most important duty of the oncology ANPs, whereas the role of administer was the least. And the role of consultant was the most frequently performed by the oncology APNs. Conclusion: In this study, we could recognize the reality of oncology APNs' performances having wide spectrum from medical to nursing disciplines. For further verifying and improving performance, we need more precisely designed studies with more representative subjects.

• Journal of Korean Academy of Nursing
• /
• v.16 no.3
• /
• pp.67-77
• /
• 1986

The research was carried out in order to assess, at an early stage, the potential barrier in mother-child relationship in the childs' development by using the screening tool. Consequently, after modifying the Neonatal Perception Inventory developed by Broussard and testing its reliability. It has been applied to 152 mothers at the hospital of three universities in Seoul from August 1 to September 30, 1986. The data was analyzed by S.P.S.S. pro-gram and the results were as follows: 1) Mothers perceived the newborn as an individual, and evaluated their baby higher than other babies. 2) Mothers indicated difficulties in their role performance in the fellowing order-bathing, safety, detecting pain or suffering, and feeding. 3) Mothers' perception of a newborn was positive for 75% of the mothers. 4) The factor analysis of the modified tool using principal components analysis and Varimax rotation resulted in the two factors: Factor 1, Baby as an individual: Factor Ⅱ, Performances are required to meet the new-born's needs. 5) The difference in mothers' individual characteristics such as the number of childbirth, the desire to get pregnant or not, the type of deli-very, and the sex of the newborn did not influence on a mothers' perception of her newborn. As seen above, most of the mothers perceived their newborns as able individuals and expressed difficulties involved in taking care of the newborn. Also most of the mothers perceived their babies positively. My point here is, we ought to observe those mothers who perceive their babies negatively, and then compare them with those mothers who perceive their babies extremely positive or extremely negative. In the future, for more comprehensive assessment tool for maternal perception of the newborn, a repetitive verification and modification of this tool is demanded. At the same time, father's perception of the newborn should be included.

• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2012

In this research, a single-axis attitude control test bed is developed, and simulation and tests experiments are performed, as a preliminary research of a quad-rotor aerial vehicle development. A single-axis test bed with seesaw configuration is manufactured using two motors and propellers, and the aerodynamic parameters are derived by thrust tests. The response of the system is estimated with Matlab/Simulink, and experiments are performed with attitude control computer and an attitude sensor onboard the test bed. Comparing the results of simulated and tested data, factors of steady-state errors during experiments are found, and performances of used attitude control algorithm and the control computer were verified. In these process, essential preliminary data for attitude control of a quad-rotor unmanned aerial vehicle were acquired.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.8
• /
• pp.1511-1516
• /
• 2016

Sports areas of the Republic of Korea has been strengthened by the sports powers in various phases of the competition. However, not all students can succeed in greatly athlete, was necessary for these measures. This paper presents the design and implementation of mobile applications to athletic coaching leaders to record dynamic data of student athletes. Stocks applicable in this paper is basketball. The development of mobile applications can choose to 'Assist Records' menu and 'Hot & Cold Zone' menu in the Main Page. Athletic director are stored in the photo file after the screen capture to allow the map to be just athletes. To a point that can be expected can be used as the training time and increasing efficiency of the training effect through the mobile application, it will be able to widen the non-coat to improve the performances.