• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.288-300
• /
• 2015

Since the first jack-up was built, jackups have become the most popular type of mobile offshore drilling unit (MODU) for offshore exploration and development purposes in shallow water. The most pivotal component of the jack-up unit is the leg, which can directly affect the global performance of the unit. In this paper, an investigation into extending the length of the jack up leg is carried out in order to study the enhancement of the rig capability to drill in deeper water approaching the range of the Semisubmersible Drilling Unit (SSDU) (300-1000ft). A study of the performance of a deep-water jack-up unit is performed with different leg lengths. Typical leg scantling dimensions and identical external loads are assigned, and then a detailed Finite Element Analysis (FEA) model is created in order to simulate the jack-up leg unit's structural behavior. A Multi-point Constraint (MPC) element together with the spring element is used to deal with the boundary conditions. Finally, a comparative analysis for five leg lengths is carried out to illustrate their performance, including the ultimate static strength, and weight.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1401-1406
• /
• 2013

This study tested the feasibility of observing H/D exchange of intact protein by top-down electron capture dissociation (ECD) mass spectrometry for the investigation of protein structure. Ubiquitin is selected as a model system. Local structural information was obtained from the deuteration levels of c and $z^{\cdot}$ ions generated from ECD. Our results showed that ${\alpha}$-helix region has the lowest deuteration level and the C-terminal fraction containing a highly mobile tail has the highest deuteration level, which correlates well with previous X-Ray and HDX/NMR analyses. We studied site-specific H/D exchange kinetics by monitoring H/D exchange rate of several structural motives of ubiquitin. Two hydrogen bonded ${\beta}$-strands showed similar HDX rates. However, the outer ${\beta}$-strand always has higher deuteration level than the inner ${\beta}$-strand. The HDX rate of the turn structure (residues 8-11) is lower than that of ${\beta}$-strands (residues 1-7 and residues 12-17) it connects. Although isotopic distribution gets broader after H/D exchange which results in a limited number of backbone cleavage sites detected, our results demonstrate that this method can provide valuable detailed structural information of proteins. This approach should also be suitable for the structural investigation of other unknown proteins, protein conformational changes, as well as protein-protein interactions and dynamics.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.1457-1461
• /
• 2013

The $Fe_3O_4$-core and Ag-shell ($Fe_3O_4@Ag$ nanoeggs) were prepared through the encapsulation of 3-aminopropyltriethoxysilane-coated magnetite nanoparticle in nano-Ag shell by a simple chemically controlled procedure. The $Fe_3O_4@Ag$ nanoeggs were characterized by scanning electron microscopy, transmission electron microscopy, UV-vis spectrum and superconducting quantum interference device magnetometer, respectively. A detailed analysis is provided of how the hydrolysis and condensation of 3-aminopropyltriethoxysilane and the pH value are vital in fabricating the $Fe_3O_4@Ag$ nanoeggs. The prepared $Fe_3O_4@Ag$ nanoeggs possessed uniform size, improved monodispersity, stability against aggregation and high magnetization, which were utilized for the detection of latent fingerprints deposited onto different surfaces. The experimental results showed that the latent fingerprints developed with the $Fe_3O_4@Ag$ nanoeggs powders exhibited excellent ridge details with minimal background staining.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.5 s.66
• /
• pp.34-42
• /
• 2005

The cable connection zone of the cable-stayed bridge transfers deal-load, live-load, and second-load to the cables on the structural joint zone of the cables and the main girders are the most critical parts in which big cable tensile forces are generated by those loads. Therefore, it is necessary to thoroughly check the main girder, structurally to secure the required stability. Because of the heavy tensile force of cables linked in the connection zone of the cable-stayed bridge, locally concentrated stress, as well as the dispersion of stress, occurs in the structurally contacted point of cable and main girder thus, we need to make a thorough investigation through a detailed structural analysis. Directly delivering the tensile force to the connection zone of the cable, the consequently big effect in the tensile force fluctuation caused by the live-load will make it necessary to review the fatigue strength. As the connection zone of the cable is designed to resist the tensile force of the cable, which is applied to a connecting section as a concentrated force, thick plates are used. These plates are frequently made of welded structure, thus, the investigation of the welding workability is inevitable.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.11a
• /
• pp.49-53
• /
• 2007

Children's museum has roles of the characterized place for children as well as the museum for education. Therefore, specific color selection especially for children is one of the most important points to be considered. This study is the short investigation on various interior color systems of children's museums in Korea. In case of Children's Museum in National Museum of Korea, each exhibition area is apparently divided by adopting colors in accord with the subject of each space. Middle color in that museum generally gives stability, and clear color and accent color give better perception and vitality Children's folk Museum has adopted Korean traditional colors, O-Bang Colors, which have indicated Korean tradition for ages. All sections in Incheon Children's Museum are spatially divided, but similar colors of ceiling, wall, and floor give boring atmosphere. Since original colors of furniture in Science section distract attraction of children, proper color selection should be required for better reaction from children. Therefore, this research is aiming for detailed investigation in color system of children's museum and the proper interior color planning of the next children's museums with their main purpose for children in the future.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.12-17
• /
• 2004

By using an experimental approach recently developed to determine the torque-tension relationship for bearing frictional characteristics of several typical bolted joints were studied. The experimental approach allows the direct determination of the bearing friction between the nut and its bearing surface. Detailed friction studies were made on the influences of the size and shape of the hole, the use of a slot in a bolted joint, contact area and position, and other factors such as turning speed, coating, and the use of wax on the bearing surface. The contact area and position of the washer have a marginal effect on the bearing friction. The organic coating on the nuts reduces the bearing friction significantly. Nuts with organic coating over a washer with zinc finish provide the smallest and the most consistent bearing friction. The results from the experimental investigation will be helpful for the better design of bolted joints bearing friction. The results from the experimental investigation Will be helpful for the better design of bolted joints.

• Earthquakes and Structures
• /
• v.19 no.6
• /
• pp.485-498
• /
• 2020

Non-ductile detailing of Reinforced Concrete (RC) frames may lead to structural failure when the structure is subjected to earthquake response. These designs are generally encountered in older RC frames constructed prior to the introduction of the ductility aspect. The failure observed in the beam-column joints (BCJs) and accompanied by excessive column damage. This work examines the seismic performance and failure mode of non-ductile designed RC columns and exterior BCJs. The design was based on the actual building in Tainan City, Taiwan, that collapsed due to the 2016 Meinong earthquake. Hence, an experimental investigation using cyclic testing was performed on two columns and two BCJ specimens scaled down to 50%. The experiment resulted in a poor response in both specimens. Excessive cracks and their propagation due to the incursion of the lateral loads could be observed close to the top and bottom of the specimens. Joint shear failure appeared in the joints. The ductility of the member was below the desired value of 4. This is the minimum number required to survive an earthquake with a similar magnitude to that of El Centro. The evidence provides an understanding of the seismic failure of poorly detailed RC frame structures.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.571-583
• /
• 2022

On 7 August 2020, a large-scale catastrophic landslide was triggered by extreme rainfall at Osan village, Gokseong County, South Jeolla Province, South Korea. The initiation mechanism of the Gokseong landslide was different from those typical landslides that occurred in South Korea. Despite the relatively low elevation and slope degree, the landslide had a long runout distance of about 640 m over a total vertical distance of 90 m. A detailed field investigation and chemical analysis were conducted to understand the possible mechanisms for the high-speed and long-runout behavior of the landslide. The terrain controlled the motion behavior of the landslide and the seepage was observed at the whole landslide body. The clay-rich soils covered on granite bedrock of the landslide deposition area from the rice paddy field to the landslide crown. The results of this study may provide basic data for further research on the mechanisms for landslide initiation and propagation.

• Development and Reproduction
• /
• v.27 no.3
• /
• pp.159-165
• /
• 2023

The Ruvb-like AAA ATPase1 (Ruvbl1; also known as Pontin) is an evolutionary conserved protein belonging to the adenosine triphosphates associated with diverse cellular activities (AAA+) superfamily of ATPases. Ruvbl1 is a component of various protein supercomplexes and is involved in a variety of cellular activities, including chromatin remodeling, DNA damage repair, and mitotic spindle assembly however, the developmental significance of this protein is unknown and needs detailed investigation. We investigated the developmental significance of Ruvbl1 in multiciliated cells of the Xenopus laevis epidermis since ruvbl1 is expressed in the multiciliated cells and pronephros during X. laevis embryogenesis. The knockdown of ruvbl1 significantly impaired cilia-driven fluid flow and basal body polarity in the X. laevis epidermis compared to control embryos, but did not affect cilia morphology. Our results suggest that Ruvbl1 plays a significant role in embryonic development by regulating ciliary beating; however, further investigation is needed to determine the mechanisms involved.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.3
• /
• pp.242-252
• /
• 2024

This study introduces a prototype for a virtual zoo initiative, aimed at optimizing resource utilization and minimizing animal displacement from their natural habitats. The prototype features a thoughtfully developed three-dimensional representation of an emperor penguin, with animations designed to emulate real-life behaviors. An investigation into file format distinctions for scientific research, encompassing Wavefront(OBJ), Collada(DAE), and Filmbox(FBX) formats, was conducted. The research utilized the Hololens 2 device for visualization, Unity for environment development, Blender for modeling, and C# for programming, with deployment facilitated through Visual Studio 2019 and the Mixed Reality Toolkit. Empirical examination revealed the OBJ format's suitability for simple geometric shapes, while DAE and FBX formats were preferred for intricate models and animations. DAE files offer detailed preservation of object structure and animations albeit with larger file sizes, whereas FBX files provide compactness but may face scalability constraints due to extensive data integration. This investigation underscores the potential of virtual zoos for conservation and education, advocating for further exploration and context-specific implementation.