• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.125-132
• /
• 2007

The purpose of present paper is to investigate a fracture characteristics of the finite-width single-edge-notch(SEN) carbon fiber/epoxy reinforced plastics(CFRP) plates by using an acoustic emission(AE). Uni-directionally oriented 10 plies CFRPs specimen which had different notch length were prepared for monotonic tensile test. Matrix cracking appeared over whole testing process and fiber breaking appeared later on mainly Load distribution factor of the matrix confirmed that increased according as increases of plate width ratio. The amplitude distribution of AE signal from a specimens is an aid to the determination of the different fracture mechanism such as matrix cracking, disbonding, interfacial delamination, fiber pull-out, fiber breaking, and etc. In the result of AE amplitude distribution analysis, matrix cracking, fiber disbonding or interfacial delamination, and fiber pull-out or fiber breaking signal correspond to <65dB, <75dB, and <90dB respectively, Also, changes of the slope of cumulative AE energy represented crazing phenomena or degradation of materials.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.48-51
• /
• 2004

The estimation of NC machining time is of significance since it provides shop floor engineers with information for the determination of the productivity of the floor as well as process schedules. The NC machining time commonly depends on NC programs since they have various important information such as tool positions, feed rates, and other miscellaneous functions. Thus, nominal NC machining time can be easily acquired based on the programs. Actual machining time, however, cannot be simply obtained because of the dynamic characteristics of a NC machine controller such as acceleration and deceleration. Hence, this study presents a NC machine time estimation model for sculptured surfaces, considering the dynamic characteristics. The estimation model uses the distribution of NC blocks according to a factor influencing the machining time. Finally, machining time is estimated by a statistical machining time estimation model representing the relationship between the block distribution and the machining time. The parameters in the model are searched out by a genetic algorithm.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.114-122
• /
• 2013

This study introduces an optimization methodology for the determination of gate location that ensures the melt flow balance within a part cavity of injection mold. A new sequential direct-search scheme based on the recursive reduction of the designer-specified gate design area is developed, and it is integrated with a commercial flow simulation tool for optimization. To quantify the level of melt flow balance, we employ the maximum difference among the fill times for the melt fronts to reach the boundary elements of part cavity as objective function. The proposed methodology is successfully applied in the case study of melt flow balancing in molding of a bar code scanner model. The result shows that the melt flow balance at the optimized gate positions is significantly improved from that for the initial gate position.

• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.87-92
• /
• 2013

In this study, we carried out the turning of plastic mold steel(STAVAX) with whisker reinforced ceramic tool(WA1) and analyzed ANOVA(Analysis of Variance) test. Multi-regression analysis was performed to find influential factors to surface roughness and to derive regression equation. Results are follows: From ANOVA test and confidence interval analysis of surface roughness, We found that influential factors to surface roughness was feed rate, cutting speed and depth of cut in order. From multi-regression analysis, we derived regression equation of STAVAX. it's coefficient of determination($R^2$) was 0.945 and It means that regression equation is significant. From experimental verification, we confirmed that surface roughness was predictable by regression equation. Compared with former research, we confirmed that increase of feed rate is the main cause of the growing of surface roughness and cutting force.

• 생약학회지
• /
• 제38권4호
• /
• pp.321-326
• /
• 2007

For the propose of the quality control of Torilis Fructus, one major compound was isolated by several column chromatograpies and identified by its spectral data as torilin (8,11-dihydroxy-8-angeloyl-11-acetyl-4-guaien-3-one). A quantitative analysis of torilin using HPLC method showed that the average contents at 230 and 254 nm were $7.167{\pm}0.168mg/g\;and\;7.052{\pm}0.160mg/g$, respectively, in 18 samples collected throughout the regions of Korea and China. This method provided a tool for standardization of the commercial Torilis Fructus.

• 대한임상검사과학회지
• /
• 제39권3호
• /
• pp.147-150
• /
• 2007

Most expressed HLA (human leukocyte antigen) loci exhibit a remarkable degree of allelic polymorphism, which derives from sequence differences predominantly localized to discrete hypervariable regions of the amino terminal domain of the molecule. In this study, the HLA-B genotypes were determined in twenty students unrelated koreans using the PCR-SSP (polymerase chain reaction-sequence specific primer) technique. Several specific primer pairs in assigning the HLA-B gene were used ($B^{\ast}4001/4007$, $B^{\ast}4901/5001/4501$, $B^{\ast}3701$, $B^{\ast}5801$). The results of PCR-SSP, the HLA-B3701 primer was detected one (5%), the $HLA-B^{\ast}5801$ were detected four (20%), the $HLA-B^{\ast}4001/4007$ were detected nineteen (95%) and the $HLA-B^{\ast}4901/5001/4501$ were detected twenty. This study shows that the PCR-SSP technique is relatively simple, fast and a practical tool for the determination of the HLA-B genotypes. Moreover, these results genotype frequency of the HLA-B gene could be useful for database study before being applied to individual identification and transplantation immunity.

• Wind and Structures
• /
• 제19권3호
• /
• pp.295-320
• /
• 2014

Starting from an overview on the research on thunderstorms in the last forty years, this paper provides a general discussion on some emerging issues and new frameworks for wind loading on structures in mixed climates. Omitting for sake of simplicity tropical cyclones and tornadoes, three main aspects are pointed out. The first concerns the separation and classification of different intense wind events into extra-tropical depressions, thunderstorms and gust fronts, with the aim of improving the interpretation of the phenomena of engineering interest, the probabilistic analysis of the maximum wind velocity, the determination of the wind-induced response and the safety format for structures. The second deals with the use of the response spectrum technique, not only as a potentially efficient tool for calculating the structural response to thunderstorms, but also as a mean for revisiting the whole wind-excited response in a more general and comprehensive framework. The third involves the statistical analysis of extreme wind velocities in mixed climates, pointing out some shortcomings of the approaches currently used for evaluating wind loading on structures and depicting a new scenario for a more rational scheme aiming to pursue structural safety. The paper is set in the spirit of mostly simplified analyses and mainly qualitative remarks, in order to capture the conceptual aspects of the problems dealt with and put on the table ideas open to discussion and further developments.

• 한국농공학회지
• /
• 제45권6호
• /
• pp.119-127
• /
• 2003

This paper documents recent efforts to validate the GIS-based hydrologic models, HEC-HMS and HEC-GeoHMS by the US Army Corps of Engineers. HMS and Geo-HMS were used to simulate storm runoff from a small rural watershed, the Balan HS#6. The watershed is 3.85 $\textrm{km}^2$ in size. The watershed topographic, soils, and land use data were processed using the GIS tool fur the models. Input parameters were retrieved and calibrated with the field data. The simulated peak runoff, time to peak, and total direct runoff fer twenty three storms were compared with the observed data. The results showed that the coefficient of determination($R^2$) for the observed peak runoff was 0.95 and an error, RMSE, 3.08 $\textrm{m}^3$/s for calibration stages. In the model verifications, $R^2$ was 0.89 and RMSE 6.79 $\textrm{m}^3$/s, which were slightly less accurate than the calibrated data. The simulated flood hydrographs were well compared to the observed. It was concluded that HMS and GeoHMS are applicable to flood analyses for rural watersheds.

• 한국농공학회논문집
• /
• 제53권5호
• /
• pp.35-42
• /
• 2011

This study is to check the applicability of SWAT-APEX (Soil and Water Assessment Tool-Agricultural Policy / Environmental eXtender) model as combined watershed and field models by applying the APEX to paddies in a watershed (465.1 $km^2$) including Yedang reservoir. Firstly, the SWAT were calibrated with 3 years (2000~2002) daily streamflow and monthly water quality (T-N and T-P) data, and validated for another 3 years (2003~2005) data. The average Nash-Sutcliffe model efficiency (ME) of streamflow during validation was 0.73, and the coefficient of determination ($R^2$) of T-N and T-P were 0.77 and 0.73 respectively. Next, running the SWAT-APEX model with the SWAT calibrated parameters for paddies, the $R^2$ of T-N and T-P were 0.80 and 0.76 respectively. The results showed that SWAT-APEX model was more correctly predicted for T-N and T-P loads than SWAT model. The difference results between watershed and field models was predicted to have substantial impact on NPS loads, especially on T-N and T-P loads. Therefore, to improve negative NPS load simulations should be considered the model characteristics as simulating mechanism to properly select the NPS model for agricultural watershed.

• Journal of Microbiology and Biotechnology
• /
• 제16권5호
• /
• pp.724-730
• /
• 2006

A sequence characterized amplified region (SCAR) marker, which was tightly linked with the A1 mating type locus in Phytophthora infestans, was developed. During the random amplified polymorphic DNA-based phylogenic studies of 33 isolates of P infestans collected from year 2002 to 2004, we found an A1 mating type-specific DNA fragment. This 573-bp DNA fragment was generated only in the genomic DNA of the A1 mating types, when OPC-5 primer was used. Based on the specific DNA sequence, we designed the primer sets for generating the A1 mating type-specific 569-bp DNA fragment. When 33 genomic DNAs of P. infestans were subjected to PCR amplification using different primer combinations, the A1 mating type-specific DNA was amplified, when LB-1F and LB-2R primers were used. The specific 569-bp DNA fragment was generated only from all 18 A1 strains, but not from 15 A2 mating type strains. These results corresponded to the mating type discriminating bioassay of 33 isolates of P. infestans. Therefore, the primer combination of LB-1F/LB2R was chosen as a SCAR marker. Overall, this study indicates that the SCAR marker could be developed into a useful tool for mating type determination of P. infestans.