Browse > Article
http://dx.doi.org/10.12989/eas.2020.19.6.485

Seismic performance of non-ductile detailing RC frames: An experimental investigation  

Hidayat, Banu A. (Department of Civil Engineering, College of Engineering, National Cheng Kung University)
Hu, Hsuan-Teh (Department of Civil Engineering, College of Engineering, National Cheng Kung University)
Hsiao, Fu-Pei (Department of Civil Engineering, College of Engineering, National Cheng Kung University)
Han, Ay Lie (Department of Civil Engineering, Faculty of Engineering, Diponegoro University)
Pita, Panapa (Department of Civil Engineering, College of Engineering, National Cheng Kung University)
Haryanto, Yanuar (Department of Civil Engineering, College of Engineering, National Cheng Kung University)
Publication Information
Earthquakes and Structures / v.19, no.6, 2020 , pp. 485-498 More about this Journal
Abstract
Non-ductile detailing of Reinforced Concrete (RC) frames may lead to structural failure when the structure is subjected to earthquake response. These designs are generally encountered in older RC frames constructed prior to the introduction of the ductility aspect. The failure observed in the beam-column joints (BCJs) and accompanied by excessive column damage. This work examines the seismic performance and failure mode of non-ductile designed RC columns and exterior BCJs. The design was based on the actual building in Tainan City, Taiwan, that collapsed due to the 2016 Meinong earthquake. Hence, an experimental investigation using cyclic testing was performed on two columns and two BCJ specimens scaled down to 50%. The experiment resulted in a poor response in both specimens. Excessive cracks and their propagation due to the incursion of the lateral loads could be observed close to the top and bottom of the specimens. Joint shear failure appeared in the joints. The ductility of the member was below the desired value of 4. This is the minimum number required to survive an earthquake with a similar magnitude to that of El Centro. The evidence provides an understanding of the seismic failure of poorly detailed RC frame structures.
Keywords
columns; beam-column joints; quasi-static cyclic test; non-ductile detailing; plastic hinges;
Citations & Related Records
Times Cited By KSCI : 12  (Citation Analysis)
연도 인용수 순위
1 Xue, Q. (2000), "Need of performance-based earthquake engineering in Taiwan: a lesson from the Chi-chi earthquake", Earthq. Eng. Struct. D., 29, 1609-1627.   DOI
2 Yang, M. and Zhang, C. (2019), "Comparative study on retrofitting strategies for residential buildings after earthquakes", Earthq. Struct., 16(4), 375-389. http://dx.doi.org/10.12989/eas.2019.16.4.375.   DOI
3 Yen, J.Y. and Chien, H.K. (2004), "Plated RC beam-column joints under cyclic loading", J. Chin. Inst. Eng., 27(5), 641-650. https://doi.org/10.1080/02533839.2004.9670912.   DOI
4 Yon, B. (2020), "Seismic vulnerability assessment of RC buildings according to the 2007 and 2018 Turkish seismic codes", Earthq. Struct., 18(6), 709-718. http://dx.doi.org/10.12989/eas.2020.18.6.709.   DOI
5 Zepeda, D. and Hagen, G. (2016), "Lessons learned from the 2016 Taiwan Mei-nong earthquake", Proceedings of the Structural Engineers Association of California Convention, Taipei, Taiwan, October.
6 ASTM C39/C39M-20 (2020), "Standard test method for compressive strength of cylindrical concrete specimens", Amer. Soc. Testing Mater, U.S.A. https://doi.org/10.1520/C0039_C0039M-20.
7 ACI 318-19 (2019), Building code requirements for structural concrete and commentary, American Concrete Institute; Farmington Hills, MI, U.S.A.
8 ACI 374.1-05 (2019), Acceptance criteria for moment frames based on structural testing and commentary (reapproved 2019), American Concrete Institute; Farmington Hills, MI, U.S.A.
9 ACI 374.2R-13 (2013), Guide for testing reinforced concrete structural elements under slowly applied simulated seismic loads, American Concrete Institute; Farmington Hills, MI, U.S.A.
10 Barbagallo, F., Hamashima, I., Hu, H., Kurata, M. and Nakashima, M. (2017), "Base shear capping buildings with graphite-lubricated bases for collapse prevention in extreme earthquake", Earthq. Eng. Struct. D., 46, 1003-1021. https://doi.org/10.1002/eqe.2842.   DOI
11 Esteghamati, M.Z., Banazadeh, M. and Huang, Q. (2018), "The effect of design drift limit on the seismic performance of RC dual high-rise buildings", Struct. Des. Tall Spec., 27, 1464. https://doi.org/10.1002/tal.1464.   DOI
12 Benavent-Climent, A. and Zahran, R. (2010), "Seismic evaluation of existing RC frames with wide beams using an energy-based approach", Earthq. Struct., 1(1), 93-108. http://dx.doi.org/10.12989/eas.2010.1.1.093.   DOI
13 Blume, J.A., Newmark, N.M. and Corning, L.H. (1961), Design of Multistory Reinforced Concrete Buildings for Earthquake Motions, Portland Cement Association, Skokie, U.S.A.
14 Cardone, D. and Flora, A. (2016), "An alternative approach for the seismic rehabilitation RC of existing buildings using seismic isolation", Earthq. Eng. Struct. D., 4, 91-111. https://doi.org/10.1002/eqe.2618.   DOI
15 Faleschini, F., Bragolusi, P., Zanini, M.A., Zampieri, P. and Pellegrino, C. (2017), "Experimental and numerical investigation on the cyclic behavior of RC beam column joints with EAF slag concrete", Eng. Struct., 152, 332-347. https://doi.org/10.1016/j.engstruct.2017.09.022.   DOI
16 Hsiao, F.P., Wang, J.C. and Chiou, Y.J. (2008), "Shear strengthening of reinforced concrete framed shear walls using CFRP strips", Proceedings of the 14th World Conference on Eearthquake Engineering, Beijing, China, October.
17 Haach, V.G., De Cresce El Debs, A.L.H. and El Debs, M.K. (2008), "Evaluation of the influence of the column axial load on the behavior of monotonically loaded R/C exterior beam-column joints through numerical simulations", Eng. Struct., 30(4), 965-975. https://doi.org/10.1016/j.engstruct.2007.06.005.   DOI
18 Hakuto, S., Park, R. and Tanaka, H. (2000), "Seismic load tests on interior and exterior beam-column joints with substandard reinforcing details", ACI Struct. J., 97(1), 11-25.
19 Haryanto, Y., Hu, H.T., Han, A.L., Atmajayanti, A.T., Galuh, D.L.C. and Hidayat, B.A. (2019), "Finite element analysis of Tsection RC beams strengthened by wire rope in the negative moment region with an addition of steel rebar at the compression block", J. Teknol., 81(4), 143-154. https://doi.org/10.11113/jt.v81.12974.   DOI
20 Hsiao, F.P., Oktavianus, Y., Ou, Y.C., Luu, C.H. and Hwang, S.J. (2015), "A pushover seismic analysis and retrofitting method applied to low-rise RC school buildings", Adv. Struct. Eng., 18(3), 311-324. https://doi.org/10.1260/1369-4332.18.3.311.   DOI
21 Hsu, T.Y. and Pham, Q.V. (2019), "Post-earthquake assessment of buildings using displacement and acceleration response", Earthq. Struct., 17(6), 599-609. http://dx.doi.org/10.12989/eas.2019.17.6.599.   DOI
22 Kalogeropoulos, G.I., Tsonos, A.D.G., Konstantinidis, D. and Iakovidis, P.E. (2019), "Earthquake-resistant rehabilitation of existing RC structures using high-strength steel fiber-reinforced concrete jackets", Earthq. Struct., 17(1), 115-129. http://dx.doi.org/10.12989/eas.2019.17.1.115.   DOI
23 Huang, R.Y.C., Kuang, J.S. and Behnam, H. (2018), "Shear strength of exterior wide beam-column joints with different beam reinforcement ratios", J. Earthq. Eng., 1-23. https://doi.org/10.1080/13632469.2018.1545711.   DOI
24 Kaku, T. and Asakusa, H. (1991), "Bond and anchorage of bars in reinforced concrete beam-column joints. Design of beam-column joints for seismic resistance", ACI SP-123, American Concrete Institute, Detroit, U.S.A.
25 Kaku, T. and Asakusa, H. (1991), "Ductility estimation of exterior beam column sub-assemblages in RC frames. Design of beam column joints for seismic resistance", ACI SP-123, American Concrete Institute, Detroit, U.S.A.
26 Li, B., Siu-Shum Lam, E., Wu, B. and Wang, Y.Y. (2015), "Effect of high axial load on seismic behavior of reinforced concrete beam-column joints with and without strengthening", ACI Struct. J., 112(6), 713-724. https://doi.org/10.14359/51687938.   DOI
27 Mo, Y.L. and Wang, S.J. (2000), "Seismic behavior of RC columns with various tie configurations", J. Struct. Eng., 126, 112-1130.
28 Liao, W.C., Perceka, W. and Wang, M. (2017), "Experimental study of cyclic behavior of high-strength reinforced concrete columns with different transverse reinforcement detailing configurations", Eng. Struct., 153, 290-301. https://doi.org/10.1016/j.engstruct.2017.10.011.   DOI
29 Lu, X., Lu, X., Guan, H. and Ye, L. (2013), "Collapse simulation of reinforced concrete high-rise building induced by extreme earthquakes", Earthq. Eng. Struct. D., 42, 705-723. https://doi.org/10.1002/eqe.2240.   DOI
30 Lu, X., Urukap, T.H., Li, S. and Lin, F. (2012), "Seismic behavior of interior RC beam-column joints with additional bars under cyclic loading", Earthq. Struct., 3(1), 37-57. http://dx.doi.org/10.12989/eas.2012.3.1.037.   DOI
31 Morais, M. and Burgoyne, C. (2001), "Energy dissipation in sections prestressed with FRP tendons", Proceedings of the Conference of Composites in Constructions, Porto, Portugal, October.
32 Pampanin, S., Magenes, G. and Carr, A. (2003), Modelling of Shear Hinge Mechanism in Poorly Detailed RC Beam-column Joints, Concrete Structures in Seismic Regions, Athens, Greece.
33 Pantazopoulou, S. and Bonacci, J. (1992), "Consideration of questions about beam-column joints", ACI Struct. J., 89(1), 27-36. https://doi.org/10.14359/1281.   DOI
34 Pantelides, C.P., Lawrence, R.D., Hansen, J. and Nadauld, J. (2002), Assessment of Reinforced Concrete Building Exterior Joints with Substandard Details, Pacific Earthquake Engineering Research Center, California, U.S.A.
35 Park, R. and Paulay, T. (1973), "Behaviour of reinforced concrete external beam-column joints under cyclic loading", Proceedings of the 5th World Conference on Earthquake Engineering, Rome, Italia, June.
36 Shafaei, J., Hisseini, A. and Marefat, M.S. (2014), "Seismic retrofit of external RC beam-column joints by joint enlargement prestressed steel angles", Eng. Struct., 81, 265-288. https://doi.org/10.1016/j.engstruct.2014.10.006.   DOI
37 Paulay, T. (1989), "Equilibrium criteria for reinforced concrete beam-column joints", ACI Struct. J., 86(6), 635-643. https://doi.org/10.14359/2649.   DOI
38 Paulay, T. and Priestley, M.J.N. (1992), Seismic Design of Reinforced Concrete and Masonry Buildings, John Wiley & Sons, New York, U.S.A. https://doi.org/10.1002/9780470172841.
39 Qeshta, I.M., Shafigh, P., Jumaat, M.Z., Abdulla, I.A., Ibrahim, Z. and Alengaram, U.J. (2014), "The use of wire mesh-epoxy composite for enhancing the fexural performance of concrete beams", Mater. Des., 60, 250-259. https://doi.org/v.   DOI
40 Rajput, A. and Sharma, K. (2017), "Seismic behavior of under confined square reinforced concrete columns", Struct., 13, 26-35. https://doi.org/10.1016/j.istruc.2017.10.005.   DOI
41 Sharma, A., Reddy, G.R., Vaze, K.K. and Eligehausen, R. (2013), "Pushover experiment and analysis of a full scale non-seismically detailed RC structure", Eng. Struct., 46, 218-233. https://doi.org/10.1016/j.engstruct.2012.08.006.   DOI
42 Sheikh, S.A., Shah, D.V. and Khoury, S.S. (1994), "Confinement of high-strength concrete columns", ACI Struct. J., 91, 100-111.
43 Shen, W.C., Hsiao, F.P., Tsai, R.J., Weng, P.W., Li, Y.A. and Hwang, S.J. (2019), "Shaking table test of a reduced-scale reinforced concrete structure subjected to near-fault ground motion", Proceedings of the Pacific Conference on Earthquake Engineering, Auckland, New Zealand, April.
44 Tudjono, S., Han, A.L. and Hidayat, B.A. (2015), "An experimental study to the influence of fiber-reinforced polymer (FRP) confinement on beams subjected to bending and shear", Procedia Eng., 125, 1070-1075. https://doi.org/10.1016/j.proeng.2015.11.164.   DOI
45 Shen, W.C., Hsiao, F.P., Weng, P.W., Li, Y.A., Chou, C.C. and Chung, L.L. (2018), "Seismic tests of a mixed-use residential and commercial building using a novel shaking table", Proceedings of the 11th US National Conference on Earthquake Engineering, Los Angelos, USA, June.
46 Shiravand, M.R., Nashtaee, M.A. and Veismoradi, S. (2017), "Seismic assessment of concrete buildings reinforced with shape memory alloy materials in different stories", Struct. Des. Tall. Spec., 26, 1384. https://doi.org/10.1002/tal.1384.   DOI
47 Surana, M. (2019), "Evaluation of seismic design provisions for acceleration-sensitive non-structural components", Earthq. Struct., 16(5), 611-623. http://dx.doi.org/10.12989/eas.2019.16.5.611.   DOI
48 Tsai, K.C., Hsiao, C.P. and Bruneau, M. (2000), "Overview of building damages in the 921 Chi-chi earthquake", Earthq. Eng. Eng. Seism., 2(1), 93-108.
49 Tudjono, S., Han, A.L. and Gan, B.S. (2018), "An integrated system for enhancing flexural members' capacity via combinations of the fiber-reinforced plastic use, retrofitting, and surface treatment techniques", Int. J. Technol., 1, 5-15. https://doi.org/10.14716/ijtech.v9i1.298.   DOI
50 Wong, H. (2005), "Shear strength and seismic performance of non-seismically designed reinforced concrete beam-column joints", Ph.D. Dissertation, Hong Kong University of Science and Technology, Hong Kong. https://doi.org/10.14711/thesisb914043.
51 Xiao, Y., Zeng, L., Chen, Y., Du, G., Zhang, J. and Chen, J. (2019), "Seismic fragility analysis of concrete encased framereinforced concrete core tube hybrid structure based on quasistatic cyclic test", Struct. Des. Tall Spec., 28, 1665. https://doi.org/10.1002/tal.1665.   DOI