• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.243-260
• /
• 2018

A literature review on the effects of high temperature and radiation on radiation shielding concrete in Spent Fuel Dry Storage is presented in this study with a focus on concrete degradation. The general threshold is $95^{\circ}C$ for preventing long-term degradation from high temperature, and it is suggested that the temperature gradient should be less than $60^{\circ}C$ to avoid crack generation in concrete structures. The amount of damage depends on the characteristics of the concrete mixture, and increases with the temperature and exposure time. The tensile strength of concrete is more susceptible than the compressive strength to degradation due to high temperature. Nuclear heating from radiation can be neglected under an incident energy flux density of $10^{10}MeV{\cdot}cm^{-2}{\cdot}s^{-1}$. Neutron radiation of >$10^{19}n{\cdot}cm^{-2}$ or an integrated dose of gamma radiation exceeding $10^{10}$ rads can cause a reduction in the compressive and tensile strengths and the elastic moduli. When concrete is highly irradiated, changes in the mechanical properties are primarily caused by variation in water content resulting from high temperature, volume expansion, and crack generation. It is necessary to fully utilize previous research for effective technology development and licensing of a Korean dry storage system. This study can serve as important baseline data for developing domestic technology with regard to concrete casks of an SF (Spent Fuel) dry storage system.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.261-270
• /
• 2018

In this study, to replace the 'J-slot joint', a joint device between a disposal canister and an emplacement jig in Deep Borehole Disposal process, a novel joint device was designed and tested. The novel joint device was composed of a wedge on top of a disposal canister and a hook box at the end of a winch system. The designed joint device had merits in that it can recombine an emplaced canister freely without the replacement of the joint component. Moreover, it can be applied to various emplacement jigs such as drill pipes, wire-lines, and coiled tubing. To demonstrate the designed joint device, the joint device (${\Phi}110mm$, H 148 mm), a twin canister string (${\Phi}140mm$, H 1,105 mm), and a water tube (${\Phi}150mm$, H 1,500 mm) as a borehole model were manufactured at 1/3 scale. As deployment muds, Na-type bentonite (MX-80) and Ca-type (GJ II) bentonite muds were prepared at solid contents of 7wt% and 28wt%, respectively. The manufactured joint device showed good performance in pure water and viscous muds, with an operation speed of $10m{\cdot}min^{-1}$. It was concluded that the newly developed joint device can be used for the emplacement and retrieval of a deep disposal canister, below 3~5 km, in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.436-444
• /
• 2013

This article presents the dynamic response of nano-scale plates using the nonlocal continuum theory and higher-order shear deformation theory. The nonlocal elasticity of Eringen has ability to capture the small scale effects and the higher-order shear deformation theory has ability to capture the quadratic variation of shear strain and consequently shear stress through the plate thickness. The solutions of transient dynamic analysis of nano-scale plate are presented using these theories to illustrate the effect of nonlocal theory on dynamic response of the nano-scale plates. The relations between nonlocal and local theories are discussed by numerical results. Also, the effects of nonlocal parameters, aspect ratio, side-to-thickness ratio, size of nano-scale plate and time step on dynamic response are investigated and discussed. The amplitude and cycle increase when nonlocal parameter increase. In order to validate the present solutions, the reference solutions are used and discussed. The theoretical development as well as numerical solutions presented herein should serve as reference for nonlocal theories as applied to the transient dynamic analysis of nano-scale structures.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.5_6
• /
• pp.299-306
• /
• 2003

This paper formulates a problem of embedded real-time system re-engineering, and presents its solution approach. Embedded system re-engineering is defined as a development task of meeting performance requirements newly imposed on a system after its hardware and software have been fully implemented. The performance requirements nay include a real-time throughput and an input-to-output latency. The proposed solution approach is based on a bottleneck analysis and nonlinear optimization. The inputs to the approach include a system design specified with a process network and a set of task graphs, task allocation and scheduling, and a new real-time throughput requirement specified as a system's period constraint. The solution approach works in two steps. In the first step, it determines bottleneck precesses in the process network via estimation of process latencies. In the second step, it derives a system of constraints with performance scaling factors of processing elements being variables. It then solves the constraints for the performance staling factors with an objective of minimizing the total hardware cost of the resultant system. These scaling factors suggest the minimal cost hardware upgrade to meet the new performance requirement. Since this approach does not modify carefully designed software structures, it helps reduce the re-engineering cycle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.4
• /
• pp.490-496
• /
• 2008

The purpose of this study was to examine the qualities of breads added with 0.01%, 0.1% and 1% of Sargassum siliquastrum extracts (SSE). The result of total microbial count showed that breads with SSE were reduced with increasing storing time, especially bread with 1% SSE was reduced about 2 log cycle as compared to that of control. The moisture content of the bread added SSE and non-added bread were not significantly different during the early storage period, but after 9 days of storage, the moisture content of control was 13% decreased while that of the SSE added bread was decreased by only $5{\sim}6%$. In the color, lightness and yellowness of bread diminished with increasing amounts of SSE in bread while conversely, redness increased. In sensory evaluation, bread containing 0.01% and 0.1% SSE were preferred than the control over total preference, while bread containing 1% SSE showed the lowest preference. These results suggest that the addition of 0.1% SSE in bread had a good effect on improving the preservation and development of quality.

• The Journal of Korean Society for School & Community Health Education
• /
• v.15 no.1
• /
• pp.105-119
• /
• 2014

Objectives: This study investigates the factors influencing values on life-respect among middle school students. Methods: The participants in this study were 126 students from S middle school and Y middle school, both located in Gyeongnam province. The experimental group consisted of 40 students from S middle school, Control group-Iconsisted of 39 students from S middle school, and Control group-II consisted of 47 students from Y middle school. The experimental group was provided with 12 incidences of the life-respect education program from April 1st to June 29th. One period took 45 minutes and proceeded according to a structure of introduction, development, and consolidation. The experimental group received a life-respect education program, Control group-I received health teaching, but Control group-II didn't receive any special education except what was regularly part of their curriculum. The content of the life-respect education program included the following topics: value of life-respect, respect for human life and ethics, life-respect campaign, having a healthy mind, suicide prevention, dealing with crisis, prevention of school violence, abortion and life-respect, social weak minority consideration, death, brain death, euthanasia, life cycle and task, and forest activities. Questionnaires were administered as pre and post-tests which consisted of questions regarding death anxiety, suicide risk, and values on life-respect. The pre and post-tests were analyzed with t-tests, paired t-tests, ANOVAs, and factor analyses using SPSS 18.0. Results: 1. There was a statistically significant increase in the experimental group(p<.0001) and control group-I(p<0.05) in value and attitude about life-respect. On the other hand, it was shown that there was no difference between pre and post-test in control group-II. 2. The result of examining the differences between pre and post-tests after education on values and attitudes toward life-respect using ANCOVA showed, there was a statistically significant difference (p<0.001) among the three groups. Conclusion: the life-respect education program which was conducted over 12 meeting with middle school students had an positive effect, which can be used as basic data for fostering values on life-respect. These findings indicate that the life-respect education program this study used is effective for fostering value of life-respect and decreasing suicide risk.

• Nuclear Engineering and Technology
• /
• v.27 no.4
• /
• pp.562-570
• /
• 1995

The recent ABB/CE(Asea Brown Boveri Combustion Engineering) type pressurized oater reactor-s have the on-line monitoring system, i.e., the COLSS(core operating limit supervisory system), to prevent the specified acceptable fuel design limits from being violated during normal operation and anticipated operational occurrences. One of the main functions of COLSS is the on-line monitoring of the DNB(departure from nucleate boiling) overpower margin by calculating the MDNBR(mini-mum DNB ratio) for the measured operating condition at every second. The CETOP-D model, used in the MDNBR calculation of COLSS, is benchmarked conservatively against the TORC mod-el using an inlet flow factor of hot assembly in CETOP-D as an adjustment factor for TORC. In this study, a technique to optimize the CETOP-D inlet flow factor has been developed by elim-inating the excessive conservatism in the ABB/CE's. A correlation is introduced to account for the actual variation of the CETOP-D inlet flow factor within the core operating limits. This technique was applied to the core operating range of the YongGwang Units 3&4 Cycle 1, which results in the increase of 2％ in the DNB overpower margin at the normal operating condition, compared with that from the ABB/CE method.

• Korean Journal of Poultry Science
• /
• v.20 no.4
• /
• pp.217-231
• /
• 1993

Due to the increased awareness on the relationship between high cholesterol intake and cardiovascular disease, the development of low cholesterol eggs and egg products are necessary at the present time. Largely, two approaches are possible to develop low cholesterol eggs. The first approach is the production of low cholesterol eggs by altering feeds of layers, by administering drugs, by genetic selection of strains and breeds, and by management of laying cycle, age and egg size. The second approach is to manufacture low cholesterol eggs technically treated with adsorbant, solvent, enzyme, edible oil and supercritical fluid. Both approaches have their own pros and cons, respectively, as far as the cholesterol removal rates, the easeness of process, and the economic reasons are concerned. The low cholesterol egg production is quite labor-intensive and has relatively low cholesterol removal rate(30∼50％ ) compared to that of chemically treated eggs. On the other hand, the low cholesterol eggs treated with chemicals have a very high cholesterol removal rate (80∼90％) but some of the methods are not completely safe as food processing purposes due to the residual chemicals and the sensory quality is not as good as the low cholesterol eggs without chemical treatment. Therefore, further studies must be conducted to improve the sensory quality of low cholesterol eggs and to eliminate fear about the harmfulness using low cholesterol eggs.

• Journal of Korea Water Resources Association
• /
• v.31 no.3
• /
• pp.317-326
• /
• 1998

Water consumption characteristics on the northern part of Seoul were analyzed using wavelet transform with a base function of Coiflets 5. It turns out that long term evolution mode detected at 212 scale in 1995 was in a shape of hyperbolic tangent over the entire period due to the development of Sanggae resident site. Furthermore, there was seasonal water demand having something to do with economic cycle which reached its peak at the ends of June and December. The amount of this additional consumption was about $1,700\;\textrm{cm}^3/hr$ on June and $500\;\textrm{cm}^3/hr$ on December. It was also shown that the periods of energy containing sinusoidal component were 3.13 day, 33.33 hr, 23.98 hr and 12 hr, respectively, and the amplitude of 23.98 hr component was the most humongous. The components of relatively short frequency detected at $2^i$[i = 1,2,…12] scale were following Gaussian PDF. The most reliable predictive models are multiple AR[32,16,23] and ARMA[20, 16, 10, 23] which the input of temperature from the view point of minimized predictive error, mutual independence or residuals and the availableness of reliable meteorological data. The predicted values of water supply were quite consistent with the measured data which cast a possibility of the deployment of the predictive model developed in this study for the optimal management of water supply facilities.

• Journal of Wetlands Research
• /
• v.15 no.1
• /
• pp.9-17
• /
• 2013

Scirpus planiculmis dominated in Nakdong river estuary is known as food for birds visiting to Nakdong river estuary and plays an important role in material cycle and food web, while repeating growth and production, decomposition process in 1-year interval. Therefore, if it is able to predict effectively biomass or tuber production of Scirpus planiculmis which is food source for estuarine organisms or birds, it can provide very useful information on the Nakdong river estuary management. In this study, regression equation that can predict the tuber production, food for birds, was obtained using initial density of Scirpus planiculmis that can minimize the disturbance of ecosystem and is faster and easier. The correlation analysis results show that density, biomass and tuber production have liner relationship(p<0.001) with 0.6103~0.9950 of correlation coefficients. In addition, the regression equations have high coefficients of determination of 0.3696~0.7145 and it shows that it is able to predict biomass or tuber production while using the estimated regression equation obtained from relationship among the initial density, biomass and tuber production. The results of this study are expected to utilize effectively the management of estuary ecosystem such as management on food source for migratory birds visiting to Nakdong river estuary.