• Journal of The Korean Radiological Technologist Association
• /
• v.27 no.2
• /
• pp.66-85
• /
• 2001

In medical equipments as complex as a computed tomographic equipment, routine quality control procedures are essential to the detection of small pathologic change in soft tissue as well as and the maintenance of optimal image quality. This study was condu

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.252-261
• /
• 2014

A Bayesian network (BN) based fault diagnosis framework for semiconductor etching equipment is presented. Suggested framework contains data preprocessing, data synchronization, time series modeling, and BN inference, and the established BNs show the cause and effect relationship in the equipment module level. Statistically significant state variable identification (SVID) data of etch equipment are preselected using principal component analysis (PCA) and derivative dynamic time warping (DDTW) is employed for data synchronization. Elman's recurrent neural networks (ERNNs) for individual SVID parameters are constructed, and the predicted errors of ERNNs are then used for assigning prior conditional probability in BN inference of the fault diagnosis. For the demonstration of the proposed methodology, 300 mm etch equipment model is reconstructed in subsystem levels, and several fault diagnosis scenarios are considered. BNs for the equipment fault diagnosis consists of three layers of nodes, such as root cause (RC), module (M), and data parameter (DP), and the constructed BN illustrates how the observed fault is related with possible root causes. Four out of five different types of fault scenarios are successfully diagnosed with the proposed inference methodology.

• International Journal of Safety
• /
• v.10 no.1
• /
• pp.36-40
• /
• 2011

Personnel maintaining or repairing the railway tracks or signaling facilities around tracks may experience the sensory disorder when doing maintenance works at the trackside of railway for long time. In this case personnel maintaining at the trackside may collide with the train since they cannot recognize the approach of motor-car although it approaches to the vicinity of maintenance workplace because of the sensory block phenomenon occurred due to their long hours of continued monotonous maintenance work. In order to prevent such motor-car accidents that may occur because railway track workers are unable to recognize the approaching train, the safety alarm equipment is developed to make the approaching motor-car send radio signals and bidirectional detection mechanism between approaching train and trackside personnel. It shows the possibility of utilization in various forms of safety equipment for workers only to the safety helmet to be worn by the maintenance workers while using the configuration of transmitting/receiving sides. In the paper it is represented new alarm equipment, which is the bone-anchored speaker-based safety helmet to be worn by the maintenance workers.

• Journal of Internet Computing and Services
• /
• v.21 no.2
• /
• pp.9-18
• /
• 2020

In the field of image processing, a method of detecting and counting passengers as moving objects when getting on and off the bus has been studied. Among these technologies, one of the artificial intelligence techniques, the deep learning technique is used. As another method, a method of detecting an object using a stereo vision camera is also used. However, these techniques require expensive hardware equipment because of the computational complexity of used to detect objects. However, most video equipments have a significant decrease in computational processing power, and thus, in order to detect passengers on the bus, there is a need for an image processing technology suitable for various equipment using a relatively low computational technique. Therefore, in this paper, we propose a technique that can efficiently obtain the number of passengers on the bus by detecting the contour of the object through the background subtraction suitable for low-cost equipment. Experiments have shown that passengers were counted with approximately 70% accuracy on lower-end machines than those equipped with stereo vision camera.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1029-1032
• /
• 2008

Nowadays, the necessity of the NDT technique for concrete structure has been increased due to maintenance of infra-structure. With this reason, NDT detecting technique has been considered as a effective maintenance method to prevent the rapid degradation of the infra-structure. In this study, to investigate the internal defect of concrete structure, ultrasonic detection device and radar equipment was applied then tested in laboratory and field. In the result of the experimental test, the internal cavity and steel arrangement can be detected and it was possible to adopt the ultrasonic detection method to the maintenance of concrete structure. And an algorithm for performing the maintenance procedure of concrete structure applying ultrasonic detection device and radar equipment was developed and suggested in this study.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.3
• /
• pp.68-72
• /
• 2009

Millions of landmines still have been buried in various countries around the world. Unfortunately, landmines make the correct detection of humanitarian organizations very difficult. For this purpose, new technologies such as improved sensors, efficient manipulators and mobile robots are needed. Our effort is to develop a small mobile robot for landmine detection. The mobile robot consists of sensor module, GPS, RF communications equipment, IR camera, motors, and controllers, etc. This paper describes the current configuration of development in landmine detecting tracked robot. Specifically we are concerned with the sensor module of the mobile robot. Our results show that graphs have measured a small metal instead of a real landmine because of the big danger of students experiments on detection with real landmines.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.95.2-95
• /
• 2002

1. Introduction of Camera Detection system Camera Detection system is an equipment that can detect realtime traffic information by image processing techniques. This information can be used to analyze and control road traffic flow. It is also used as a method to detect and control traffic flow for ITS(Intelligent Transportation System). Traffic information includes speed, head way, traffic flow, occupation time and length of queue. There are many detection systems for traffic data. But video detection system can detect multiple lanes with only one camera and collect various traffic information. So it is thought to be the most efficient method of all detection system. Though the...

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.392-398
• /
• 2013

As the essential techniques for the CD (Critical Dimension) measurement of the LCD pattern, there are various modules such as an optics design, auto-focus [1-4], and precise edge detection. Since the operation of image enhancement to improve the CD measurement repeatability, a ring type of the reflected lighting optics is devised. It has a simpler structure than the transmission light optics, but it delivers the same output. The edge detection is the most essential function of the CD measurements. The CD measurement is a vital inspection for LCDs [5-6] and semiconductors [7-8] to improve the production yield rate, there are numbers of techniques to measure the CD. So in this study, a new subpixel algorithm is developed through facet modeling, which complements the previous sub-pixel edge detection algorithm. Currently this CD measurement system is being used in LCD manufacturing systems for repeatability of less than 30 nm.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.204-208
• /
• 2016

This paper demonstrates the key parameter detection for smelting of submerged arc furnace (SAF) based on magnetic field radiation. A magnetic field radiation model for the inner structure of SAF is established based on relative theory of electromagnetic field. A simple equipment of 3D magnetic field detection system is developed by theoretical derivation and simulation. The experiments are carried out under the environment of industrial field and AC magnetic field generated by electrode currents and molten currents in the furnace is reflected outside of the furnace. The experimental results show that the key parameters of smelting including the position of electrode tip, the length of electric arc, and the liquid level of molten bath can be achieved. The computed tomography for SAF can be realized by the detection for smelting.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.599-608
• /
• 2017

Cracks on the asphalt road surface can affect the speed of the car, the consumption of fuel, the ride quality of the road, and the durability of the road surface. Such cracks in roads can lead to very dangerous consequences for long periods of time. To prevent such risks, it is necessary to identify cracks and take appropriate action. It takes too much time and money to do it. Also, it is difficult to use expensive laser equipment vehicles for initial cost and equipment operation. In this paper, we propose an effective detection method of road surface defect using ROI (Region of Interest) setting and cany edge detection method using UAV image. The results of this study can be presented as efficient method for road surface flaw detection and maintenance using UAV. In addition, it can be used to detect cracks such as various buildings and civil engineering structures such as buildings, outer walls, large-scale storage tanks other than roads, and cost reduction effect can be expected.